This patch disintegrates cpu_dump_state_ucf64 function from cpu_dump_state.
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch just splits ucf64 instruction simulation helpers from
helper.c.
Also, two checkpatch warnings are solved.

v1->v2: adjust copyright information for new ucf64_helper.c
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch sets is_default to 1 for puv3 machine, so that
find_default_machine() returns puv3 machine.
Thanks Dunrong for pointing it out.

Cc: Dunrong Huang <riegamaths@gmail.com>
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch adds ps2/keyboard support, and enables CONFIG_PCKBD.
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch adds puv3 dma (Direct Memory Access) support,
include dma device simulation for kernel booting.

v1->v2: Add initialization to ret in puv3_dma_read.
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch adds puv3 pm (power management) support,
include pm device simulation for kernel booting.
Thank Blue Swirl for pointing out the missing "break".

v1->v2: Add initialization to ret in puv3_pm_read.
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch adds puv3 gpio (General Purpose Input/Output) support,
include gpio device simulation and its interrupt support.

v1->v2: Add initialization to ret in puv3_gpio_read.
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch adds puv3 ostimer support, include os timer
device simulation and ptimer support in puv3 machine.
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch adds puv3 interrupt support, include interrupt controler
device simulation and interrupt handler in puv3 machine.
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch only add puv3 soc/board support, which introduces puv3
machine description, and specifies console type.
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

As a matter of course, we need to access user space in kernel code,
so we need to correct load/store decoders to indicate correct memory
region.
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch implements softmmu specific functions, include tlb_fill,
switch_mode, do_interrupt and uc32_cpu_handle_mmu_fault.
So the full exception handlers and page table walking could work now.
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Any code that depends on a particular CPU type can now go through
callbacks on the QOM UniCore32CPUClass.

Signed-off-by: Andreas Färber <afaerber@suse.de
Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch initializes the cpuid to exactly correct value because
linux kernel will check it.
In addition, the exception types are specified in proper situations.
Then it could make exceptions generated correctly and timely.
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Coprocessor 0 is system control coprocessor, and we need get/set its contents.
Also, all cache/tlb ops shoule be implemented here, but just ignored with no harm.

Coprocessor 1 is OCD (on-chip-debugger), which is used for faked console,
so we could output chars to this console without graphic card.
TODO: curses display should be added lator for screen output.
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch adds unicore32-softmmu build support, include configure,
makefile, arch_init, and all missing functions needed by softmmu.
Although all missing functions are empty, unicore32-softmmu could
be build successfully.
By 20120804: change QEMU_ARCH_UNICORE32 to 0x4000
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

A command line device probe using just -device "?" gets processed
after qemu-kvm initializes the accelerator. If /dev/kvm is not
present, the accelerator check will fail (kvm is defaulted to on),
which causes libvirt to not be set up to handle qemu guests.

Moving the device help handling before the accelerator set up allows
the device probe to work in this configuration and libvirt succeeds
in setting up for a qemu hypervisor mode.
Signed-off-by: NBruce Rogers <brogers@suse.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'x86cpu_qom_tcg_v2' of git://github.com/imammedo/qemu:
  target-i386: move tcg initialization into x86_cpu_initfn()
  cleanup cpu_set_debug_excp_handler
  target-xtensa: drop usage of prev_debug_excp_handler
  target-i386: drop usage of prev_debug_excp_handler

qemu_rearm_alarm_timer partially duplicates the code in
qemu_next_alarm_deadline to figure out if it needs to rearm the timer.
If it calls qemu_next_alarm_deadline, it always rearms the timer even if
the next deadline is INT64_MAX.

