update seabios to release 1.8.2
add vgabios for virtio-vga

# gpg: Signature made Wed Jun 17 08:34:22 2015 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-seabios-1.8.2-20150617-1:
  update seabios and vgabios binaries
  tag our seabios builds
  update seabios submodule to release 1.8.2
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

VirtFS update:

* Fix for virtfs-proxy-helper crash
* Gracefully handle the error condition on input validation in virtfs-proxy-helper

# gpg: Signature made Tue Jun 16 16:21:28 2015 BST using RSA key ID 04C4E23A
# gpg: Good signature from "Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4846 9DE7 1860 360F A6E9  968C DE41 A4FE 04C4 E23A

* remotes/kvaneesh/tags/for-upstream-signed:
  virtfs-proxy-helper: fail gracefully if socket path is too long
  virtfs-proxy-helper: add missing long option terminator
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

git shortlog rel-1.8.1..rel-1.8.2
=================================

Gerd Hoffmann (1):
      vga: rework virtio-vga support

Kevin O'Connor (5):
      vgabios: Add config option for assembler fixups
      vgabios: Emulate "leal" instruction
      build: Support "make VERSION=xyz" to override the default build version
      build: CONFIG_VGA_FIXUP_ASM should depend on CONFIG_BUILD_VGABIOS
      vgabios: On bda_save_restore() the saved vbe_mode also has flags in it

Paolo Bonzini (1):
      smm: ignore bits 16,18-31 of SMM revision ID

Vladimir Serbinenko (1):
      ahci: Ignore max_ports.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Replace the assertion check with graceful failure when the socket path
is too long.  Programs should not crash on invalid input.  Print an
error message and exit properly.

Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

The getopt_long(3) long options array must have a zeroed terminator.

This patch solves a segmentation fault when an unknown command-line
option is encountered:

  $ fsdev/virtfs-proxy-helper --help
  Segmentation fault (core dumped)
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

virtio-gpu: pci support bits and virtio-vga.

# gpg: Signature made Mon Jun 15 13:55:19 2015 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vga-20150615-1:
  virtio-vga: add vgabios configuration
  virtio-vga: add '-vga virtio' support
  virtio-vga: add virtio gpu device with vga compatibility
  virtio-gpu-pci: add virtio pci support
  virtio-gpu: fix error message
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

linux-user patches for 2.4 softfreeze
second spin with ioctl patch refreshed

# gpg: Signature made Tue Jun 16 08:03:14 2015 BST using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg:                 aka "Riku Voipio <riku.voipio@linaro.org>"

* remotes/riku/tags/pull-linux-user-20150616:
  linux-user: ioctl() command type is int
  linux-user: fix the breakpoint inheritance in spawned threads
  linux-user: use __get_user and __put_user in cmsg conversions
  linux-user: Fix length handling in host_to_target_cmsg
  linux-user: Use abi_ulong for TARGET_ELF_PAGESTART
  linux-user: Allocate thunk size dynamically
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When executing a 64bit target chroot on 64bit host,
the ioctl() command can mismatch.

It seems the previous commit doesn't solve the problem in
my case:

    9c6bf9c7 linux-user: Fix ioctl cmd type mismatch on 64-bit targets

For example, a ppc64 chroot on an x86_64 host:

bash-4.3# ls
Unsupported ioctl: cmd=0x80087467
Unsupported ioctl: cmd=0x802c7415

The origin of the problem is in syscall.c:do_ioctl().

    static abi_long do_ioctl(int fd, abi_long cmd, abi_long arg)

In this case (ppc64) abi_long is long (on the x86_64), and

    cmd = 0x0000000080087467

then
    if (ie->target_cmd == cmd)

target_cmd is int, so target_cmd = 0x80087467
and to compare an int with a long, the sign is extended to 64bit,
so the comparison is:

    if (0xffffffff80087467 == 0x0000000080087467)

which doesn't match whereas it should.

