Untested, this board does not support PCI so it cannot run endianness-test.
It should fix endianness bugs in I/O port access.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-11-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This fixes endianness bugs in I/O port access.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-10-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This fixes endianness bugs in I/O port access.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-9-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This fixes endianness bugs in I/O port access.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-8-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This fixes endianness bugs in I/O port access.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-7-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Do not swap endianness here, it will happen during cpu_{in,out}{b,w,l}.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-6-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This fixes endianness bugs in I/O port access.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-5-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This fixes endianness bugs in I/O port access.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-4-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This fixes endianness bugs in I/O port access.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-3-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This fixes endianness bugs in I/O port access (for sh4eb).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-id: 1374501278-31549-2-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Suppress also the "... done" message from msgmerge.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* Tell xgettext that we use UTF-8 encoding (this is currently optional).

* Set charset=UTF-8 in messages.po. This avoids warnings from msgmerge:
  warning: Charset "CHARSET" is not a portable encoding name.

* Use filename relative to root directory (ui/gtk.c instead of ../ui/gtk.c
  or $(SRC_PATH)/ui/gtk.c) for comments in *.po files.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit f8475655 added a wildcard search
for *.po files. This search found no files for out of tree builds, so
those builds no longer created and installed *.mo files.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The help message contains single quotes which got lost in the output.
Fix also a typo and use two instead of three lines.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Michael R. Hines (8) and others
# Via Juan Quintela
* quintela/migration.next:
  migration: add autoconvergence documentation
  Fix real mode guest segments dpl value in savevm
  Fix real mode guest migration
  rdma: account for the time spent in MIG_STATE_SETUP through QMP
  rdma: introduce MIG_STATE_NONE and change MIG_STATE_SETUP state transition
  rdma: allow state transitions between other states besides ACTIVE
  rdma: send pc.ram
  rdma: core logic
  rdma: introduce ram_handle_compressed()
  rdma: bugfix: ram_control_save_page()
  rdma: update documentation to reflect new unpin support

Message-id: 1374590725-14144-1-git-send-email-quintela@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

QOM CPUState refactorings

* Fix NULL pointer dereference in gdbstub
* Introduce vaddr type
* Introduce CPUClass::set_pc()
* Introduce CPUClass::synchronize_from_tb()
* Introduce CPUClass::get_phys_page_debug()
* Introduce CPUClass::memory_rw_debug()
* Move singlestep_enabled and gdb_regs fields out of CPU_COMMON
* Adopt CPUState in more APIs
* Propagate CPUState in gdbstub

# gpg: Signature made Mon 22 Jul 2013 07:50:17 PM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Andreas Färber (21) and others
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony: (24 commits)
  linux-user: Use X86CPU property to retrieve CPUID family
  gdbstub: Change gdb_register_coprocessor() argument to CPUState
  cpu: Move gdb_regs field from CPU_COMMON to CPUState
  gdbstub: Change GDBState::{c,g}_cpu and find_cpu() to CPUState
  cpu: Introduce CPUClass::memory_rw_debug() for target_memory_rw_debug()
  exec: Change cpu_memory_rw_debug() argument to CPUState
  cpu: Turn cpu_get_phys_page_debug() into a CPUClass hook
  gdbstub: Change gdb_{read,write}_register() argument to CPUState
  gdbstub: Change gdb_handlesig() argument to CPUState
  gdbstub: Change syscall callback argument to CPUState
  kvm: Change kvm_{insert,remove}_breakpoint() argument to CPUState
  cpu: Change cpu_single_step() argument to CPUState
  gdbstub: Update gdb_handlesig() and gdb_signalled() Coding Style
  cpu: Move singlestep_enabled field from CPU_COMMON to CPUState
  target-alpha: Copy implver to DisasContext
  target-alpha: Copy singlestep_enabled to DisasContext
  cpu: Introduce CPUClass::synchronize_from_tb() for cpu_pc_from_tb()
  target-unicore32: Implement CPUClass::set_pc()
  target-moxie: Implement CPUClass::set_pc()
  target-m68k: Implement CPUClass::set_pc()
  ...

QOM device refactorings

* Avoid TYPE_* in VMStateDescription name
* Replace some DO_UPCAST()s and FROM_SYSBUS()s with QOM casts
* Limit legacy SCSI command line handling to non-hotplugged devices
* Replace some SysBusDeviceClass::init with DeviceClass::realize

# gpg: Signature made Mon 22 Jul 2013 06:31:42 PM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Hu Tao (26) and others
# Via Andreas Färber
* afaerber/tags/qom-devices-for-anthony: (55 commits)
  isa-bus: Drop isabus_bridge_init() since it does nothing
  ioapic: Use QOM realize for ioapic
  kvmvapic: Use QOM realize
  kvm/clock: Use QOM realize for kvmclock
  hpet: Use QOM realize for hpet
  scsi: Improve error propagation for scsi_bus_legacy_handle_cmdline()
  megasas: Legacy command line handling fix
  scsi/esp: Use QOM realize for scsi esp
  fw_cfg: Use QOM realize for fw_cfg
  ahci: Use QOM realize for ahci
  pflash_cfi02: Use QOM realize for pflash_cfi02
  pflash_cfi01: Use QOM realize for pflash_cfi01
  fdc: Improve error propagation for QOM realize
  fdc: Use QOM realize for fdc
  kvm/clock: QOM'ify some more
  hpet: QOM'ify some more
  scsi/esp: QOM'ify some more
  fwcfg: QOM'ify some more
  ahci: QOM'ify some more
  pflash-cfi02: QOM'ify some more
  ...

