- 06 4月, 2016 7 次提交
-
-
由 Isaac Lozano 提交于
qemu_hexdump() in util/hexdump.c has been changed to give also include a ascii dump of the buffer. Also, calls to hex_dump() in net/net.c have been replaced with calls to qemu_hexdump(). This takes care of two misc BiteSized Tasks. Reviewed-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NIsaac Lozano <109lozanoi@gmail.com> Signed-off-by: NJason Wang <jasowang@redhat.com>
-
由 Peter Maydell 提交于
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
tcg/mips compilation fix # gpg: Signature made Tue 05 Apr 2016 20:48:38 BST using RSA key ID 4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@redhat.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" * remotes/rth/tags/pull-tcg-20160405: tcg/mips: Fix type of tcg_target_reg_alloc_order[] Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 James Hogan 提交于
The MIPS TCG backend is the only one to have tcg_target_reg_alloc_order[] elements of type TCGReg rather than int. This resulted in commit 91478cef ("tcg: Allocate indirect_base temporaries in a different order") breaking the build on MIPS since the type differed from indirect_reg_alloc_order[]: tcg/tcg.c:1725:44: error: pointer type mismatch in conditional expression [-Werror] order = rev ? indirect_reg_alloc_order : tcg_target_reg_alloc_order; ^ Make it an array of ints to fix the build and match other architectures. Fixes: 91478cef ("tcg: Allocate indirect_base temporaries in a different order") Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Acked-by: NAurelien Jarno <aurelien@aurel32.net> Message-Id: <1459522179-6584-1-git-send-email-james.hogan@imgtec.com> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Ed Maste 提交于
This is the same change as b55266b5 in linux-user. Signed-off-by: NEd Maste <emaste@freebsd.org> Message-id: 1459867593-72017-1-git-send-email-emaste@freebsd.org Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Ed Maste 提交于
Signed-off-by: NEd Maste <emaste@freebsd.org> Message-id: 1459864881-71319-1-git-send-email-emaste@freebsd.org Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Block layer patches for 2.6 # gpg: Signature made Tue 05 Apr 2016 16:32:25 BST using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: crypto: Avoid memory leak on failure qemu-iotests: 149: Use "/usr/bin/env python" block: Forbid I/O throttling on nodes with multiple parents for 2.6 block: forbid x-blockdev-del from acting on DriveInfo Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 05 4月, 2016 33 次提交
-
-
由 Kevin Wolf 提交于
Block patches for the 2.6 release # gpg: Signature made Tue Apr 5 17:23:48 2016 CEST using RSA key ID E838ACAD # gpg: Good signature from "Max Reitz <mreitz@redhat.com>" * mreitz/tags/pull-block-for-kevin-2016-04-05: crypto: Avoid memory leak on failure qemu-iotests: 149: Use "/usr/bin/env python" Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Eric Blake 提交于
Commit 78368575 introduced a memory leak due to invalid use of Error vs. visit_type_end(). If visiting the intermediate members fails, we clear the error and unconditionally use visit_end_struct() on the same error object; but if that cleanup succeeds, we then skip the qapi_free call. Until a later patch adds visit_check_struct(), the only safe approach is to use two separate error objects. Signed-off-by: NEric Blake <eblake@redhat.com> Message-id: 1459526222-30052-1-git-send-email-eblake@redhat.com Signed-off-by: NMax Reitz <mreitz@redhat.com>
-
由 Fam Zheng 提交于
Do the same as other scripts, to pick the correct interpreter between python2 and python3 from the environment. Signed-off-by: NFam Zheng <famz@redhat.com> Message-id: 1459504593-2692-1-git-send-email-famz@redhat.com Signed-off-by: NMax Reitz <mreitz@redhat.com>
-
由 Peter Maydell 提交于
Merge QCrypto fixes 2016/04/05 v1 # gpg: Signature made Tue 05 Apr 2016 10:53:59 BST using RSA key ID 15104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" * remotes/berrange/tags/pull-qcrypto-2016-04-05-1: crypto: fix nettle config check for running pbkdf test crypto: fix typo in docs for secret object type Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
