- 08 8月, 2011 2 次提交
-
-
由 Avi Kivity 提交于
Make use of the memory API's ability to satisfy multi-byte accesses via multiple single-byte accesses. We have to keep vga_mem_{read,write}b() since they're used by cirrus. Reviewed-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
Convert all vga memory to the memory API. Note we need to fall back to get_system_memory(), since the various buses don't pass the vga window as a memory region. We no longer need to sync the dirty bitmap of the cirrus mapped memory banks, since the memory API takes care of that for us. [jan: fix vga-pci logging] Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 24 7月, 2011 1 次提交
-
-
由 Richard Henderson 提交于
These addresses have been passed through pci_to_cpu_addr, and thus need to be full target_phys_addr_t. Acked-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NRichard Henderson <rth@twiddle.net> Cc: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 20 2月, 2011 1 次提交
-
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 09 12月, 2010 1 次提交
-
-
由 Gerd Hoffmann 提交于
qxl is a paravirtual graphics card. The qxl device is the bridge between the guest and the spice server (aka libspice-server). The spice server will send the rendering commands to the spice client, which will actually render them. The spice server is also able to render locally, which is done in case the guest wants read something from video memory. Local rendering is also used to support display over vnc and sdl. qxl is activated using "-vga qxl". qxl supports multihead, additional cards can be added via '-device qxl". [ v2: add copyright to files ] [ v2: use qemu-common.h for standard includes ] [ v2: create separate qxl-vga device for primary ] Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 16 11月, 2010 1 次提交
-
-
由 Gerd Hoffmann 提交于
video.x is gone now. It was the only user of the vga bios_offset + bios_size logic. Zap it. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 08 4月, 2010 1 次提交
-
-
由 Gerd Hoffmann 提交于
The bochs vbe interface got a new register a while back, which specifies the linear framebuffer size in 64k units. This patch adds support for the new register to qemu. With this patch applied vgabios 0.6c works with qemu. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 19 12月, 2009 2 次提交
-
-
由 Anthony Liguori 提交于
This patch enables dirty log tracking whenever it's needed and disables it when it is not. We unconditionally enable dirty log tracking on reset, restart dirty log tracking when PCI IO regions are remapped, and disable/enable it based on commands from the guest. Rebased-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Apparently, VBE maps the VGA vram to a fixed physical location. KVM requires that all mappings of the VGA vram have dirty tracking enabled on them. Any access to the VGA vram through the VBE mapping currently fails to result in dirty page tracking updates causing a black screen. This is the true root cause of VMware VGA not working correctly under KVM and likely also an issue with some of the std-vga black screen issues too. Cirrus does not enable VBE so it would not be a problem when using Cirrus. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Rebased-by: NDave Airlie <airlied@redhat.com>
-
- 28 11月, 2009 1 次提交
-
-
由 Aurelien Jarno 提交于
This causes ctrl+alt+u or ctrl+alt+f to not work when windows hasn't been resized first. Other graphic emulators do resize the screen on hw_invalidate. This reverts commit 0bd8246b.
-
- 30 10月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 10月, 2009 3 次提交
-
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 02 10月, 2009 2 次提交
-
-
由 Anthony Liguori 提交于
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 malc 提交于
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 10 9月, 2009 5 次提交
-
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
It is only used in mips softmmu, compile only there. it_shift field was only used for vga_isa_mm, move it from VGACommonState to ISAVGAMMstate. Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Once there adjust VGAState <-> VGACommonState Export vga_common_save/vga_common_load (nreeded by wmvare_vga Remove vga.pci_dev field, it is not needed anymore Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 8月, 2009 2 次提交
-
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 11 8月, 2009 2 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-Id:
-
由 Stefano Stabellini 提交于
Hi all, currently vga always resizes the screen when vga_hw_invalidate is called while this is not required and all the other graphic emulators don't. This patch fixes it, making vga invalidate behaviour consistent with the other emulated devices. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-Id:
-
- 14 5月, 2009 1 次提交
-
-
由 Paul Brook 提交于
The vga_ram_size argument to machine init functions always has the same value, and is ignored by many machines (including SPARC32 which has an obsolete ifdef for VGA_RAM_SIZE). Remove it and push VGA_RAM_SIZE into vga_int.h. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
- 09 5月, 2009 1 次提交
-
-
由 Avi Kivity 提交于
All VGA devices share a common field subset; currently they do so by a macro which defines the common fields inline their state structures, relying on the the common state being placed at offset 0 in the structure. This makes refactoring the code difficult and requires a lot of error prone casts. Replace the macro by a new VGACommonState structure, and the casts by regular field access and container_of() for upcasts. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 17 4月, 2009 1 次提交
-
-
由 aliguori 提交于
In theory, there are no more quirks in the KVM slot management that requires dirty log start/stop all over the place. We just have to start the logging each time the mapping may have changed. This patch drops vga_dirty_log_stop for both standard and cirrus VGA. It also reverts #6851 as it was obviously a tribute to the old slot system. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7141 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 10 4月, 2009 1 次提交
-
-
由 pbrook 提交于
Signed-off-by: NPaul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7063 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 08 4月, 2009 1 次提交