This hunk got lost during merge.  It is documentation.
Spotted-by: NPeter Lieven <lieven-lists@dlhnet.de>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Older KVM version put invalid value in the segments registers dpl field for
real mode guests (0x3).
This breaks migration from those hosts to hosts with unrestricted guest support.
We detect it by checking CS dpl value for real mode guest and fix the dpl values
of all the segment registers.
Signed-off-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Older KVM versions save CS dpl value to an invalid value for real mode guests
(0x3). This patch detect this situation when loading CPU state and set all the
segments dpl to zero.
This will allow migration from older KVM on host without unrestricted guest
to hosts with restricted guest support.
For example migration from a Penryn host (with kernel 2.6.32) to
a Westmere host (for real mode guest) will fail with "kvm: unhandled exit 80000021".
Signed-off-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Using the previous patches, we're now able to timestamp the SETUP
state. Once we have this time, let the user know about it in the
schema.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

As described in the previous patch, until now, the MIG_STATE_SETUP
state was not really a 'formal' state. It has been used as a 'zero' state
(what we're calling 'NONE' here) and QEMU has been unconditionally transitioning
into this state when the QMP migration command was called. Instead we want to
introduce MIG_STATE_NONE, which is our starting state in the state machine, and
then immediately transition into the MIG_STATE_SETUP state when the QMP migrate
command is issued.

In order to do this, we must delay the transition into MIG_STATE_ACTIVE until
later in the migration_thread(). This is done to be able to timestamp the amount of
time spent in the SETUP state for proper accounting to the user during
an RDMA migration.

Furthermore, the management software, until now, has never been aware of the
existence of the SETUP state whatsoever. This must change, because, timing of this
state implies that the state actually exists.

These two patches cannot be separated because the 'query_migrate' QMP
switch statement needs to know how to handle this new state transition.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This patch is in preparation for the next ones: Until now the MIG_STATE_SETUP
state was not really a 'formal' state. It has been used as a 'zero' state
and QEMU has been unconditionally transitioning into this state when
the QMP migrate command was called. In preparation for timing this state,
we have to make this state a a 'real' state which actually gets transitioned
from later in the migration_thread() from SETUP => ACTIVE, rather than just
automatically dropping into this state at the beginninig of the migration.

This means that the state transition function (migration_finish_set_state())
needs to be capable of transitioning from valid states _other_ than just
MIG_STATE_ACTIVE.

The function is in fact already capable of doing that, but was not allowing the
old state to be a parameter specified as an input.

This patch fixes that and only makes the transition if the current state
matches the old state that the caller intended to transition from.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This takes advantages of the previous patches:

1. use the new QEMUFileOps hook 'save_page'

2. call out to the right accessor methods to invoke
   the iteration hooks defined in QEMUFileOps
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Code that does need to be visible is kept
well contained inside this file and this is the only
new additional file to the entire patch.

This file includes the entire protocol and interfaces
required to perform RDMA migration.

Also, the configure and Makefile modifications to link
this file are included.

Full documentation is in docs/rdma.txt
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This gives RDMA shared access to madvise() on the destination side
when an entire chunk is found to be zero.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Tested-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

We were not checking for a valid 'bytes_sent' pointer before accessing it.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

As requested, the protocol now includes memory unpinning support.
This has been implemented in a non-optimized manner, in such a way
that one could devise an LRU or other workload-specific information
on top of the basic mechanism to influence the way unpinning happens
during runtime.

The feature is not yet user-facing, and is thus can only be enabled
at compile-time.
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Avoids duplicating the calculation.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NAndreas Färber <afaerber@suse.de>

Prepares for changing gdb_register_coprocessor() argument to CPUState.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Use CPUState::env_ptr where still needed.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Make inline target_memory_rw_debug() always available and change its
argument to CPUState. Let it check if CPUClass::memory_rw_debug provides
a specialized callback and fall back to cpu_memory_rw_debug() otherwise.

The only overriding implementation is for 32-bit sparc.

This prepares for changing GDBState::g_cpu to CPUState.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Propagate X86CPU in kvmvapic for simplicity.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Change breakpoint_invalidate() argument to CPUState alongside.

Since all targets now assign a softmmu-only field, we can drop helpers
cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd().

Prepares for changing cpu_memory_rw_debug() argument to CPUState.

Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Use CPUState::env_ptr for now.

Prepares for changing GDBState::g_cpu to CPUState.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Callback implementations were specific to arm and m68k, so can easily
cast to ARMCPU and M68kCPU respectively.

Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

CPUArchState is no longer directly used since converting CPU loops to
CPUState.

Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Use CPUState::env_ptr for now.

Needed for GdbState::c_cpu.
Signed-off-by: NAndreas Färber <afaerber@suse.de>