* FreeBSD build fixes (atomics, qapi/error.h) * x86 KVM fixes (SynIC, KVM_GET/SET_MSRS) * Memory API doc fix * checkpatch fix * Chardev and socket fixes * NBD fixes * exec.c SEGV fix # gpg: Signature made Tue 05 Apr 2016 10:47:49 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: net: fix missing include of qapi/error.h in netmap.c nbd: Fix poor debug message include/qemu/atomic: add compile time asserts cpus: don't use atomic_read for vm_clock_warp_start nbd: don't request FUA on FLUSH doc/memory: update MMIO section char: ensure all clients are in non-blocking mode char: fix broken EAGAIN retry on OS-X due to errno clobbering util: retry getaddrinfo if getting EAI_BADFLAGS with AI_V4MAPPED checkpatch: add target_ulong to typelist target-i386: assert that KVM_GET/SET_MSRS can set all requested MSRs target-i386: do not pass MSR_TSC_AUX to KVM ioctls if CPUID bit is not set memory: fix segv on qemu_ram_free(block=0x0) target-i386/kvm: Hyper-V VMBus hypercalls blank handlers update Linux headers to 4.6 Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Daniel P. Berrange 提交于
The pbkdf test is being built based on a check for CONFIG_NETTLE. As of fff2f982, it should be instead checking CONFIG_NETTLE_KDF Reported-by: N"Dr. David Alan Gilbert" <dgilbert@redhat.com> Tested-by: NBruce Rogers <brogers@suse.com> Tested-by: NEd Maste <emaste@freebsd.org> Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The docs for the secret object type specified the wrong number of bytes for the AES initialization vector. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The netmap.c file fails to build on FreeBSD with net/netmap.c:95:9: warning: implicit declaration of function 'error_setg_errno' is invalid in C99 [-Wimplicit-function-declaration] error_setg_errno(errp, errno, "Failed to nm_open() %s", ^ net/netmap.c:432:9: warning: implicit declaration of function 'error_propagate' is invalid in C99 [-Wimplicit-function-declaration] error_propagate(errp, err); ^ Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Message-Id: <1459429690-6144-1-git-send-email-berrange@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Eric Blake 提交于
The client sends messages to the server, not itself. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1459459222-8637-3-git-send-email-eblake@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Alex Bennée 提交于
To be safely portable no atomic access should be trying to do more than the natural word width of the host. The most common abuse is trying to atomically access 64 bit values on a 32 bit host. This patch adds some QEMU_BUILD_BUG_ON to the __atomic instrinsic paths to create a build failure if (sizeof(*ptr) > sizeof(void *)). Signed-off-by: NAlex Bennée <alex.bennee@linaro.org> Message-Id: <1459780549-12942-3-git-send-email-alex.bennee@linaro.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Alex Bennée 提交于
As vm_clock_warp_start is a 64 bit value this causes problems for the compiler trying to come up with a suitable atomic operation on 32 bit hosts. Because the variable is protected by vm_clock_seqlock, we check its value inside a seqlock critical section. Signed-off-by: NAlex Bennée <alex.bennee@linaro.org> Message-Id: <1459780549-12942-2-git-send-email-alex.bennee@linaro.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Eric Blake 提交于
The NBD protocol does not clearly document what will happen if a client sends NBD_CMD_FLAG_FUA on NBD_CMD_FLUSH. Historically, both the qemu and upstream NBD servers silently ignored that flag, but that feels a bit risky. Meanwhile, the qemu NBD client unconditionally sends the flag (without even bothering to check whether the caller cares; at least with NBD_CMD_WRITE the client only sends FUA if requested by a higher layer). There is ongoing discussion on the NBD list to fix the protocol documentation to require that the server MUST ignore the flag (unless the kernel folks can better explain what FUA means for a flush), but until those doc improvements land, the current nbd.git master was recently changed to reject the flag with EINVAL (see nbd commit ab22e082), which now makes it impossible for a qemu client to use FLUSH with an upstream NBD server. We should not send FUA with flush unless the upstream protocol documents what it will do, and even then, it should be something that the caller can opt into, rather than being unconditional. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1459526902-32561-1-git-send-email-eblake@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Cao jin 提交于
There is no memory_region_io(). And remove a stray '-'. Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com> Message-Id: <1459507677-16662-1-git-send-email-caoj.fnst@cn.fujitsu.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Daniel P. Berrange 提交于