This patch uses int in the case of the target command type
instead of abi_long.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

When a thread is spawned, cpu_copy re-initializes
the bp & wp lists of current thread, instead of the ones
of the new thread.
The effect is that breakpoints are no longer hit.
Signed-off-by: NThierry Bultel <thierry.bultel@basystemes.fr>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

The target payloads in cmsg conversions may not have the alignment
required by the host. Using the get_user and put_user functions is
the easiest way to handle this and also do the byte-swapping we
require.

(Note that prior to this commit target_to_host_cmsg was incorrectly
using __put_user() rather than __get_user() for the SCM_CREDENTIALS
conversion, which meant it wasn't getting the benefit of the
misalignment handling.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

The previous code for handling payload length when converting
cmsg structures from host to target had a number of problems:
 * we required the msg->msg_controllen to declare the buffer
   to have enough space for final trailing padding (we were
   checking against CMSG_SPACE), whereas the kernel does not
   require this, and common userspace code assumes this. (In
   particular, glibc's "try to talk to nscd" code that it will
   run on startup will receive a cmsg with a 4 byte payload and
   only allocate 4 bytes for it, which was causing us to do
   the wrong thing on architectures that need 8-alignment.)
 * we weren't correctly handling the fact that the SO_TIMESTAMP
   payload may be larger for the target than the host
 * we weren't marking the messages with MSG_CTRUNC when we did
   need to truncate a message that wasn't truncated by the host,
   but were instead logging a QEMU message; since truncation is
   always the result of a guest giving us an insufficiently
   sized buffer, we should report it to the guest as the kernel
   does and don't log anything

Rewrite the parts of the function that deal with length to
fix these issues, and add a comment in target_to_host_cmsg
to explain why the overflow logging it does is a QEMU bug,
not a guest issue.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

target-arm queue:
 * Handle "extended small page" descriptors correctly
 * Use extended address bits from supersection short descriptors
 * Update interrupt status for all cores in gic_update
 * Fix off-by-one in exynos4210_fimd bit-swap code
 * Remove stray unused 'pending_exception' field
 * Add Cortex-A53 KVM support
 * Fix reset value of REVIDR
 * Add AArch32 MIDR aliases for ARMv8 cores
 * MAINTAINERS update for ARM ACPI code
 * Trust the kernel's value of MPIDR if we're using KVM
 * Various pxa2xx device updates to avoid old APIs
 * Mark pxa2xx copro registers as ARM_CP_IO so -icount works
 * Correctly UNDEF Thumb2 DSP insns on Cortex-M3
 * Initial work towards implementing PMSAv7
 * Fix a reset order bug introduced recently
 * Correct "preferred return address" for cpreg access exceptions
 * Add ACPI SPCR table for the virt board

# gpg: Signature made Mon Jun 15 18:19:34 2015 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20150615: (28 commits)
  hw/arm/virt-acpi-build: Add SPCR table
  ACPI: Add definitions for the SPCR table
  target-arm: Correct "preferred return address" for cpreg access exceptions
  hw/arm/boot: fix rom_reset notifier registration order
  arm: helper: rename get_phys_addr_mpu
  arm: Add has-mpu property
  arm: Implement uniprocessor with MP config
  arm: Refactor get_phys_addr FSR return mechanism
  arm: helper: Factor out CP regs common to [pv]msa
  arm: Don't add v7mp registers in MPU systems
  arm: Do not define TLBTR in PMSA systems
  target-arm: Add the THUMB_DSP feature
  hw/sd/pxa2xx_mmci: Stop using old_mmio in MemoryRegionOps
  hw/arm/pxa2xx: Convert pxa2xx-ssp to VMState
  hw/arm/pxa2xx: Add reset method for pxa2xx_ssp
  hw/arm/pxa2xx: Convert pxa2xx-fir to QOM and VMState
  hw/arm/pxa2xx: Mark coprocessor registers as ARM_CP_IO
  target-arm: Use the kernel's idea of MPIDR if we're using KVM
  MAINTAINERS: Add myself as ARM ACPI Subsystem maintainer
  target-arm: add AArch32 MIDR aliases in ARMv8
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NAndrew Jones <drjones@redhat.com>
Tested-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Message-id: 1433929959-29530-3-git-send-email-drjones@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

