esp: add AMD PCscsi emulation (PCI SCSI adapter)

The PCI version is supported in lots of Operating Systems,
and has been successfully tested on:
- MS DOS 6.22 (using DC390 driver)
- MS Windows 3.11 (using DC390 driver)
- MS Windows 98 SE (using default driver)
- MS Windows NT 3.1 (using DC390 driver)
- MS Windows NT 4.0 (using default driver)
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

default-configs/i386-softmmu.mak

@@ -25,3 +25,4 @@ CONFIG_HPET=y
 CONFIG_APPLESMC=y
 CONFIG_I8259=y
 CONFIG_PFLASH_CFI01=y
+CONFIG_ESP=y

hw/esp.c

@@ -2,6 +2,7 @@
  * QEMU ESP/NCR53C9x emulation
  *
  * Copyright (c) 2005-2006 Fabrice Bellard
+ * Copyright (c) 2012 Herve Poussineau
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy
  * of this software and associated documentation files (the "Software"), to deal
@@ -23,6 +24,7 @@
  */
 
 #include "sysbus.h"
+#include "pci.h"
 #include "scsi.h"
 #include "esp.h"
 #include "trace.h"
@@ -142,6 +144,7 @@ struct ESPState {
 #define CFG1_RESREPT 0x40
 
 #define TCHI_FAS100A 0x4
+#define TCHI_AM53C974 0x12
 
 static void esp_raise_irq(ESPState *s)
 {
@@ -820,9 +823,372 @@ static TypeInfo sysbus_esp_info = {
     .class_init    = sysbus_esp_class_init,
 };
 
