Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com?
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Cc: Alexander Graf <agraf@suse.de>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

checkpatch currently loops on fpu/softfloat.c
Turns out this is fixed in the Linux version of checkpatch.

So this is a port of Andy Whitcrofts fix from Linux,
Original commit was commit 89a883530fe7 ("checkpatch: ## is not a
valid modifier")

As suggested by Peter Maydell for the QEMU version we drop the last "|"
as there seems to be no need for that. (FWIW, the kernel discusion about
that dried out:
http://www.spinics.net/lists/kernel/msg1944421.html
)

Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <1444291524-66569-1-git-send-email-borntraeger@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

As the comment in kvm_set_phys_mem() says, KVM works in page size chunks.
However it uses hardcoded TARGET_PAGE_SIZE which is 4K on most platforms
while actual host may use different page size, for example, PPC64 hosts
use 64K system pages.

This replaces static TARGET_PAGE_SIZE with run-time calculated
qemu_real_host_page_size.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <1444102257-17405-1-git-send-email-aik@ozlabs.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The header is included from basically everywhere, thanks to cpu.h.
It should be moved to the (TCG only) files that actually need it.
As a start, remove non-TCG stuff.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

HV_X64_MSR_VP_RUNTIME msr used by guest to get
"the time the virtual processor consumes running guest code,
and the time the associated logical processor spends running
hypervisor code on behalf of that guest."

Calculation of that time is performed by task_cputime_adjusted()
for vcpu task by KVM side.
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <1442397584-16698-4-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Hyper-V features bit HV_X64_MSR_VP_INDEX_AVAILABLE value is
based on cpu option "hv-vpindex" and kernel support of
HV_X64_MSR_VP_INDEX.
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <1442397584-16698-3-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

HV_X64_MSR_RESET msr is used by Hyper-V based Windows guest
to reset guest VM by hypervisor. This msr is stateless so
no migration/fetch/update is required.

This code checks cpu option "hv-reset" and support by
kernel. If both conditions are met appropriate Hyper-V features
cpuid bit is set.
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <1442397584-16698-2-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

linux-headers/linux/vhost.h is currently out of sync with Linux.  Do
not touch it in this update.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The style here seems to be split according to the maintainer, but
traditionally open braces were placed on typedef lines.
Suggested-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Gather up all the fields currently in CPUState which deal with the CPU's
AddressSpace into a separate CPUAddressSpace struct. This paves the way
for allowing the CPU to know about more than one AddressSpace.

The rearrangement also allows us to make the MemoryListener a directly
embedded object in the CPUAddressSpace (it could not be embedded in
CPUState because 'struct MemoryListener' isn't defined for the user-only
builds). This allows us to resolve the FIXME in tcg_commit() by going
directly from the MemoryListener to the CPUAddressSpace.

This patch extracts the actual update of the cached dispatch pointer
from cpu_reload_memory_map() (which is renamed accordingly to
cpu_reloading_memory_map() as it is only responsible for breaking
cpu-exec.c's RCU critical section now). This lets us keep the definition
of the CPUAddressSpace struct private to exec.c.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-Id: <1443709790-25180-4-git-send-email-peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The reason for cpu_reload_memory_map()'s RCU operations is not
so much because the guest could make the critical section very
long, but that it could have a critical section within which
it made an arbitrary number of changes to the memory map and
thus accumulate an unbounded amount of memory data structures
awaiting reclamation. Clarify the comment to make this clearer.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-Id: <1443709790-25180-3-git-send-email-peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently we call cpu_reload_memory_map() from cpu_exec_init(),
but this is not necessary:
 * KVM doesn't use the data structures maintained by
   cpu_reload_memory_map() (the TLB and cpu->memory_dispatch)
 * for TCG, we will call this function via tcg_commit() either
   as soon as tcg_cpu_address_space_init() registers the listener,
   or when the first MemoryRegion is added to the AddressSpace
   if the AS is empty when we register the listener

The unnecessary call is awkward for adding support for multiple
address spaces per CPU, so drop it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Message-Id: <1443709790-25180-2-git-send-email-peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

RHEL-6 and SLES-11 provide Python 2.6.  It'll also work on OS X back
to 10.6.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1441396383-17304-1-git-send-email-armbru@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

