Currently, we preload option roms into the option rom space in memory.  This
prevents DDIM from functioning correctly which severely limits the number
of roms we can support.

This patch introduces a pci_add_option_rom() which registers the
PCI_ROM_ADDRESS bar which points to our option rom.  It also converts over
the cirrus vga adapter, the rtl8139, virtio, and the e1000 to use this
new mechanism.

The result is that PXE boot functions even with three unique types of cards.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit 0ea5709a.

Per discussion with Michael Tsirkin, this is too risky for 0.12
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Interrupt disable bit is mandatory in PCI spec.
Implement it to make devices spec compliant.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NIsaku Yamahata <yamahata@valinux.co.jp>

interrupt status is a mandatory feature in PCI spec,
so devices must implement it to be spec compliant.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NIsaku Yamahata <yamahata@valinux.co.jp>

This rearranges code in preparation for interrupt state
implementation.
Changes:
	- split up bus walk away from interrupt handling
          into a subroutine
	- change irq_state from an array to bitmask
	- verify that irq_state values are 0 or 1 on load

There are no functional changes.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NIsaku Yamahata <yamahata@valinux.co.jp>

pci code had a TODO to move apb specific
pci bridge initialization to apb_pci.
Implement this and remove the TODO.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

- fix bridge prefetchable memory accesser to check 64bit or not.
- use pcibus_t consistently instead mixing pcibus_t and uint64_t.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch removes unused constants committed by
fb231628.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch removes some comment which should go into commit log
in pci.h.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch renames pci_find_host_bus() to pci_find_root_bus()
as suggested by "Michael S. Tsirkin" <mst@redhat.com>.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Now pci host stuff has been moved from pci.[hc] to pci_host.[hc]
so the declaration of pci_data_{read, write}() should be in
pci_host.h
This patch moves them from pci.h to pci_host.h for consistency.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

pci.h declares some functions which aren't
defined in pci.h. Clean up moving things
to appropriate headers, and update all users.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch implements pci bridge filtering.

TODO: currently almost all the map funcions assumes
filtered_size == size and addr & ~(size - 1) == addr.
However with bridge filtering, they aren't always true.
Teach them such cases, such that filtered_size < size and
addr & (size - 1) != 0.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

- Only sets default subsystem id for header type 00.(normal header type)
  because header type 01 doesn't have subsystem id, and uses the register
  for other purpose. So setting default subsystem id doesn't make sense.

- initialize wmask more for header type 01.(bridge header type)
  Without those wmasks, linux was confused not boot,
  and lspci was confused not to print out expected IO/memory range.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

add helper function to check ranges overlap suggested by
Michael S. Tsirkin <mst@redhat.com>.
His original suggestion was to use [first, last], however I chosen
to use offset, length pair, i.e. [offset, offset + length)
because pci configuration space related functions all uses offset and length
pair, so it helps to avoid to type constant twice.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds common routines for pcie host bridge and pcie mmcfg.
This will be used by q35 based chipset emulation.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

change the first argument, void *opaque to PCIBus *s
of the pci_data_{read, write}.
They aren't used as direct callback so the argument type
don't have to be void*. So change it to the right type.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch sorts out/enhances pci code to track pci bus topology
more accurately.
- Track host bus bridge with pci domain number. Although the
  current qemu implementation supports only pci domian 0 yet.
- Track pci bridge parent-child relationship.
When looking down from pci host bus for pci sub bus, be aware of
secondary bus/subordinate bus.
Thus pci configuration transaction is more accurately emulated.

This patch adds new member to PCIBus to track pci bus topology.
Since qdev already tracks down bus relationship, those new member
wouldn't be necessary.
However it would be addressed later because not all the pci device
isn't converted to qdev yet.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

implemented pci 64bit bar support.
The tricky bit is pci_update_mapping().
An OS is allowed to set the BAR such that OS can't address the area
pointed by BAR. It doesn't make sense, though.
In that case, don't map the BAR.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch is preliminary for 64bit bar.
For 64bit bar support, change pcibus_t which represents
pci bus addr/size from uint32_t to uint64_t.
And also change FMT_pcibus for printf.