+#define DMA_CMD   0x0
+#define DMA_STC   0x1
+#define DMA_SPA   0x2
+#define DMA_WBC   0x3
+#define DMA_WAC   0x4
+#define DMA_STAT  0x5
+#define DMA_SMDLA 0x6
+#define DMA_WMAC  0x7
+
+#define DMA_CMD_MASK   0x03
+#define DMA_CMD_DIAG   0x04
+#define DMA_CMD_MDL    0x10
+#define DMA_CMD_INTE_P 0x20
+#define DMA_CMD_INTE_D 0x40
+#define DMA_CMD_DIR    0x80
+
+#define DMA_STAT_PWDN    0x01
+#define DMA_STAT_ERROR   0x02
+#define DMA_STAT_ABORT   0x04
+#define DMA_STAT_DONE    0x08
+#define DMA_STAT_SCSIINT 0x10
+#define DMA_STAT_BCMBLT  0x20
+
+#define SBAC_STATUS 0x1000
+
+typedef struct PCIESPState {
+    PCIDevice dev;
+    MemoryRegion io;
+    uint32_t dma_regs[8];
+    uint32_t sbac;
+    ESPState esp;
+} PCIESPState;
+
+static void esp_pci_handle_idle(PCIESPState *pci, uint32_t val)
+{
+    trace_esp_pci_dma_idle(val);
+    esp_dma_enable(&pci->esp, 0, 0);
+}
+
+static void esp_pci_handle_blast(PCIESPState *pci, uint32_t val)
+{
+    trace_esp_pci_dma_blast(val);
+    qemu_log_mask(LOG_UNIMP, "am53c974: cmd BLAST not implemented\n");
+}
+
+static void esp_pci_handle_abort(PCIESPState *pci, uint32_t val)
+{
+    trace_esp_pci_dma_abort(val);
+    if (pci->esp.current_req) {
+        scsi_req_cancel(pci->esp.current_req);
+    }
+}
+
+static void esp_pci_handle_start(PCIESPState *pci, uint32_t val)
+{
+    trace_esp_pci_dma_start(val);
+
+    pci->dma_regs[DMA_WBC] = pci->dma_regs[DMA_STC];
+    pci->dma_regs[DMA_WAC] = pci->dma_regs[DMA_SPA];
+    pci->dma_regs[DMA_WMAC] = pci->dma_regs[DMA_SMDLA];
+
+    pci->dma_regs[DMA_STAT] &= ~(DMA_STAT_BCMBLT | DMA_STAT_SCSIINT
+                               | DMA_STAT_DONE | DMA_STAT_ABORT
+                               | DMA_STAT_ERROR | DMA_STAT_PWDN);
+
+    esp_dma_enable(&pci->esp, 0, 1);
+}
+
+static void esp_pci_dma_write(PCIESPState *pci, uint32_t saddr, uint32_t val)
+{
+    trace_esp_pci_dma_write(saddr, pci->dma_regs[saddr], val);
+    switch (saddr) {
+    case DMA_CMD:
+        pci->dma_regs[saddr] = val;
+        switch (val & DMA_CMD_MASK) {
+        case 0x0: /* IDLE */
+            esp_pci_handle_idle(pci, val);
+            break;
+        case 0x1: /* BLAST */
+            esp_pci_handle_blast(pci, val);
+            break;
+        case 0x2: /* ABORT */
+            esp_pci_handle_abort(pci, val);
+            break;
+        case 0x3: /* START */
+            esp_pci_handle_start(pci, val);
+            break;
+        default: /* can't happen */
+            abort();
+        }
+        break;
+    case DMA_STC:
+    case DMA_SPA:
+    case DMA_SMDLA:
+        pci->dma_regs[saddr] = val;
+        break;
+    case DMA_STAT:
+        if (!(pci->sbac & SBAC_STATUS)) {
+            /* clear some bits on write */
+            uint32_t mask = DMA_STAT_ERROR | DMA_STAT_ABORT | DMA_STAT_DONE;
+            pci->dma_regs[DMA_STAT] &= ~(val & mask);
+        }
+        break;
+    default:
+        trace_esp_pci_error_invalid_write_dma(val, saddr);
+        return;
+    }
+}
+
+static uint32_t esp_pci_dma_read(PCIESPState *pci, uint32_t saddr)
+{
+    uint32_t val;
+
+    val = pci->dma_regs[saddr];
+    if (saddr == DMA_STAT) {
+        if (pci->esp.rregs[ESP_RSTAT] & STAT_INT) {
+            val |= DMA_STAT_SCSIINT;
+        }
+        if (pci->sbac & SBAC_STATUS) {
+            pci->dma_regs[DMA_STAT] &= ~(DMA_STAT_ERROR | DMA_STAT_ABORT |
+                                         DMA_STAT_DONE);
+        }
+    }
+
+    trace_esp_pci_dma_read(saddr, val);
+    return val;
+}
+
+static void esp_pci_io_write(void *opaque, target_phys_addr_t addr,
+                             uint64_t val, unsigned int size)
+{
+    PCIESPState *pci = opaque;
+
+    if (size < 4 || addr & 3) {
+        /* need to upgrade request: we only support 4-bytes accesses */
+        uint32_t current = 0, mask;
+        int shift;
+
+        if (addr < 0x40) {
+            current = pci->esp.wregs[addr >> 2];
+        } else if (addr < 0x60) {
+            current = pci->dma_regs[(addr - 0x40) >> 2];
+        } else if (addr < 0x74) {
+            current = pci->sbac;
+        }
+
+        shift = (4 - size) * 8;
+        mask = (~(uint32_t)0 << shift) >> shift;
+
+        shift = ((4 - (addr & 3)) & 3) * 8;
+        val <<= shift;
+        val |= current & ~(mask << shift);
+        addr &= ~3;
+        size = 4;
+    }
+
+    if (addr < 0x40) {
+        /* SCSI core reg */
+        esp_reg_write(&pci->esp, addr >> 2, val);
+    } else if (addr < 0x60) {
+        /* PCI DMA CCB */
+        esp_pci_dma_write(pci, (addr - 0x40) >> 2, val);
+    } else if (addr == 0x70) {
+        /* DMA SCSI Bus and control */
+        trace_esp_pci_sbac_write(pci->sbac, val);
+        pci->sbac = val;
+    } else {
+        trace_esp_pci_error_invalid_write((int)addr);
+    }
+}
+
+static uint64_t esp_pci_io_read(void *opaque, target_phys_addr_t addr,
+                                unsigned int size)
+{
+    PCIESPState *pci = opaque;
+    uint32_t ret;
+
+    if (addr < 0x40) {
+        /* SCSI core reg */
+        ret = esp_reg_read(&pci->esp, addr >> 2);
+    } else if (addr < 0x60) {
+        /* PCI DMA CCB */
+        ret = esp_pci_dma_read(pci, (addr - 0x40) >> 2);
+    } else if (addr == 0x70) {
+        /* DMA SCSI Bus and control */
