update Linux headers to 4.6

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

include/standard-headers/asm-x86/hyperv.h

@@ -226,7 +226,9 @@
 		(~((1ull << HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_SHIFT) - 1))
 
 /* Declare the various hypercall operations. */
-#define HV_X64_HV_NOTIFY_LONG_SPIN_WAIT		0x0008
+#define HVCALL_NOTIFY_LONG_SPIN_WAIT		0x0008
+#define HVCALL_POST_MESSAGE			0x005c
+#define HVCALL_SIGNAL_EVENT			0x005d
 
 #define HV_X64_MSR_APIC_ASSIST_PAGE_ENABLE		0x00000001
 #define HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT	12

include/standard-headers/linux/input.h

@@ -243,6 +243,7 @@ struct input_mask {
 #define BUS_GSC			0x1A
 #define BUS_ATARI		0x1B
 #define BUS_SPI			0x1C
+#define BUS_RMI			0x1D
 
 /*
  * MT_TOOL types

include/standard-headers/linux/types.h

-#include <stdint.h>
-#include "qemu/compiler.h"
+/* For QEMU all types are already defined via osdep.h, so this
+ * header does not need to do anything.
+ */

include/standard-headers/linux/virtio_balloon.h

@@ -51,7 +51,7 @@ struct virtio_balloon_config {
 #define VIRTIO_BALLOON_S_MINFLT   3   /* Number of minor faults */
 #define VIRTIO_BALLOON_S_MEMFREE  4   /* Total amount of free memory */
 #define VIRTIO_BALLOON_S_MEMTOT   5   /* Total amount of memory */
-#define VIRTIO_BALLOON_S_AVAIL    6   /* Amount of available memory in guest */
+#define VIRTIO_BALLOON_S_AVAIL    6   /* Available memory as in /proc */
 #define VIRTIO_BALLOON_S_NR       7
 
 /*

include/standard-headers/linux/virtio_blk.h

@@ -43,10 +43,10 @@
 #ifndef VIRTIO_BLK_NO_LEGACY
 #define VIRTIO_BLK_F_BARRIER	0	/* Does host support barriers? */
 #define VIRTIO_BLK_F_SCSI	7	/* Supports scsi command passthru */
-#define VIRTIO_BLK_F_WCE	9	/* Writeback mode enabled after reset */
+#define VIRTIO_BLK_F_FLUSH	9	/* Flush command supported */
 #define VIRTIO_BLK_F_CONFIG_WCE	11	/* Writeback mode available in config */
-/* Old (deprecated) name for VIRTIO_BLK_F_WCE. */
-#define VIRTIO_BLK_F_FLUSH VIRTIO_BLK_F_WCE
+/* Old (deprecated) name for VIRTIO_BLK_F_FLUSH. */
+#define VIRTIO_BLK_F_WCE VIRTIO_BLK_F_FLUSH
 #endif /* !VIRTIO_BLK_NO_LEGACY */
 
 #define VIRTIO_BLK_ID_BYTES	20	/* ID string length */

linux-headers/asm-arm64/kvm.h

@@ -94,6 +94,7 @@ struct kvm_regs {
 #define KVM_ARM_VCPU_POWER_OFF		0 /* CPU is started in OFF state */
 #define KVM_ARM_VCPU_EL1_32BIT		1 /* CPU running a 32bit VM */
 #define KVM_ARM_VCPU_PSCI_0_2		2 /* CPU uses PSCI v0.2 */
+#define KVM_ARM_VCPU_PMU_V3		3 /* Support guest PMUv3 */
 
 struct kvm_vcpu_init {
 	__u32 target;
@@ -204,6 +205,11 @@ struct kvm_arch_memory_slot {
 #define KVM_DEV_ARM_VGIC_GRP_CTRL	4
 #define   KVM_DEV_ARM_VGIC_CTRL_INIT	0
 
+/* Device Control API on vcpu fd */
+#define KVM_ARM_VCPU_PMU_V3_CTRL	0
+#define   KVM_ARM_VCPU_PMU_V3_IRQ	0
+#define   KVM_ARM_VCPU_PMU_V3_INIT	1
+
 /* KVM_IRQ_LINE irq field index values */
 #define KVM_ARM_IRQ_TYPE_SHIFT		24
 #define KVM_ARM_IRQ_TYPE_MASK		0xff

linux-headers/asm-powerpc/epapr_hcalls.h

@@ -78,7 +78,7 @@
 #define EV_SUCCESS		0
 #define EV_EPERM		1	/* Operation not permitted */
 #define EV_ENOENT		2	/*  Entry Not Found */
-#define EV_EIO			3	/* I/O error occured */
+#define EV_EIO			3	/* I/O error occurred */
 #define EV_EAGAIN		4	/* The operation had insufficient
 					 * resources to complete and should be
 					 * retried
@@ -89,7 +89,7 @@
 #define EV_ENODEV		7	/* No such device */
 #define EV_EINVAL		8	/* An argument supplied to the hcall
 					   was out of range or invalid */
-#define EV_INTERNAL		9	/* An internal error occured */
+#define EV_INTERNAL		9	/* An internal error occurred */
 #define EV_CONFIG		10	/* A configuration error was detected */
 #define EV_INVALID_STATE	11	/* The object is in an invalid state */
 #define EV_UNIMPLEMENTED	12	/* Unimplemented hypercall */

linux-headers/asm-powerpc/kvm.h

@@ -333,6 +333,15 @@ struct kvm_create_spapr_tce {
 	__u32 window_size;
 };
 