In pci_update_mapping() checks 32bit overflow.
So the check must be updated too.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch is preliminary for 64bit BAR.
Later pcibus_t will be changed from uint32_t to uint64_t.
Introduce FMT_PCIBUS for printf format for pcibus_t.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch is preliminary for 64 bit BAR support.
Introduce dedicated type, pcibus_t, to represent pci bus address/size
instead of uint32_t.
Later this type will be changed to uint64_t.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

make pci_bar() aware of header type 1. When PCI_ROM_SLOT
it should return PCI_ROM_ADDRESS1 (!= PCI_ROM_ADDRESS)
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

make constants for pci base address match pci_regs.h by
renaming PCI_ADDRESS_SPACE_xxx to PCI_BASE_ADDRESS_SPACE_xxx.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

add helper functions to get/set PCIDevice::config
Those will be used later.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

define a constant to represent a unmapped bar instead of -1 and use it.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

introduce constant PCI_NUM_PINS for the number of interrupt pins, 4.
and use it.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit 0148fde5.

As requested by Luiz.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It's qdev_create() specialized for PCI, so name it accordingly.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Monitor command "pci_add ADDR nic model=MODEL" uses pci_nic_init() to
create the NIC.  When MODEL is unknown or "?", this prints to stderr
and terminates the program.

Change pci_nic_init() not to treat "?" specially, and to return NULL
on failure.  Switch uses during startup to new convenience wrapper
pci_nic_init_nofail(), which behaves just like pci_nic_init() used to
do.

Bonus bug fix: we now check for qdev_init() failing there.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Monitor command "pci_add ADDR storage ..." does its work in
qemu_pci_hot_add_nic().  It called pci_create(..., ADDR) to create the
device.  That's wrong, because pci_create() terminates the program
when ADDR is invalid.

Use pci_get_bus_devfn() and pci_create_noinit() instead.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Since cpu_register_phys_memory does not require size to be a multiple of
target page size, simply make msix page size 0x1000.  Do this in msix,
reverting part of 5e520a7d, as we no
longer have to pass target page around.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

refactor code slightly, adding symbolic constants and functions, and
using macros where possible.  This will also make following reset
patches easier.

No functional changes.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Create qdev infrastructure for pci hotplug.  PCI bus implementations
must register a handler for hotplug.  Creating a new PCI device will
automagically hot-plug it in case the PCI bus in question supports this.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

One more cleanup while being at it ;)
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

pci_unregister_device is static now and hooked into Devicestate->exit.
qdev_free(pci_device) works now.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If the user issues one of the following commands to the Monitor:

pci_add pci_addr=auto nic model=None
pci_add pci_addr=auto nic model=?

QEMU will exit, because the function used to perform sanity
checks (qemu_check_nic_model_list()) exits on error.

This function is used by the startup code, where it makes
sense to exit on error, but in the Monitor it doesn't.

Changing qemu_check_nic_model_list() to not exit on error
is not possible though, as it's used by the board init
code (the PC one), where all board specific code must have
void return.

The way I've chosen to fix this was to introduce a new function
called pci_nic_supported(), which checks if the NIC is supported
and returns true or false accordingly.

The new function is used only by the Monitor, it performs the
necessary check and returns an error in case the NIC is not
supported, thus qemu_check_nic_model_list()'s exit is never trigged.

The following should be observed:

1. Only the specified NIC is checked, the default one is assumed
to be supported

2. The NIC query command (model=?) won't work with pci_add, the
right way to do this with the Monitor is to add a new command
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In the very least, a change like this requires discussion on the list.

The naming convention is goofy and it causes a massive merge problem.  Something
like this _must_ be presented on the list first so people can provide input
and cope with it.

This reverts commit 99a0949b.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>