+        trace_esp_pci_sbac_read(pci->sbac);
+        ret = pci->sbac;
+    } else {
+        /* Invalid region */
+        trace_esp_pci_error_invalid_read((int)addr);
+        ret = 0;
+    }
+
+    /* give only requested data */
+    ret >>= (addr & 3) * 8;
+    ret &= ~(~(uint64_t)0 << (8 * size));
+
+    return ret;
+}
+
+static void esp_pci_dma_memory_rw(PCIESPState *pci, uint8_t *buf, int len,
+                                  DMADirection dir)
+{
+    dma_addr_t addr;
+    DMADirection expected_dir;
+
+    if (pci->dma_regs[DMA_CMD] & DMA_CMD_DIR) {
+        expected_dir = DMA_DIRECTION_FROM_DEVICE;
+    } else {
+        expected_dir = DMA_DIRECTION_TO_DEVICE;
+    }
+
+    if (dir != expected_dir) {
+        trace_esp_pci_error_invalid_dma_direction();
+        return;
+    }
+
+    if (pci->dma_regs[DMA_STAT] & DMA_CMD_MDL) {
+        qemu_log_mask(LOG_UNIMP, "am53c974: MDL transfer not implemented\n");
+    }
+
+    addr = pci->dma_regs[DMA_SPA];
+    if (pci->dma_regs[DMA_WBC] < len) {
+        len = pci->dma_regs[DMA_WBC];
+    }
+
+    pci_dma_rw(&pci->dev, addr, buf, len, dir);
+
+    /* update status registers */
+    pci->dma_regs[DMA_WBC] -= len;
+    pci->dma_regs[DMA_WAC] += len;
+}
+
+static void esp_pci_dma_memory_read(void *opaque, uint8_t *buf, int len)
+{
+    PCIESPState *pci = opaque;
+    esp_pci_dma_memory_rw(pci, buf, len, DMA_DIRECTION_TO_DEVICE);
+}
+
+static void esp_pci_dma_memory_write(void *opaque, uint8_t *buf, int len)
+{
+    PCIESPState *pci = opaque;
+    esp_pci_dma_memory_rw(pci, buf, len, DMA_DIRECTION_FROM_DEVICE);
+}
+
+static const MemoryRegionOps esp_pci_io_ops = {
+    .read = esp_pci_io_read,
+    .write = esp_pci_io_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .impl = {
+        .min_access_size = 1,
+        .max_access_size = 4,
+    },
+};
+
+static void esp_pci_hard_reset(DeviceState *dev)
+{
+    PCIESPState *pci = DO_UPCAST(PCIESPState, dev.qdev, dev);
+    esp_hard_reset(&pci->esp);
+    pci->dma_regs[DMA_CMD] &= ~(DMA_CMD_DIR | DMA_CMD_INTE_D | DMA_CMD_INTE_P
+                              | DMA_CMD_MDL | DMA_CMD_DIAG | DMA_CMD_MASK);
+    pci->dma_regs[DMA_WBC] &= ~0xffff;
+    pci->dma_regs[DMA_WAC] = 0xffffffff;
+    pci->dma_regs[DMA_STAT] &= ~(DMA_STAT_BCMBLT | DMA_STAT_SCSIINT
+                               | DMA_STAT_DONE | DMA_STAT_ABORT
+                               | DMA_STAT_ERROR);
+    pci->dma_regs[DMA_WMAC] = 0xfffffffd;
+}
+
+static const VMStateDescription vmstate_esp_pci_scsi = {
+    .name = "pciespscsi",
+    .version_id = 0,
+    .minimum_version_id = 0,
+    .minimum_version_id_old = 0,
+    .fields = (VMStateField[]) {
+        VMSTATE_PCI_DEVICE(dev, PCIESPState),
+        VMSTATE_BUFFER_UNSAFE(dma_regs, PCIESPState, 0, 8 * sizeof(uint32_t)),
+        VMSTATE_STRUCT(esp, PCIESPState, 0, vmstate_esp, ESPState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void esp_pci_command_complete(SCSIRequest *req, uint32_t status,
+                                     size_t resid)
+{
+    ESPState *s = req->hba_private;
+    PCIESPState *pci = container_of(s, PCIESPState, esp);
+
+    esp_command_complete(req, status, resid);
+    pci->dma_regs[DMA_WBC] = 0;
+    pci->dma_regs[DMA_STAT] |= DMA_STAT_DONE;
+}
+
+static const struct SCSIBusInfo esp_pci_scsi_info = {
+    .tcq = false,
+    .max_target = ESP_MAX_DEVS,
+    .max_lun = 7,
+
+    .transfer_data = esp_transfer_data,
+    .complete = esp_pci_command_complete,
+    .cancel = esp_request_cancelled,
+};
+
+static int esp_pci_scsi_init(PCIDevice *dev)
+{
+    PCIESPState *pci = DO_UPCAST(PCIESPState, dev, dev);
+    ESPState *s = &pci->esp;
+    uint8_t *pci_conf;
+
+    pci_conf = pci->dev.config;
+
+    /* Interrupt pin A */
+    pci_conf[PCI_INTERRUPT_PIN] = 0x01;
+
+    s->dma_memory_read = esp_pci_dma_memory_read;
+    s->dma_memory_write = esp_pci_dma_memory_write;
+    s->dma_opaque = pci;
+    s->chip_id = TCHI_AM53C974;
+    memory_region_init_io(&pci->io, &esp_pci_io_ops, pci, "esp-io", 0x80);
+
+    pci_register_bar(&pci->dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &pci->io);
+    s->irq = pci->dev.irq[0];
+
+    scsi_bus_new(&s->bus, &dev->qdev, &esp_pci_scsi_info);
+    if (!dev->qdev.hotplugged) {
+        return scsi_bus_legacy_handle_cmdline(&s->bus);
+    }
+    return 0;
+}
+
+static int esp_pci_scsi_uninit(PCIDevice *d)
+{
+    PCIESPState *pci = DO_UPCAST(PCIESPState, dev, d);
+
+    memory_region_destroy(&pci->io);
+
+    return 0;
+}
+
+static void esp_pci_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+    k->init = esp_pci_scsi_init;
+    k->exit = esp_pci_scsi_uninit;
+    k->vendor_id = PCI_VENDOR_ID_AMD;
+    k->device_id = PCI_DEVICE_ID_AMD_SCSI;
+    k->revision = 0x10;
+    k->class_id = PCI_CLASS_STORAGE_SCSI;
+    dc->desc = "AMD Am53c974 PCscsi-PCI SCSI adapter";
+    dc->reset = esp_pci_hard_reset;
+    dc->vmsd = &vmstate_esp_pci_scsi;
+}
+
+static TypeInfo esp_pci_info = {
+    .name = "am53c974",
+    .parent = TYPE_PCI_DEVICE,
+    .instance_size = sizeof(PCIESPState),
+    .class_init = esp_pci_class_init,
+};
+
 static void esp_register_types(void)
 {
     type_register_static(&sysbus_esp_info);
+    type_register_static(&esp_pci_info);
 }
 