There are two bugs here.  First, the 16-bit id loses the high 8 bits
when shifted left by 24.  Second, the address must be combined with
an "or" or we just get zero.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Simplify memory allocation by sticking with a single API.  GSlice
is not that fast anyway (tcmalloc/jemalloc are better).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Simplify memory allocation by sticking with a single API.  GSlice
is not that fast anyway (tcmalloc/jemalloc are better).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Pull request

v2:
 * Fix virtio 16lx -> HWADDR_PRIx format specifier [Peter]

# gpg: Signature made Mon 12 Oct 2015 11:19:06 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  sdhci.c: Limit the maximum block size
  block: switch from g_slice allocator to malloc
  virtio dataplane: adapt dataplane for virtio Version 1
  virtio-blk: use blk_io_plug/unplug for Linux AIO batching
  sdhci: Pass drive parameter to sdhci-pci via qdev property
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Mon 12 Oct 2015 08:56:47 BST using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  tests: add test cases for netfilter object
  netfilter: add a netbuffer filter
  net/queue: export qemu_net_queue_append_iov
  netfilter: print filter info associate with the netdev
  netfilter: add an API to pass the packet to next filter
  net/queue: introduce NetQueueDeliverFunc
  net: merge qemu_deliver_packet and qemu_deliver_packet_iov
  netfilter: hook packets before net queue send
  init/cleanup of netfilter object
  vl.c: init delayed object after net_init_clients
  vmxnet3: Add support for VMXNET3_CMD_GET_ADAPTIVE_RING_INFO command
  e1000: use alias for default model
  vmxnet3: Support reading IMR registers on bar0
  net/vmxnet3: Refine l2 header validation
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

It is possible for the guest to set an invalid block
size which is larger then the fifo_buffer[] array. This
could cause a buffer overflow.

To avoid this limit the maximum size of the blksize variable.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reported-by: NIntel Security ATR <secure@intel.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: abe4c51f513290bbb85d1ee271cb1a3d463d7561.1444067470.git.alistair.francis@xilinx.com
Suggested-by: NIgor Mitsyanko <i.mitsyanko@gmail.com>
Reported-by: NIntel Security ATR <secure@intel.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Simplify memory allocation by sticking with a single API.  GSlice
is not that fast anyway (tcmalloc/jemalloc are better).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Let dataplane allocate different region for the desc/avail/used
ring regions.
Take VIRTIO_RING_F_EVENT_IDX into account to increase the used/avail
rings accordingly.

[Fix 32-bit builds by changing 16lx format specifier to HWADDR_PRIx.
--Stefan]
Signed-off-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Tested-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Message-id: 1441625636-23773-1-git-send-email-pmorel@linux.vnet.ibm.com
(changed __virtio16 into uint16_t,
 map descriptor table and available ring read-only)
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Fix device introspection regressions

# gpg: Signature made Fri 09 Oct 2015 14:43:41 BST using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"

* remotes/armbru/tags/pull-monitor-2015-10-09:
  Revert "qdev: Use qdev_get_device_class() for -device <type>,help"
  qdev: Protect device-list-properties against broken devices
  qmp: Fix device-list-properties not to crash for abstract device
  device-introspect-test: New, covering device introspection
  libqtest: New hmp() & friends
  libqtest: Clean up unused QTestState member sigact_old
  tests: Fix how qom-test is run
  macio: move DBDMA_init from instance_init to realize
  hw: do not pass NULL to memory_region_init from instance_init
  memory: allow destroying a non-empty MemoryRegion
  virtio-input: Fix device introspection on non-Linux hosts
  update-linux-headers: Rename SW_MAX to SW_MAX_
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The raw-posix block driver implements Linux AIO batching so multiple
requests can be submitted with a single io_submit(2) system call.
Batching is currently only used by virtio-scsi and
virtio-blk-data-plane.

Enable batching for regular virtio-blk so the number of io_submit(2)
system calls is reduced for workloads with queue depth > 1.