SPCR is the Serial Port Console Redirection Table. See the document
linked from http://uefi.org/acpi. For serial port types, "Interface
Type", see the documentation for the Debug Port Table 2 (DBG2).
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Tested-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Message-id: 1433929959-29530-2-git-send-email-drjones@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The architecture defines that when taking an exception trying to
access a coprocessor register, the "preferred return address" for
the exception is the address of the instruction that caused the
exception. Correct an off-by-4 error which meant we were returning
the address after the instruction for traps which happened because
of a failure of a runtime access-check function on an AArch32
register. (Traps caused by translate-time checkable permissions
failures had the correct address, as did traps on AArch64 registers.)

This fixes https://bugs.launchpad.net/qemu/+bug/1463338Reported-by: NRobert Buhren <robert@robertbuhren.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1433861440-30133-1-git-send-email-peter.maydell@linaro.org

commit ac9d32e3 had the consequence to
register the do_cpu_reset after the rom_reset one. Hence they get
executed in the wrong order. This commit restores the registration of
do_cpu_reset in arm_load_kernel.
Signed-off-by: NEric Auger <eric.auger@linaro.org>
Reported-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434111582-9325-1-git-send-email-eric.auger@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This get_phys_addr is really for pmsav5. Rename it accordingly.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: bf4b019aa87d682a45998105ef8e4d4e97a5e117.1434066412.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

For processors that support MPUs, add a property to de-feature it. This
is similar to the implementation of the EL3 feature.

The processor definition in init sets ARM_FEATURE_MPU if it can support
an MPU. post_init exposes the property, defaulting to true. If cleared
by the instantiator, ARM_FEATURE_MPU is then removed at realize time.

This is to support R profile processors that may or may-not have an MPU
configured.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 632918cc48786e868ea18aa6bd12f70597994cad.1434066412.git.peter.crosthwaite@xilinx.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a boolean for indicating uniprocessors with MP extensions. This
drives the U bit in MPIDR. Prepares support for Cortex-R5.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a70a80583df265e0174f01fa1fc92b33ea6d1db5.1434066412.git.peter.crosthwaite@xilinx.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Currently, the return code for get_phys_addr is overloaded for both
success/fail and FSR value return. This doesn't handle the case where
there is an error with a 0 FSR. This case exists in PMSAv7.

So rework get_phys_addr and friends to return a success/failure boolean
return code and populate the FSR via a caller provided uint32_t
pointer.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a209e3d8ae00cda55260c970891f520210e26bad.1434066412.git.peter.crosthwaite@xilinx.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

V6+ PMSA and VMSA share some common registers that are currently
in the VMSA definition block. Split them out into a new def that can
be shared to PMSA.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 284db78a43c63c9bfbb60de539672c361bcb6af8.1434066412.git.peter.crosthwaite@xilinx.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

These registers are VMSA specific so they should be conditional on
VMSA (i.e. !MPU).
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 7bb8843e45f2635c6b7a583c5bb5da51ed4442a0.1434066412.git.peter.crosthwaite@xilinx.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If doing a PMSA (MPU) system do not define the VMSA specific TLBTR CP.
The def is done separately from VMSA registers group as it is affected
by both the OMAP/STRONGARM RW errata and the MIDR backgrounding.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: b03fea3840207edf633f5c9189400c3dd6a28d14.1434066412.git.peter.crosthwaite@xilinx.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Create an ARM_FEATURE_THUMB_DSP controlling the Thumb encodings of
the 85 DSP instructions (these are all Thumb2). This is enabled for
all non-M-profile CPUs with Thumb2 support, as the instructions are
mandatory for R and A profiles. On M profile they are optional and
not present in the Cortex-M3 (though they are in the M4).