Only some callers of tcp_chr_new_client are putting the socket client into non-blocking mode. Move the call to qio_channel_set_blocking() into the tcp_chr_new_client method to guarantee that all code paths set non-blocking mode Reported-by: NAndrew Baumann <Andrew.Baumann@microsoft.com> Reported-by: NLaurent Vivier <lvivier@redhat.com> Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Message-Id: <1458324041-22709-1-git-send-email-berrange@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Daniel P. Berrange 提交于
Some of the chardev I/O paths really want to write the complete data buffer even though the channel is in non-blocking mode. To achieve this they look for EAGAIN and g_usleep() for 100ms. Unfortunately the code is set to check errno == EAGAIN a second time, after the g_usleep() call has completed. On OS-X at least, g_usleep clobbers errno to ETIMEDOUT, causing the retry to be skipped. This failure to retry means the full data isn't written to the chardev backend, which causes various failures including making the tests/ahci-test qtest hang. Rather than playing games trying to reset errno just simplify the code to use a goto to retry instead of a a loop. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Message-Id: <1459438168-8146-2-git-send-email-berrange@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Daniel P. Berrange 提交于
The FreeBSD header files define the AI_V4MAPPED but its implementation of getaddrinfo() always returns an error when that flag is set. eg address resolution failed for localhost:9000: Invalid value for ai_flags There are also reports of the same problem on OS-X 10.6 Since AI_V4MAPPED is not critical functionality, if we get an EAI_BADFLAGS error then just retry without the AI_V4MAPPED flag set. Use a static var to cache this status so we don't have to retry on every single call. Also remove its use from the test suite since it serves no useful purpose there. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Message-Id: <1459786920-15961-1-git-send-email-berrange@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Cédric Le Goater 提交于
In some occasions, a patch [1] can start with a hunk containing a simple type cast. At the time annotate_values() is run, the type is unknown and the cast type is misinterpreted as a identifier, resulting in an error if it is followed with a negative value: ERROR: spaces required around that '-' (ctx:WxV) It seems complex to catch all possible types in a cast expression. So, as a fallback solution, let's add some common qemu types to the typeList array. [1] http://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg06741.htmlSigned-off-by: NCédric Le Goater <clg@fr.ibm.com> Message-Id: <1459503606-31603-1-git-send-email-clg@fr.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
This would have caught the bug in the previous patch. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
KVM does not let you read or write this MSR if the corresponding CPUID bit is not set. This in turn causes MSRs that come after MSR_TSC_AUX to be ignored by KVM_SET_MSRS. One visible symptom is that s3.flat from kvm-unit-tests fails with CPUs that do not have RDTSCP, because the SMBASE is not reset to 0x30000 after reset. Fixes: c9b8f6b6 Cc: qemu-stable@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Marc-André Lureau 提交于
Since f1060c55, the pointer is directly passed to qemu_ram_free(). However, on initialization failure, it may be called with a NULL pointer. Return immediately in this case. This fixes a SEGV when memory initialization failed, for example permission denied on open backing store /dev/hugepages, with -object memory-backend-file,mem-path=/dev/hugepages. Program received signal SIGSEGV, Segmentation fault. 0x00005555556e67e7 in qemu_ram_free (block=0x0) at /home/elmarco/src/qemu/exec.c:1775 Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1459250451-29984-1-git-send-email-marcandre.lureau@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
Add Hyper-V VMBus hypercalls blank handlers which just returns error code - HV_STATUS_INVALID_HYPERCALL_CODE. This is required when the synthetic interrupt controller is active. Fixes: 50efe82cSigned-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Richard Henderson <rth@twiddle.net> CC: Eduardo Habkost <ehabkost@redhat.com> CC: "Andreas Färber" <afaerber@suse.de> CC: Marcelo Tosatti <mtosatti@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: kvm@vger.kernel.org Message-Id: <1456309368-29769-2-git-send-email-asmetanin@virtuozzo.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Peter Maydell 提交于