+/* for KVM_CAP_SPAPR_TCE_64 */
+struct kvm_create_spapr_tce_64 {
+	__u64 liobn;
+	__u32 page_shift;
+	__u32 flags;
+	__u64 offset;	/* in pages */
+	__u64 size;	/* in pages */
+};
+
 /* for KVM_ALLOCATE_RMA */
 struct kvm_allocate_rma {
 	__u64 rma_size;

linux-headers/asm-x86/unistd_32.h

@@ -375,5 +375,7 @@
 #define __NR_membarrier 375
 #define __NR_mlock2 376
 #define __NR_copy_file_range 377
+#define __NR_preadv2 378
+#define __NR_pwritev2 379
 
 #endif /* _ASM_X86_UNISTD_32_H */

linux-headers/asm-x86/unistd_64.h

@@ -328,5 +328,7 @@
 #define __NR_membarrier 324
 #define __NR_mlock2 325
 #define __NR_copy_file_range 326
+#define __NR_preadv2 327
+#define __NR_pwritev2 328
 
 #endif /* _ASM_X86_UNISTD_64_H */

linux-headers/linux/kvm.h

@@ -157,6 +157,7 @@ struct kvm_s390_skeys {
 
 struct kvm_hyperv_exit {
 #define KVM_EXIT_HYPERV_SYNIC          1
+#define KVM_EXIT_HYPERV_HCALL          2
 	__u32 type;
 	union {
 		struct {
@@ -165,6 +166,11 @@ struct kvm_hyperv_exit {
 			__u64 evt_page;
 			__u64 msg_page;
 		} synic;
+		struct {
+			__u64 input;
+			__u64 result;
+			__u64 params[2];
+		} hcall;
 	} u;
 };
 
@@ -856,6 +862,9 @@ struct kvm_ppc_smmu_info {
 #define KVM_CAP_IOEVENTFD_ANY_LENGTH 122
 #define KVM_CAP_HYPERV_SYNIC 123
 #define KVM_CAP_S390_RI 124
+#define KVM_CAP_SPAPR_TCE_64 125
+#define KVM_CAP_ARM_PMU_V3 126
+#define KVM_CAP_VCPU_ATTRIBUTES 127
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
@@ -1148,6 +1157,8 @@ struct kvm_s390_ucas_mapping {
 /* Available with KVM_CAP_PPC_ALLOC_HTAB */
 #define KVM_PPC_ALLOCATE_HTAB	  _IOWR(KVMIO, 0xa7, __u32)
 #define KVM_CREATE_SPAPR_TCE	  _IOW(KVMIO,  0xa8, struct kvm_create_spapr_tce)
+#define KVM_CREATE_SPAPR_TCE_64	  _IOW(KVMIO,  0xa8, \
+				       struct kvm_create_spapr_tce_64)
 /* Available with KVM_CAP_RMA */
 #define KVM_ALLOCATE_RMA	  _IOR(KVMIO,  0xa9, struct kvm_allocate_rma)
 /* Available with KVM_CAP_PPC_HTAB_FD */

linux-headers/linux/userfaultfd.h

@@ -78,7 +78,7 @@ struct uffd_msg {
 			__u64	reserved3;
 		} reserved;
 	} arg;
-} __packed;
+} __attribute__((packed));
 
 /*
  * Start at 0x12 and not at 0 to be more strict against bugs.

linux-headers/linux/vfio.h

@@ -59,6 +59,33 @@
 #define VFIO_TYPE	(';')
 #define VFIO_BASE	100
 
+/*
+ * For extension of INFO ioctls, VFIO makes use of a capability chain
+ * designed after PCI/e capabilities.  A flag bit indicates whether
+ * this capability chain is supported and a field defined in the fixed
+ * structure defines the offset of the first capability in the chain.
+ * This field is only valid when the corresponding bit in the flags
+ * bitmap is set.  This offset field is relative to the start of the
+ * INFO buffer, as is the next field within each capability header.
+ * The id within the header is a shared address space per INFO ioctl,
+ * while the version field is specific to the capability id.  The
+ * contents following the header are specific to the capability id.
+ */
+struct vfio_info_cap_header {
+	__u16	id;		/* Identifies capability */
+	__u16	version;	/* Version specific to the capability ID */
+	__u32	next;		/* Offset of next capability */
+};
+
+/*
+ * Callers of INFO ioctls passing insufficiently sized buffers will see
+ * the capability chain flag bit set, a zero value for the first capability
+ * offset (if available within the provided argsz), and argsz will be
+ * updated to report the necessary buffer size.  For compatibility, the
+ * INFO ioctl will not report error in this case, but the capability chain
+ * will not be available.
+ */
+
 /* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */
 