 type_init(esp_register_types)

hw/pci_ids.h

@@ -59,6 +59,7 @@
 
 #define PCI_VENDOR_ID_AMD                0x1022
 #define PCI_DEVICE_ID_AMD_LANCE          0x2000
+#define PCI_DEVICE_ID_AMD_SCSI           0x2020
 
 #define PCI_VENDOR_ID_TI                 0x104c
 

trace-events

@@ -760,6 +760,18 @@ esp_mem_writeb_cmd_selatn(uint32_t val) "Select with ATN (%2.2x)"
 esp_mem_writeb_cmd_selatns(uint32_t val) "Select with ATN & stop (%2.2x)"
 esp_mem_writeb_cmd_ensel(uint32_t val) "Enable selection (%2.2x)"
 esp_mem_writeb_cmd_dissel(uint32_t val) "Disable selection (%2.2x)"
+esp_pci_error_invalid_dma_direction(void) "invalid DMA transfer direction"
+esp_pci_error_invalid_read(uint32_t reg) "read access outside bounds (reg 0x%x)"
+esp_pci_error_invalid_write(uint32_t reg) "write access outside bounds (reg 0x%x)"
+esp_pci_error_invalid_write_dma(uint32_t val, uint32_t addr) "invalid write of 0x%02x at [0x%x]"
+esp_pci_dma_read(uint32_t saddr, uint32_t reg) "reg[%d]: 0x%8.8x"
+esp_pci_dma_write(uint32_t saddr, uint32_t reg, uint32_t val) "reg[%d]: 0x%8.8x -> 0x%8.8x"
+esp_pci_dma_idle(uint32_t val) "IDLE (%.8x)"
+esp_pci_dma_blast(uint32_t val) "BLAST (%.8x)"
+esp_pci_dma_abort(uint32_t val) "ABORT (%.8x)"
+esp_pci_dma_start(uint32_t val) "START (%.8x)"
+esp_pci_sbac_read(uint32_t reg) "sbac: 0x%8.8x"
+esp_pci_sbac_write(uint32_t reg, uint32_t val) "sbac: 0x%8.8x -> 0x%8.8x"
 
 # monitor.c
 handle_qmp_command(void *mon, const char *cmd_name) "mon %p cmd_name \"%s\""