This pull request includes: - further collapse of the build matrix - enabling MacOSX in the build - make -j3 change Other pending updates are deferred for later in the cycle. # gpg: Signature made Tue 05 Apr 2016 10:11:25 BST using RSA key ID 5A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" * remotes/stsquad/tags/travis-pull-05042016: .travis.yml: make -j3 .travis.yml: enable OSX builds .travis.yml: collapse the test matrix Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Alex Bennée 提交于
The move from Travis VMs to Containers came with a upgrade from 1.5 cores to 2. The received wisdom is -j N+1 means a core can be doing work while other threads wait for IO to complete. This is hard to test on the Travis infrastructure but an initial before/after eyeballing seems to confirm it is an improvement. Signed-off-by: NAlex Bennée <alex.bennee@linaro.org> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
由 Alex Bennée 提交于
Travis has support for OSX builds. Making the setup work cleanly involves a little hacking about with the .travis.yml file but rather than make it too messy I've pushed all the "brew" install stuff into a support script called ./scripts/macosx-brew.sh. Currently only the default ./configure ${CONFIG} is built as I'm not sure what extra coverage would come from the other build stanzas. Signed-off-by: NAlex Bennée <alex.bennee@linaro.org> Acked-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Alex Bennée 提交于
Remove the concept of TARGETS and build the complete target list for each config combination. Now the matrix is just based on CONFIG stanzas and we use the additional stuff for: - things that only work on one compiler (sparse, gcov, gprof) - combos where "make check" fails Signed-off-by: NAlex Bennée <alex.bennee@linaro.org> Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
由 Peter Maydell 提交于
ppc patch queue for 2016-03-24 Three bugfixes for target-ppc, pseries machine type and related devices. 1. Fix a bug in the core code where kvm_vcpu_dirty would not be set before the very first system reset. This meant that if things in the reset path did their own cpu_synchronize_state() it would pull stale data out of KVM. On ppc this, in combination with a previous cleanup meant that the MSR would be zeroed before entry, instead of correctly having the SF (64-bit mode) bit set. 2. Allow immediate detach of hot-added PCI devices which haven't yet been announced to the guest. This fixes a regression: because of a case where we now defer announcement of non-zero functions to the guest, an incorrect hot-add of such a device can't be backed out until the add is completed, which is counter-intuitive to say the least. 3. Fix migration of alternate interrupt locations. The location of interrupt vectors can be affected by the LPCR, and we weren't correctly recalculating this after migration of a non-standard LPCR value. # gpg: Signature made Tue 05 Apr 2016 03:13:41 BST using RSA key ID 20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.6-20160405: vl: Move cpu_synchronize_all_states() into qemu_system_reset() spapr_drc: enable immediate detach for unsignalled devices ppc: Rework POWER7 & POWER8 exception model Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Kevin Wolf 提交于
As the patches to move I/O throttling to BlockBackend didn't make it in time for the 2.6 release, but the release adds new ways of configuring VMs whose behaviour would change once the move is done, we need to outlaw such configurations temporarily. The problem exists whenever a BDS has more users than just its BB, for example it is used as a backing file for another node. (This wasn't possible in 2.5 yet as we introduced node references to specify a backing file only recently.) In these cases, the throttling would apply to these other users now, but after moving throttling to the BlockBackend the other users wouldn't be throttled any more. This patch prevents making new references to a throttled node as well as using monitor commands to throttle a node with multiple parents. Compared to 2.5 this changes behaviour in some corner cases where references were allowed before, like bs->file or Quorum children. It seems reasonable to assume that users didn't use I/O throttling on such low level nodes. With the upcoming move of throttling into BlockBackend, such configurations won't be possible anyway. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Paolo Bonzini 提交于
