linux-headers: update from kvm/next

linux-headers/linux/vhost.h is currently out of sync with Linux.  Do
not touch it in this update.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

include/standard-headers/asm-x86/hyperv.h

@@ -153,6 +153,12 @@
 /* MSR used to provide vcpu index */
 #define HV_X64_MSR_VP_INDEX			0x40000002
 
+/* MSR used to reset the guest OS. */
+#define HV_X64_MSR_RESET			0x40000003
+
+/* MSR used to provide vcpu runtime in 100ns units */
+#define HV_X64_MSR_VP_RUNTIME			0x40000010
+
 /* MSR used to read the per-partition time reference counter */
 #define HV_X64_MSR_TIME_REF_COUNT		0x40000020
 

linux-headers/asm-arm64/kvm.h

@@ -53,14 +53,20 @@ struct kvm_regs {
 	struct user_fpsimd_state fp_regs;
 };
 
-/* Supported Processor Types */
+/*
+ * Supported CPU Targets - Adding a new target type is not recommended,
+ * unless there are some special registers not supported by the
+ * genericv8 syreg table.
+ */
 #define KVM_ARM_TARGET_AEM_V8		0
 #define KVM_ARM_TARGET_FOUNDATION_V8	1
 #define KVM_ARM_TARGET_CORTEX_A57	2
 #define KVM_ARM_TARGET_XGENE_POTENZA	3
 #define KVM_ARM_TARGET_CORTEX_A53	4
+/* Generic ARM v8 target */
+#define KVM_ARM_TARGET_GENERIC_V8	5
 
-#define KVM_ARM_NUM_TARGETS		5
+#define KVM_ARM_NUM_TARGETS		6
 
 /* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */
 #define KVM_ARM_DEVICE_TYPE_SHIFT	0
@@ -100,12 +106,39 @@ struct kvm_sregs {
 struct kvm_fpu {
 };
 
+/*
+ * See v8 ARM ARM D7.3: Debug Registers
+ *
+ * The architectural limit is 16 debug registers of each type although
+ * in practice there are usually less (see ID_AA64DFR0_EL1).
+ *
+ * Although the control registers are architecturally defined as 32
+ * bits wide we use a 64 bit structure here to keep parity with
+ * KVM_GET/SET_ONE_REG behaviour which treats all system registers as
+ * 64 bit values. It also allows for the possibility of the
+ * architecture expanding the control registers without having to
+ * change the userspace ABI.
+ */
+#define KVM_ARM_MAX_DBG_REGS 16
 struct kvm_guest_debug_arch {
+	__u64 dbg_bcr[KVM_ARM_MAX_DBG_REGS];
+	__u64 dbg_bvr[KVM_ARM_MAX_DBG_REGS];
+	__u64 dbg_wcr[KVM_ARM_MAX_DBG_REGS];
+	__u64 dbg_wvr[KVM_ARM_MAX_DBG_REGS];
 };
 
 struct kvm_debug_exit_arch {
+	__u32 hsr;
+	__u64 far;	/* used for watchpoints */
 };
 
+/*
+ * Architecture specific defines for kvm_guest_debug->control
+ */
+
+#define KVM_GUESTDBG_USE_SW_BP		(1 << 16)
+#define KVM_GUESTDBG_USE_HW		(1 << 17)
+
 struct kvm_sync_regs {
 };
 

linux-headers/linux/kvm.h

@@ -183,6 +183,7 @@ struct kvm_s390_skeys {
 #define KVM_EXIT_EPR              23
 #define KVM_EXIT_SYSTEM_EVENT     24
 #define KVM_EXIT_S390_STSI        25
+#define KVM_EXIT_IOAPIC_EOI       26
 
 /* For KVM_EXIT_INTERNAL_ERROR */
 /* Emulate instruction failed. */
@@ -237,6 +238,7 @@ struct kvm_run {
 			__u32 count;
 			__u64 data_offset; /* relative to kvm_run start */
 		} io;
+		/* KVM_EXIT_DEBUG */
 		struct {
 			struct kvm_debug_exit_arch arch;
 		} debug;
@@ -285,6 +287,7 @@ struct kvm_run {
 			__u32 data;
 			__u8  is_write;
 		} dcr;
+		/* KVM_EXIT_INTERNAL_ERROR */
 		struct {
 			__u32 suberror;
 			/* Available with KVM_CAP_INTERNAL_ERROR_DATA: */
@@ -295,6 +298,7 @@ struct kvm_run {
 		struct {
 			__u64 gprs[32];
 		} osi;
+		/* KVM_EXIT_PAPR_HCALL */
 		struct {
 			__u64 nr;
 			__u64 ret;
@@ -330,6 +334,10 @@ struct kvm_run {
 			__u8 sel1;
 			__u16 sel2;
 		} s390_stsi;
+		/* KVM_EXIT_IOAPIC_EOI */
+		struct {
+			__u8 vector;
+		} eoi;
 		/* Fix the size of the union. */
 		char padding[256];
 	};
@@ -819,6 +827,10 @@ struct kvm_ppc_smmu_info {
 #define KVM_CAP_DISABLE_QUIRKS 116
 #define KVM_CAP_X86_SMM 117
 #define KVM_CAP_MULTI_ADDRESS_SPACE 118
+#define KVM_CAP_GUEST_DEBUG_HW_BPS 119
+#define KVM_CAP_GUEST_DEBUG_HW_WPS 120
+#define KVM_CAP_SPLIT_IRQCHIP 121
+#define KVM_CAP_IOEVENTFD_ANY_LENGTH 122
 
 #ifdef KVM_CAP_IRQ_ROUTING