提交 13e1e476 编写于 作者: P Peter Maydell

hw/sd/pxa2xx_mmci: Stop using old_mmio in MemoryRegionOps

Update the pxa2xx_mmci device to stop using the old_mmio read
and write callbacks in its MemoryRegionOps. This actually
simplifies the code because the separate byte/halfword/word
access functions were all calling into a single function to
do the work anyway.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434117989-7367-6-git-send-email-peter.maydell@linaro.org
上级 8e079caf
......@@ -48,7 +48,6 @@ struct PXA2xxMMCIState {
int resp_len;
int cmdreq;
int ac_width;
};
#define MMC_STRPCL 0x00 /* MMC Clock Start/Stop register */
......@@ -215,7 +214,7 @@ static void pxa2xx_mmci_wakequeues(PXA2xxMMCIState *s)
pxa2xx_mmci_fifo_update(s);
}
static uint32_t pxa2xx_mmci_read(void *opaque, hwaddr offset)
static uint64_t pxa2xx_mmci_read(void *opaque, hwaddr offset, unsigned size)
{
PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
uint32_t ret;
......@@ -257,8 +256,8 @@ static uint32_t pxa2xx_mmci_read(void *opaque, hwaddr offset)
return 0;
case MMC_RXFIFO:
ret = 0;
while (s->ac_width -- && s->rx_len) {
ret |= s->rx_fifo[s->rx_start ++] << (s->ac_width << 3);
while (size-- && s->rx_len) {
ret |= s->rx_fifo[s->rx_start++] << (size << 3);
s->rx_start &= 0x1f;
s->rx_len --;
}
......@@ -277,7 +276,7 @@ static uint32_t pxa2xx_mmci_read(void *opaque, hwaddr offset)
}
static void pxa2xx_mmci_write(void *opaque,
hwaddr offset, uint32_t value)
hwaddr offset, uint64_t value, unsigned size)
{
PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
......@@ -370,9 +369,9 @@ static void pxa2xx_mmci_write(void *opaque,
break;
case MMC_TXFIFO:
while (s->ac_width -- && s->tx_len < 0x20)
while (size-- && s->tx_len < 0x20)
s->tx_fifo[(s->tx_start + (s->tx_len ++)) & 0x1f] =
(value >> (s->ac_width << 3)) & 0xff;
(value >> (size << 3)) & 0xff;
s->intreq &= ~INT_TXFIFO_REQ;
pxa2xx_mmci_fifo_update(s);
break;
......@@ -386,60 +385,9 @@ static void pxa2xx_mmci_write(void *opaque,
}
}
static uint32_t pxa2xx_mmci_readb(void *opaque, hwaddr offset)
{
PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
s->ac_width = 1;
return pxa2xx_mmci_read(opaque, offset);
}
static uint32_t pxa2xx_mmci_readh(void *opaque, hwaddr offset)
{
PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
s->ac_width = 2;
return pxa2xx_mmci_read(opaque, offset);
}
static uint32_t pxa2xx_mmci_readw(void *opaque, hwaddr offset)
{
PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
s->ac_width = 4;
return pxa2xx_mmci_read(opaque, offset);
}
static void pxa2xx_mmci_writeb(void *opaque,
hwaddr offset, uint32_t value)
{
PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
s->ac_width = 1;
pxa2xx_mmci_write(opaque, offset, value);
}
static void pxa2xx_mmci_writeh(void *opaque,
hwaddr offset, uint32_t value)
{
PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
s->ac_width = 2;
pxa2xx_mmci_write(opaque, offset, value);
}
static void pxa2xx_mmci_writew(void *opaque,
hwaddr offset, uint32_t value)
{
PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
s->ac_width = 4;
pxa2xx_mmci_write(opaque, offset, value);
}
static const MemoryRegionOps pxa2xx_mmci_ops = {
.old_mmio = {
.read = { pxa2xx_mmci_readb,
pxa2xx_mmci_readh,
pxa2xx_mmci_readw, },
.write = { pxa2xx_mmci_writeb,
pxa2xx_mmci_writeh,
pxa2xx_mmci_writew, },
},
.read = pxa2xx_mmci_read,
.write = pxa2xx_mmci_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册