In 4KB random read performance tests with queue depth 32, the CPU
utilization on the host is reduced by 9.4%.  The fio job is as follows:

  [global]
  bs=4k
  ioengine=libaio
  iodepth=32
  direct=1
  sync=0
  time_based=1
  runtime=30
  clocksource=gettimeofday
  ramp_time=5

  [job1]
  rw=randread
  filename=/dev/vdb
  size=4096M
  write_bw_log=fio
  write_iops_log=fio
  write_lat_log=fio
  log_avg_msec=1000

This benchmark was run on an raw image on LVM.  The disk was an SSD
drive and -drive cache=none,aio=native was used.
Tested-by: NPradeep Surisetty <psuriset@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>

Commit 19109131 disabled the sdhci-pci support because it used
drive_get_next().  This patch reenables sdhci-pci and changes it to
pass the drive via a qdev property - for example:
 -device sdhci-pci,drive=drive0 -drive id=drive0,if=sd,file=myimage
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin O'Connor <kevin@koconnor.net>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Using qtest qmp interface to implement following cases:
1) add/remove netfilter
2) add a netfilter then delete the netdev
3) add/remove more than one netfilters
4) add more than one netfilters and then delete the netdev
Signed-off-by: NYang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

This filter is to buffer/release packets. Can be used when using
MicroCheckpointing or other Remus like VM FT solutions.
You can also use it to crudely simulate network delay.  Doesn't
actually delay individual packets, but batches them together, which is
a delay of sorts.

Usage:
 -netdev tap,id=bn0
 -object filter-buffer,id=f0,netdev=bn0,queue=rx,interval=1000

NOTE:
 Interval is in microseconds, it can't be omitted currently, and can't be 0.
Signed-off-by: NYang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

This will be used by buffer filter implementation later to
queue packets.
Signed-off-by: NYang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

When execute "info network", print filter info also.
add a info_str member to NetFilterState, store specific filters
info.
Signed-off-by: NYang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

add an API qemu_netfilter_pass_to_next() to pass the packet
to next filter.
Signed-off-by: NYang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

net/queue.c has logic to send/queue/flush packets but a
qemu_deliver_packet_iov() call is hardcoded. Abstract this
func so that we can use our own deliver function in netfilter.
Signed-off-by: NYang Hongyang <yanghy@cn.fujitsu.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

qemu_deliver_packet_iov already have the compat delivery, we
can drop qemu_deliver_packet.
Signed-off-by: NYang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Capture packets that will be sent.
Signed-off-by: NYang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Add a netfilter object based on QOM.

A netfilter is attached to a netdev, captures all network packets
that pass through the netdev. When we delete the netdev, we also
delete the netfilter object attached to it, because if the netdev is
removed, the filter which attached to it is useless.
Signed-off-by: NYang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Init delayed object after net_init_clients, because netfilters need
to be initialized after net clients initialized.
Signed-off-by: NYang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Some drivers (e.g. vmware-tools) issue the VMXNET3_CMD_GET_ADAPTIVE_RING_INFO
command.

Currently, due to lack of support, a bogus value (-1) is returned.

Support this command, returning the "adaptive-ring disabled" flag.
Signed-off-by: NShmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Instead of duplicating the "e1000-82540em" device model as "e1000",
make the latter an alias for the former.

Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Instead of asserting, return the actual IMR register value.
This is aligned with what's returned on ESXi.
Signed-off-by: NShmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Tested-by: NDana Rubin <dana.rubin@ravellosystems.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

Validation of l2 header length assumed minimal packet size as
eth_header + 2 * vlan_header regardless of the actual protocol.

This caused crash for valid non-IP packets shorter than 22 bytes, as
'tx_pkt->packet_type' hasn't been assigned for such packets, and
'vmxnet3_on_tx_done_update_stats()' expects it to be properly set.

Refine header length validation in 'vmxnet_tx_pkt_parse_headers'.
Check its return value during packet processing flow.

As a side effect, in case IPv4 and IPv6 header validation failure,
corrupt packets will be dropped.
Signed-off-by: NDana Rubin <dana.rubin@ravellosystems.com>
Signed-off-by: NShmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>

virtio-gpu: add 3d rendering support using virgl, misc fixes.
ui/gtk: add opengl context and scanout support (for virtio-gpu).

# gpg: Signature made Thu 08 Oct 2015 10:35:39 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-virgl-20151008-1:
  gtk/opengl: add opengl context and scanout support (GtkGLArea)
  gtk/opengl: add opengl context and scanout support (egl)
  opengl: add egl-context.[ch] helpers
  virtio-gpu: add cursor update tracepoint
  virtio-gpu: add 3d mode and virgl rendering support.
  virtio-gpu: update headers for virgl/3d
  virtio-gpu: change licence from GPLv2 to GPLv2+
  virtio-gpu: move iov free to virtio_gpu_cleanup_mapping_iov
  ui/console: add opengl context and scanout support interfaces.
  sdl2: stop flickering
  shaders: initialize vertexes once
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>