-
-
由 aliguori 提交于
There is a much more elegant fix that will follow up after this commit. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7025 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 06 4月, 2009 1 次提交
-
-
由 aliguori 提交于
When the vga resolution changes, a new display surface is not allocated immediately; instead that is deferred until the next update. However, if we're running without a display client attached, that won't happen and the next bitblt is likely to cause a segfault by overflowing the display surface. Fix by reallocating the display immediately when the resolution changes. Tested with (Windows|Linux) x (cirrus|std) x (curses|sdl). Changes from v1: - fix segfault when switching virtual consoles with curses Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6989 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 17 1月, 2009 2 次提交
-
-
由 aliguori 提交于
this patch fixes the screendump functionality that was recently broken; it must be applied *after* PATCH 5, 6 and 7 of the original displaystate change patch series. In fact the other patches make much easier to solve the screendump problem because they make the console switching mechanism more robust. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6345 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Patch 5/7 This patch changes the graphical_console_init function to return an allocated DisplayState instead of a QEMUConsole. This patch contains just the graphical_console_init change and few other modifications mainly in console.c and vl.c. It was necessary to move the display frontends (e.g. sdl and vnc) initialization after machine->init in vl.c. This patch does *not* include any required changes to any device, these changes come with the following patches. Patch 6/7 This patch changes the QEMUMachine init functions not to take a DisplayState as an argument because is not needed any more; In few places the graphic hardware initialization function was called only if DisplayState was not NULL, now they are always called. Apart from these cases, the rest are all mechanical substitutions. Patch 7/7 This patch updates the graphic device code to use the new graphical_console_init function. As for the previous patch, in few places graphical_console_init was called only if DisplayState was not NULL, now it is always called. Apart from these cases, the rest are all mechanical substitutions. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6344 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 16 1月, 2009 1 次提交
-
-
由 aliguori 提交于
This patch changes the DisplayState interface adding support for multiple frontends at the same time (sdl and vnc) and implements most of the benefit of the shared_buf patch without the added complexity. Currently DisplayState is managed by sdl (or vnc) and sdl (or vnc) is also responsible for allocating the data and setting the depth. Vga.c (or another backend) will do any necessary conversion. The idea is to change it so that is vga.c (or another backend) together with console.c that fully manage the DisplayState interface allocating data and setting the depth (either 16 or 32 bit, if the guest uses a different resolution or is in text mode, vga.c (or another backend) is in charge of doing the conversion seamlessly). The other idea is that DisplayState supports *multiple* frontends like sdl and vnc; each of them can register some callbacks to be called when a display event occurs. The interesting changes are: - the new structures and related functions in console.h and console.c in particular the following functions are very helpful to manage a DisplaySurface: qemu_create_displaysurface qemu_resize_displaysurface qemu_create_displaysurface_from qemu_free_displaysurface - console_select and qemu_console_resize in console.c this two functions manage multiple consoles on a single host display - moving code around in hw/vga.c as for the shared_buf patch this is necessary to be able to handle a dynamic DisplaySurface bpp - changes to vga_draw_graphic in hw/vga.c this is the place where the DisplaySurface buffer is shared with the videoram, when possible; Compared to the last version the only changes are: - do not remove support to dpy_copy in cirrus_vga - change the name of the displaysurface handling functions Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6336 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 06 1月, 2009 1 次提交
-
-
由 blueswir1 提交于
The vga reset handler overwrites some cirrus registers, causing reboots to corrupt cirrus state to the point that guests can only bring up 640x480 resolutions. Fix by adding a dedicated cirrus reset handler (which calls the common vga handler). Signed-off-by: NAvi Kivity <avi@redhat.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6191 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 02 12月, 2008 1 次提交
-
-
由 pbrook 提交于
Signed-off-by: NPaul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5849 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 25 11月, 2008 3 次提交
-
-
由 aliguori 提交于
Hypervisors like KVM perform badly while doing mmio on a loop, because it'll generate an exit on each access. This is the case with VGA, which results in very bad performance. In this patch, we map the linear frame buffer as RAM, make sure it has dirty region tracking enabled, and then just let the region to be written. Cleanups suggestions by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NGlauber Costa <glommer@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5793 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
It'll be reused later by the vga optimization. Signed-off-by: NGlauber Costa <glommer@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5791 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
unsigned long is too bad of a type. Use ram_addr_t instead. aligurori: fixed a compile warning in this patch Signed-off-by: NGlauber Costa <glommer@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5790 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 28 9月, 2008 1 次提交
-
-
由 malc 提交于
Selected via: -vga <name>,retrace=precise git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5336 c046a42c-6fe2-441c-8c8c-71466251a162
-