Failing on -drive/drive_add created BlockBackends was a requirement for x-blockdev-del, but it sneaked through the patch review. Let's fix it now. Example: $ x86_64-softmmu/qemu-system-x86_64 -drive if=none,file=null-co://,id=null -qmp stdio >> {'execute':'qmp_capabilities'} << {"return": {}} >> {'execute':'x-blockdev-del','arguments':{'id':'null'}} << {"error": {"class": "GenericError", "desc": "Deleting block backend added with drive-add is not supported"}} And without a DriveInfo: >> { "execute": "blockdev-add", "arguments": { "options": { "driver":"null-co", "id":"null2"}}} << {"return": {}} >> {'execute':'x-blockdev-del','arguments':{'id':'null2'}} << {"return": {}} Suggested-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 David Gibson 提交于
There are currently 3 calls to qemu_system_reset() in vl.c. Two of them are immediately preceded by a cpu_synchronize_all_states9) and the remaining one should be. The one which doesn't is the very first reset called directly from main(). Without a cpu_synchronize_all_states(), kvm_vcpu_dirty is false at this point from the earlier cpu_synchronize_all_post_init(). That's incorrect because the reset path is quite likely to update the CPU state, and that updated state should be pushed back to KVM, not overwritten with stale data pushed to KVM immediately after init. This patch moves the call to cpu_synchronize_all_states() into qemu_system_reset() for safety, so it is always called. AFAICT this should be safe for the handful of callers outside vl.c - these all appear to be in places where the cpu state is already synchronized so the extra call will be a no-op. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Acked-by: NPaolo Bonzini <pbonzini@redhat.com> Tested-by: NLaurent Vivier <lvivier@redhat.com>
-
由 Michael Roth 提交于
Currently spapr doesn't support "aborting" hotplug of PCI devices by allowing device_del to immediately remove the device if we haven't signalled the presence of the device to the guest. In the past this wasn't an issue, since we always immediately signalled device attach and simply relied on full guest-aware add->remove path for device removal. However, as of 788d2599, we now defer signalling for PCI functions until function 0 is attached, so now we need to deal with these "abort" operations for cases where a user hotplugs a non-0 function, then opts to remove it prior hotplugging function 0. Currently they'd have to reboot before the unplug completed. PCIe multifunction hotplug does not have this requirement however, so from a management implementation perspective it would be good to address this within the same release as 788d2599. We accomplish this by simply adding a 'signalled' flag to track whether a device hotplug event has been sent to the guest. If it hasn't, we allow immediate removal under the assumption that the guest will not be using the device. Devices present at boot/reset time are also assumed to be 'signalled'. For CPU/memory/etc, signalling will still happen immediately as part of device_add, so only PCI functions should be affected. Cc: bharata@linux.vnet.ibm.com Cc: david@gibson.dropbear.id.au Cc: sbhat@linux.vnet.ibm.com Cc: qemu-ppc@nongnu.org Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com> [dwg: This fixes a regression where an incorrect hot-add of a non-zero function can no longer be backed out until function 0 is added] Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
由 Cédric Le Goater 提交于
From: Benjamin Herrenschmidt <benh@kernel.crashing.org> This patch fixes the current AIL implementation for POWER8. The interrupt vector address can be calculated directly from LPCR when the exception is handled. The excp_prefix update becomes useless and we can cleanup the H_SET_MODE hcall. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> [clg: Removed LPES0/1 handling for HV vs. !HV Fixed LPCR_ILE case for POWERPC_EXCP_POWER8 ] Signed-off-by: NCédric Le Goater <clg@fr.ibm.com> [dwg: This was written as a cleanup, but it also fixes a real bug where setting an alternative interrupt location would not be correctly migrated] Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
由 Peter Maydell 提交于
target-arm queue: * bcm2836: wire up CPU timer interrupts correctly * linux-user: ignore EXCP_YIELD in ARM cpu_loop() * target-arm: correctly reset SCTLR_EL3 * target-arm: remove incorrect ALIAS tags from ESR_EL2 and ESR_EL3 * target-arm: make the 64-bit version of VTCR do the migration # gpg: Signature made Mon 04 Apr 2016 17:42:16 BST using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" * remotes/pmaydell/tags/pull-target-arm-20160404: target-arm: Make the 64-bit version of VTCR do the migration target-arm: Remove incorrect ALIAS tags from ESR_EL2 and ESR_EL3 target-arm: Correctly reset SCTLR_EL3 for 64-bit CPUs linux-user: arm: Handle (ignore) EXCP_YIELD in ARM cpu_loop() hw/arm/bcm2836: Wire up CPU timer interrupts correctly Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-