 /**
@@ -194,13 +221,73 @@ struct vfio_region_info {
 #define VFIO_REGION_INFO_FLAG_READ	(1 << 0) /* Region supports read */
 #define VFIO_REGION_INFO_FLAG_WRITE	(1 << 1) /* Region supports write */
 #define VFIO_REGION_INFO_FLAG_MMAP	(1 << 2) /* Region supports mmap */
+#define VFIO_REGION_INFO_FLAG_CAPS	(1 << 3) /* Info supports caps */
 	__u32	index;		/* Region index */
-	__u32	resv;		/* Reserved for alignment */
+	__u32	cap_offset;	/* Offset within info struct of first cap */
 	__u64	size;		/* Region size (bytes) */
 	__u64	offset;		/* Region offset from start of device fd */
 };
 #define VFIO_DEVICE_GET_REGION_INFO	_IO(VFIO_TYPE, VFIO_BASE + 8)
 
+/*
+ * The sparse mmap capability allows finer granularity of specifying areas
+ * within a region with mmap support.  When specified, the user should only
+ * mmap the offset ranges specified by the areas array.  mmaps outside of the
+ * areas specified may fail (such as the range covering a PCI MSI-X table) or
+ * may result in improper device behavior.
+ *
+ * The structures below define version 1 of this capability.
+ */
+#define VFIO_REGION_INFO_CAP_SPARSE_MMAP	1
+
+struct vfio_region_sparse_mmap_area {
+	__u64	offset;	/* Offset of mmap'able area within region */
+	__u64	size;	/* Size of mmap'able area */
+};
+
+struct vfio_region_info_cap_sparse_mmap {
+	struct vfio_info_cap_header header;
+	__u32	nr_areas;
+	__u32	reserved;
+	struct vfio_region_sparse_mmap_area areas[];
+};
+
+/*
+ * The device specific type capability allows regions unique to a specific
+ * device or class of devices to be exposed.  This helps solve the problem for
+ * vfio bus drivers of defining which region indexes correspond to which region
+ * on the device, without needing to resort to static indexes, as done by
+ * vfio-pci.  For instance, if we were to go back in time, we might remove
+ * VFIO_PCI_VGA_REGION_INDEX and let vfio-pci simply define that all indexes
+ * greater than or equal to VFIO_PCI_NUM_REGIONS are device specific and we'd
+ * make a "VGA" device specific type to describe the VGA access space.  This
+ * means that non-VGA devices wouldn't need to waste this index, and thus the
+ * address space associated with it due to implementation of device file
+ * descriptor offsets in vfio-pci.
+ *
+ * The current implementation is now part of the user ABI, so we can't use this
+ * for VGA, but there are other upcoming use cases, such as opregions for Intel
+ * IGD devices and framebuffers for vGPU devices.  We missed VGA, but we'll
+ * use this for future additions.
+ *
+ * The structure below defines version 1 of this capability.
+ */
+#define VFIO_REGION_INFO_CAP_TYPE	2
+
+struct vfio_region_info_cap_type {
+	struct vfio_info_cap_header header;
+	__u32 type;	/* global per bus driver */
+	__u32 subtype;	/* type specific */
+};
+
+#define VFIO_REGION_TYPE_PCI_VENDOR_TYPE	(1 << 31)
+#define VFIO_REGION_TYPE_PCI_VENDOR_MASK	(0xffff)
+
+/* 8086 Vendor sub-types */
+#define VFIO_REGION_SUBTYPE_INTEL_IGD_OPREGION	(1)
+#define VFIO_REGION_SUBTYPE_INTEL_IGD_HOST_CFG	(2)
+#define VFIO_REGION_SUBTYPE_INTEL_IGD_LPC_CFG	(3)
+
 /**
  * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9,
  *				    struct vfio_irq_info)
@@ -336,7 +423,8 @@ enum {
 	 * between described ranges are unimplemented.
 	 */
 	VFIO_PCI_VGA_REGION_INDEX,
-	VFIO_PCI_NUM_REGIONS
+	VFIO_PCI_NUM_REGIONS = 9 /* Fixed user ABI, region indexes >=9 use */
+				 /* device specific cap to define content. */
 };
 
 enum {

linux-headers/linux/vhost.h

@@ -126,6 +126,12 @@ struct vhost_memory {
 #define VHOST_SET_VRING_CALL _IOW(VHOST_VIRTIO, 0x21, struct vhost_vring_file)
 /* Set eventfd to signal an error */
 #define VHOST_SET_VRING_ERR _IOW(VHOST_VIRTIO, 0x22, struct vhost_vring_file)
+/* Set busy loop timeout (in us) */
+#define VHOST_SET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x23,	\
+					 struct vhost_vring_state)
+/* Get busy loop timeout (in us) */
+#define VHOST_GET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x24,	\
+					 struct vhost_vring_state)
 
 /* VHOST_NET specific defines */