Detect presence of IASL compiler and use it
to process ASL source. If not there, use pre-compiled
files in-tree. Add script to update the in-tree files.

Note: distros are known to silently update iasl
so detect correct iasl flags for the installed version on each run as
opposed to at configure time.
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This adds ASL code as well as scripts for processing it,
imported from seabios git tree
commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd

Will be used for runtime acpi table generation.

Note:
This patch reuses some code from SeaBIOS, which was originally under
LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This
relicensing has been acked by all contributors that had contributed to the
code since the v2->v3 relicense. ACKs approving the v2+ relicensing are
listed below. The list might include ACKs from people not holding
copyright on any parts of the reused code, but it's better to err on the
side of caution and include them.

Affected SeaBIOS files (GPLv2+ license headers added)
<http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>:

 src/acpi-dsdt-cpu-hotplug.dsl
 src/acpi-dsdt-dbug.dsl
 src/acpi-dsdt-hpet.dsl
 src/acpi-dsdt-isa.dsl
 src/acpi-dsdt-pci-crs.dsl
 src/acpi.c
 src/acpi.h
 src/ssdt-misc.dsl
 src/ssdt-pcihp.dsl
 src/ssdt-proc.dsl
 tools/acpi_extract.py
 tools/acpi_extract_preprocess.py

Each one of the listed people agreed to the following:

> If you allow the use of your contribution in QEMU under the
> terms of GPLv2 or later as proposed by this patch,
> please respond to this mail including the line:
>
> Acked-by: Name <email address>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Acked-by: NJan Kiszka <jan.kiszka@siemens.com>
Acked-by: NJason Baron <jbaron@akamai.com>
Acked-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Acked-by: NGleb Natapov <gleb@redhat.com>
Acked-by: NMarcelo Tosatti <mtosatti@redhat.com>
Acked-by: NDave Frodin <dave.frodin@se-eng.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NKevin O'Connor <kevin@koconnor.net>
Acked-by: NLaszlo Ersek <lersek@redhat.com>
Acked-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NMagnus Christensson <magnus.christensson@intel.com>
Acked-by: NHu Tao <hutao@cn.fujitsu.com>
Acked-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NHu Tao <hutao@cn.fujitsu.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Address is already exposed, expose size for symmetry.
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Useful to make it accessible through QOM.
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Callers pass in the address so it's helpful for
them to be able to decode it.
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Make it possible to test unmapped status through QMP.
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Support ROM blobs not mapped into guest memory:
same as ROM files really but use caller's buffer.

Support invoking callback on access and
return memory pointer making it easier
for caller to update memory if necessary.
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

BAR base was calculated incorrectly.
Use existing pci_bar_address to get it right.
Tested-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Make it easy to add read-only helpers for simple
integer properties in memory.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

now that a typedef for struct Error is available,
use it in qom/object.h to match coding style rules.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

qapi/error.h is simple enough to be included in qom/object.h
direcly and prepares qom/object.h to use Error typedef.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Instead of exposing the the irq field,
pci wrappers to qemu_set_irq or qemu_irq_*
can be used.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The fields hpev_intx and aer_intx were removed because
both AER and hot-plug events must use device's interrupt.
Assert/deassert interrupts using pci irq wrappers instead.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

pci_set_irq and the other pci irq wrappers use
PCI_INTERRUPT_PIN config register to compute device
INTx pin to assert/deassert.

An irq is allocated using pci_allocate_irq wrapper
only if is needed by non pci devices.

Removed irq related fields from state if not used anymore.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

pci_set_irq and the other pci irq wrappers use
PCI_INTERRUPT_PIN config register to compute device
INTx pin to assert/deassert.

save INTX pin into the config register before calling
pci_set_irq
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

pci_set_irq uses PCI_INTERRUPT_PIN config register
to compute device INTx pin to assert/deassert.

An assert is used to ensure that intx received
from the quest OS corresponds to PCI_INTERRUPT_PIN.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The PCI_INTERRUPT_PIN will be used by shpc init, so
was moved before the call to shpc_init.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Interrupt pin is selected and saved into PCI_INTERRUPT_PIN
register during device initialization. Devices should not call
directly qemu_set_irq and specify the INTx pin on each call.

Added pci_* wrappers to replace qemu_set_irq, qemu_irq_raise,
qemu_irq_lower and qemu_irq_pulse, setting the irq
based on PCI_INTERRUPT_PIN.

Added pci_allocate_irq wrapper to be used by devices that
still need PCIDevice infrastructure to assert irqs.

Renamed a static method which was named already pci_set_irq.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

qemu_allocate_irq returns a single qemu_irq.
The interface allows to specify an interrupt number.

qemu_free_irq frees it.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

A MemoryRegion with negative priority was created and
it spans over all the pci address space.
It "intercepts" the accesses to unassigned pci
address space and will follow the pci spec:
 1. returns -1 on read
 2. does nothing on write

Note: setting the RECEIVED MASTER ABORT bit in the STATUS register
      of the device that initiated the transaction will be
      implemented in another series
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

When memory regions overlap, priority can be used to specify
which of them takes priority. By making the priority values signed
rather than unsigned, we make it more convenient to implement
a situation where one "background" region should appear only
where no other region exists: rather than having to explicitly
specify a high priority for all the other regions, we can let them take
the default (zero) priority and specify a negative priority for the
background region.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

When memory regions overlap, priority can be used to specify
which of them takes priority. By making the priority values signed
rather than unsigned, we make it more convenient to implement
a situation where one "background" region should appear only
where no other region exists: rather than having to explicitly
specify a high priority for all the other regions, we can let them take
the default (zero) priority and specify a negative priority for the
background region.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Currently, -smbios type=T,NAME=VAL,... adds one field (T,NAME) with
value VAL to fw_cfg for each unique NAME.  If NAME occurs multiple
times, the last one's VAL is used (before the QemuOpts conversion, the
first one was used).

