Best to use the same type, to avoid unwanted truncation or sign
extension.

BlockConf can't use plain int for cyls, heads and secs, because
integer properties require an exact width.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The PCI version is supported in lots of Operating Systems,
and has been successfully tested on:
- MS DOS 6.22 (using DC390 driver)
- MS Windows 3.11 (using DC390 driver)
- MS Windows 98 SE (using default driver)
- MS Windows NT 3.1 (using DC390 driver)
- MS Windows NT 4.0 (using default driver)
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Also reorganize and comment the irq functions while being at it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

$subject says all.  First cut.

It's a pure UAS (usb attached scsi) emulation, without BOT (bulk-only
transport) compatibility.  If your guest can't handle it use usb-storage
instead.

The emulation works like any other scsi hba emulation (eps, lsi, virtio,
megasas, ...).  It provides just the HBA where you can attach scsi
devices as you like using '-device'.  A single scsi target with up to
256 luns is supported.

For now only usb 2.0 transport is supported.  This will change in the
future though as I plan to use this as playground when codeing up &
testing usb 3.0 transport and streams support in the qemu usb core and
the xhci emulation.

No migration support yet.  I'm planning to add usb 3.0 support first as
this probably requires saving additional state.

Special thanks go to Paolo for bringing the qemu scsi emulation into
shape, so this can be added nicely without having to touch a single line
of scsi code.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Replace iso transfer fprintf's with trace points.  Also rename existing
tracepoints so they all match usb_host_iso_*.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch adds an emulation for the LSI Megaraid SAS 8708EM2 HBA.
I've tested it to work with Linux, Windows Vista, and Windows7.
Signed-off-by: NHannes Reinecke <hare@suse.de>
[ Squashed trivial changes from Andreas Faerber, rebased over IOMMU
  and QBus changes - Paolo ]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This allows to know how long each section takes to save.

An awk script like this tells us sections that takes more that 10ms

$1 ~ /savevm_state_iterate_end/ {
	/* Print savevm_section_end line when > 10ms duration */
	if ($2 > 10000) {
		printf("%s times_missing=%u\n", $0, times_missing++);
	}
}
Signed-off-by: NJuan Quintela <quintela@redhat.com>

fix ws tracepoints
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Allow certain event types to be rate limited to avoid flooding
monitor clients. The monitor_protocol_event() method is changed
such that instead of immediately emitting the event to Monitor
instances, it will call a new monitor_protocol_event_queue()
method.

This will check to see if the rate limit for the event has been
exceeded, and if so schedule a timer to wakeup at the end of the
rate limit period. If further events arrive before the timer fires,
the previously queued event will be discarded in favour of the new
event. The event will eventually be emitted when the timer fires.

This logic is applied to RTC_CHANGE, BALLOON_CHANGE & WATCHDOG
events, since the data associated with these events is stateless

 * monitor.c: Add support for rate limiting
 * monitor.h: Define monitor_global_init for one-time setup tasks
 * vl.c: Invoke monitor_global_init
 * trace-events: Add hooks for monitor event tracing
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Add a separate EHCIPacket struct and move fields over from EHCIQueue.
Preparing for supporting multiple packets per queue being in flight at
the same time.  No functional changes yet.

Fix some codestyle issues along the way.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

uhci_process_frame() can be invoked multiple times per frame, so
accounting usb bandwith in a local variable doesn't fly, use a variable
in UHCIState instead.  Also check the limit more frequently.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This allows using LUNs bigger than 2TB.  Keep using READ10 for other
device types such as MMC.
Signed-off-by: NRonnie Sahlberg <ronniesahlberg@gmail.com>

The resulting stp file fails to load because of an unresolvable probe.
Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch carries a complete rewrite of the usb descriptor parser.
Changes / improvements:

 * We are using the USBDescriptor struct instead of hard-coded offsets
   now to access descriptor data.
 * (debug) printfs are all gone, tracepoints have been added instead.
 * We don't try (and fail) to skip over unneeded descriptors.  We parse
   them all one by one.  We keep track of which configuration, interface
   and altsetting we are looking at and use this information to figure
   which desciptors are in use and which we can ignore.
 * On parse errors we clear all endpoint information, which will
   disallow any communication with the device, except control endpoint
   messages.  This makes sure we don't end up with a silly device state
   where half of the endpoints got enabled and the other half was left
   disabled.
 * Some sanity checks have been added.

The new parser is more robust and also leaves complete device
information in the trace log if you enable the ush_host_parse_*
tracepoints.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add tracepoints to the usb hub emulation.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add pointer to USBPacket to all tracepoints tracking requests to make it
easier to identify them when multiple requests are in flight.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add tracepoints to track canceled requests.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add tracepoint to track completion of emulated control requests.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

'next' is a systemtap keyword, so it's a bad idea to use it as an
argument name.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

mem is an uint64_t value, so %lx was wrong.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NAlon Levy <alevy@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

dprint is still used for qxl_init_common one time prints.

also switched parts of spice-display.c over, mainly all the callbacks to
spice server.

All qxl device trace events start with the qxl device id.
Signed-off-by: NAlon Levy <alevy@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Zap DPRINTF, add tracepoints instead.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a new function to check whenever the packet state is as expected,
log more informations in case it isn't.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Reorganize usb source files.  Create a new hw/usb/ directory and move
all usb source code to that place.  Also make filenames a bit more
descriptive.  Host adapters are prefixed with "hch-" now, usb device
emulations are prefixed with "dev-".  Fixup paths Makefile and include
paths to make it compile.  No code changes.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

If the first part of a write request is allocated, but the second isn't
and it can be allocated so that the resulting area is contiguous, handle
it at once. This is a common case for sequential writes.

After this patch, alloc_cluster_offset() only checks if the clusters are
already allocated or how many new clusters can be allocated contigouosly.
The actual cluster allocation is split off into a new function
do_alloc_cluster_offset().
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>