This patch simplifies the behavior of qemu_rearm_alarm_timer and removes
the duplicated code, always calling qemu_next_alarm_deadline and only
rearming the timer if the deadline is less than INT64_MAX.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Tested-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This fixes the following error:

    $ qemu-system-xtensa -cpu help
    Segmentation fault
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This makes usable default for -cpu option both for qemu-system-xtensa
and qemu-system-xtensaeb fixing the following error:

    $ qemu-system-xtensaeb -M sim
    Unable to find CPU definition
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Tested-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

 This change addresses a problem where QEMU incorrectly traps on
floating-point MADD group instructions with SIGILL, at least while
emulating MIPS32r2 processors.  These instructions use the COP1X major
opcode and include ones like:

	madd.d	$f2,$f4,$f2,$f6

 Here's Nathan's original analysis of the problem:

"QEMU essentially does:

  d = find_cpu (cpu_string)	// get CPU definition
  fpu_init (env, d)		// initialize fpu state (init FCR0, basically)
  cpu_reset (env)

...and the cpu_reset call clears all interesting state that fpu_init
setup, then proceeds to reinitialize all the CP0 registers...but not
FCR0."

 I have verified this change with system emulation running the GDB test
suite for the mips-sde-elf target (o32, big endian, 24Kf CPU emulated),
there were 55 progressions and no regressions.
Signed-off-by: NMaciej W. Rozycki <macro@codesourcery.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

LOAD_UNLOAD and START_STOP have same value, so the table
entry is initialized twice. Spotted by Clang compiler.

Remove LOAD_UNLOAD entry since START_STOP entry already
represents both.
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Statement s=s; makes little sense, remove it. Spotted by Clang
compiler.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Global register AREG0 was always assumed to be usable in user-exec.c,
but this is incorrect for several targets.

Fix with #ifdeffery and by using other variables.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Clang compiler complained about use of reserved word 'restrict' in SLIRP
and QAPI.

Prefix C keywords with "q_", adjust SLIRP accordingly.
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

err was uninitialized, it's not OK to use |=. Spotted by Clang
compiler.

Fix by implementing the earlier statement which initializes the variable.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The qemu_irq for Terminal Count (TC) line between FDC and Slavio misc
device was created only after use, spotted by Clang compiler. Also,
it was not created if the FDC didn't exist.

Rearrange code to fix order. Always create the TC line.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Difference with AMD PCscsi is that DC-390 contains a EEPROM,
and that a romfile is available to add INT13 support.

This has been successfully tested on:
- MS DOS 6.22 (using DC390 ASPI driver)
- MS Windows 98 SE (using DC390 driver)
- MS Windows NT 3.1 (using DC390 driver)
- MS Windows NT 4.0 (using DC390 driver)
- hard disk and cdrom boot
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This reverts commit 0883c515.

Those stubs were only used by PCI ESP emulation, which is now
not compiled on architectures which have no PCI bus support.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

sparc machines loose ability to instanciate PCI ESP SCSI adapter,
which is not a big loose as they don't have PCI bus support.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

These will be used by next commits.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* kraxel/usb.58:
  usb-storage: fix SYNCHRONIZE_CACHE
  usb-storage: improve debug logging

* kwolf/for-anthony:
  qemu-img: use QemuOpts instead of QEMUOptionParameter in resize function
  qemu-iotests: Be more flexible with image creation options
  qemu-iotests: add 039 qcow2 lazy refcounts test
  qemu-io: add "abort" command to simulate program crash
  qcow2: implement lazy refcounts
  qemu-iotests: ignore qemu-img create lazy_refcounts output
  docs: add lazy refcounts bit to qcow2 specification
  qcow2: introduce dirty bit
  docs: add dirty bit to qcow2 specification
  qemu-iotests: add qed.py image manipulation utility
  qapi: generalize documentation of streaming commands
  ide scsi: Mess with geometry only for hard disk devices

Commit 59310659 is incomplete,
we'll arrive in the scsi command complete callback in CSW state
and must handle that case correctly.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

in_addr_t isn't available on mingw32.  Just use an unsigned long instead.  I
considered typedef'ing in_addr_t on mingw32 but this would potentially be
brittle if mingw32 did introduce the type.

Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NDong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

qemu-iotests already filters out image creation options that may be
present or not in order to get the same output in both cases. However,
often it only considers the default value of the option. Cover all valid
values instead so that ./check -o name=value can be used successfull for
all of them.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>