The effect of this commit is that we will now treat the DSP
encodings as illegal instructions on M3, when previously we
incorrectly implemented them.
Signed-off-by: NAurelio C. Remonda <aurelioremonda@gmail.com>
Message-id: 1434311355-26554-1-git-send-email-aurelioremonda@gmail.com
[PMM: added clz/crc32/crc32c and default case to the early-decode switch;
 minor format/spacing fixups; reworded commit message a bit]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Update the pxa2xx_mmci device to stop using the old_mmio read
and write callbacks in its MemoryRegionOps. This actually
simplifies the code because the separate byte/halfword/word
access functions were all calling into a single function to
do the work anyway.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434117989-7367-6-git-send-email-peter.maydell@linaro.org

The pxa2xx-ssp device is already a QOM device but is still
using the old-style register_savevm(); convert to VMState.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434117989-7367-5-git-send-email-peter.maydell@linaro.org

The pxa2xx_ssp device was missing a reset method; add one.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter..crosthwaite@xilinx.com>
Message-id: 1434117989-7367-4-git-send-email-peter.maydell@linaro.org

Convert the pxa2xx-fir device to QOM, including using a
VMState for its migration info.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434117989-7367-3-git-send-email-peter.maydell@linaro.org

The pxa2xx custom coprocessor registers in cp6 and cp14 do device
accesses, so mark the non-constant regs as ARM_CP_IO so that
icount works correctly and doesn't abort.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434117989-7367-2-git-send-email-peter.maydell@linaro.org

When we're using KVM, the kernel's internal idea of the MPIDR
affinity fields must match the values we tell it for the guest
vcpu cluster configuration in the device tree. Since at the moment
the kernel doesn't support letting userspace tell it the correct
affinity fields to use, we must read the kernel's view and
reflect that back in the device tree.
Signed-off-by: NShlomo Pongratz <shlomo.pongratz@huawei.com>
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Message-id: 02f601d0a1e6$90c7d630$b2578290$@samsung.com
[PMM: Use a local #define rather than a global variable for
 the TCG ARM_CPUS_PER_CLUSTER setting. Tweak a comment. Update the
 commit message.]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add Shannon Zhao as the maintainer for the ARM ACPI Subsystem.
Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NClaudio Fontana <claudio.fontana@huawei.com>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1433248318-6076-1-git-send-email-shannon.zhao@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

According to ARMv8 ARM, there are additional aliases to MIDR system register in
AArch32 state. So add them to the list.
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1433321048-23793-3-git-send-email-serge.fdrv@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

According to ARM Cortex-A53/A57 TRM, REVIDR reset value should be zero. So let
REVIDR reset value be specified by CPU model and correct it for Cortex-A53/A57.
Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1433321048-23793-2-git-send-email-serge.fdrv@gmail.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add cortex-a53 cpu support in machine virt, so it can be used for TCG
and KVM.
Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1433207452-4512-3-git-send-email-shannon.zhao@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Since commit e3531026(target-arm: cpu64: Add support for Cortex-A53) has
added Cortex-A53 cpu support for target-arm, this patch just enables it
for kvm-arm.

Here adding XGENE_POTENZA just makes the enum continuous.
Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Message-id: 1433207452-4512-2-git-send-email-shannon.zhao@linaro.org
[PMM: Don't add the CPU types to cpus_to_try[]; this array only
 lists old CPUs which were supported in pre-PREFERRED_TARGET kernels]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This isn't used by any of the code. In fact it looks like it was never
used as it came in with ARMv7 support.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1434020015-8868-1-git-send-email-alex.bennee@linaro.org
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

fimd_swap_data() includes code to reverse the bits in a
64-bit integer, but an off-by-one error meant that it would
try to shift off the top of the integer. Correct the bug
(spotted by Coverity).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1432912615-23107-1-git-send-email-peter.maydell@linaro.org

This patch fixes so that gic_update always updates all the cores with
new pending irq states.  If the function returns early it is possible
to get interrupts that has already been acknowledged.
Signed-off-by: NJohan Karlsson <johan.karlsson@enea.com>
[PMM: rebased to apply to current master]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>