Multiple -smbios can add multiple fields with the same (T, NAME).
SeaBIOS reads all of them from fw_cfg, but uses only the first field
(T, NAME).  The others are ignored.

"First one wins, subsequent ones get ignored silently" isn't nice.  We
commonly let the last option win.  Useful, because it lets you
-readconfig first, then selectively override with command line
options.

Clean up -smbios to work the common way.  Accumulate the settings,
with later ones overwriting earlier ones.  Put the result into fw_cfg
(no more useless duplicates).

Bonus cleanup: qemu_uuid_parse() no longer sets SMBIOS system uuid by
side effect.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

We allow either tables or fields for the same type.  Makes sense,
because SeaBIOS uses fields only when no tables are present.

We do this by searching the SMBIOS blob for a previously added table
or field.  Error messages look like this:

    qemu-system-x86_64: -smbios type=1,serial=42: SMBIOS type 1 table already defined, cannot add field

User needs to know that "table" is defined by -smbios file=..., and
"field" by -smbios type=...

Instead of searching the blob, record additions of interest, and check
that.  Simpler, and makes better error messages possible:

    qemu-system-x86_64: -smbios file=smbios_type_1.bin: Can't mix file= and type= for same type
    qemu-system-x86_64: -smbios type=1,serial=42,serial=99: This is the conflicting setting
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

So that it can be set in config file for -readconfig.

This tightens parsing of -smbios, and makes it more consistent with
other options: unknown parameters are rejected, numbers with trailing
junk are rejected, when a parameter is given multiple times, last
rather than first wins, ...

MST: drop one chunk to fix build errors
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

It exits on all error conditions but one, where it returns -1.
Normalize, and return void.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

When mac is updated on reset, info string has stale data.
Fix it up.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This check is useless, as bigger addresses will be ignored when
added to 'io' MemoryRegion, which has a size of 64K.

However, some architectures don't use the 'io' MemoryRegion, like
the alpha and versatile platforms. They create a PCI I/O region
bigger than 64K, so let them handle PCI I/O BARs in the higher range.

MST: reinstated work-around for BAR sizing.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

io base register at 0x40 is cleared on reset,
but io is not disabled until some other event
happens to call pm_io_space_update.

Invoke pm_io_space_update directly to make this
consistent.

Cc: qemu-stable@nongnu.org
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Detect the 64 bit window programmed by firmware
and configure properties accordingly.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Detect the 64 bit window programmed by firmware
and configure properties accordingly.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

will help simplify header dependencies.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

For Q35, MMCFG address and size are guest configurable.
Update w32 property to make it behave accordingly.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

ARM queue:
 * aarch64 preparation patchset (excluding the defconfigs, so this
   doesn't actually enable the new targets yet)
 * minor bugfixes and cleanups
 * disable "-cpu any" in system emulation mode
 * fix ARMv7M stack alignment on reset

# gpg: Signature made Tue 10 Sep 2013 01:46:11 PM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found

# By Alexander Graf (13) and others
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20130910: (28 commits)
  configure: Add handling code for AArch64 targets
  linux-user: Add AArch64 support
  linux-user: Allow targets to specify a minimum uname release
  linux-user: Add AArch64 termbits.h definitions
  linux-user: Implement cpu_set_tls() and cpu_clone_regs() for AArch64
  linux-user: Make sure NWFPE code is 32 bit ARM only
  linux-user: Add signal handling for AArch64
  linux-user: Fix up AArch64 syscall handlers
  linux-user: Add syscall number definitions for AArch64
  linux-user: Add cpu loop for AArch64
  linux-user: Don't treat AArch64 cpu names specially
  target-arm: Add AArch64 gdbstub support
  target-arm: Add AArch64 translation stub
  target-arm: Prepare translation for AArch64 code
  target-arm: Disable 32 bit CPUs in 64 bit linux-user builds
  target-arm: Add new AArch64CPUInfo base class and subclasses
  target-arm: Pass DisasContext* to gen_set_pc_im()
  target-arm: Fix target_ulong/uint32_t confusions
  target-arm: Export cpu_env
  target-arm: Extract the disas struct to a header file
  ...

Message-id: 1378839142-7726-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: NAnthony Liguori <anthony@codemonkey.ws>

# By Cole Robinson
# Via Luiz Capitulino
* luiz/queue/qmp:
  qapi-types.py: Fix enum struct sizes on i686

Message-id: 1378822364-13887-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: NAnthony Liguori <anthony@codemonkey.ws>

# By Gerd Hoffmann (2) and Christophe Fergeau (1)
# Via Gerd Hoffmann
* spice/spice.v73:
  qxl: fix local renderer
  qxl: trace io port name
  spice-core: Use g_strdup_printf instead of snprintf

Message-id: 1378807572-27902-1-git-send-email-kraxel@redhat.com
Signed-off-by: NAnthony Liguori <anthony@codemonkey.ws>