Before the qapi conversion, the sendkey command could be used to
send key codes in hex directly to the guest. In HMP, this would
be like:

 (qemu) sendkey 0xdc

However, the qapi conversion broke this, as it only supports sending
QKeyCode values to the guest. That's a regression.

This commit fixes the problem by adding hex value support down
the QMP interface, qmp_send_key().

In more detail, this commit:

 1. Adds the KeyValue union. This can represent an hex value or
    a QKeyCode value

 2. *Changes* the QMP send-key command to take an KeyValue argument
    instead of a QKeyCode one

 3. Adapt hmp_send_key() to the QMP interface changes

Item 2 is an incompatible change, but as we're in development phase
(and this command has been merged a few weeks ago) this shouldn't be
a problem.

Finally, it's not possible to split this commit without breaking the
build.
Reported-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Today, it's necessary to specify the protocol you want to use
when dumping the guest memory, for example:

 (qemu) dump-guest-memory file:/tmp/guest-memory

This has a few issues:

 1. It's cumbersome to type
 2. We loose file path autocompletion
 3. Being able to specify fd:X in HMP makes little sense for humans

Because of these reasons, hardcode the 'protocol' argument to
'file:' in HMP.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Next commits will update devices to propagate errors.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Convert 'sendkey' to use QAPI.

QAPI passes key's index of mapping table to qmp_send_key(),
not keycode. So we use help functions to convert key/code to
index of key_defs, and 'index' will be converted to 'keycode'
inside qmp_send_key().

For qmp, QAPI would check invalid key and raise error.
For hmp, invalid key is checked in hmp_send_key().

'send-key' of QMP doesn't support key in hexadecimal format.
Signed-off-by: NAmos Kong <akong@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

The flag is 'true' when spice migration has completed on the src side.
It is needed for a case where libvirt dies before migration completes
and it misses the event QEVENT_SPICE_MIGRATE_COMPLETED.
When libvirt is restored and queries the migration status, it also needs
to query spice and check if its migration has completed.
Signed-off-by: NYonit Halperin <yhalperi@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

The error_is_type() function is going to be dropped.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

It's not needed. As the device name is already known, we can replace
the duplicated password prompting code by monitor_read_block_device_key().

This overly simplifies hmp_change().
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

This commit changes hmp_cont() to loop through all block devices
and proactively set an encryption key for any encrypted device
missing a key.

This change is needed because QERR_DEVICE_ENCRYPTED is going to be
dropped by a future commit.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Signed-off-by: NBenoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: NPetter Svard <petters@cs.umu.se>
Signed-off-by: NAidan Shribman <aidan.shribman@sap.com>
Signed-off-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NBenoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: NPetter Svard <petters@cs.umu.se>
Signed-off-by: NAidan Shribman <aidan.shribman@sap.com>
Signed-off-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Change XBZRLE cache size in bytes (the size should be a power of 2, it will be
rounded down to the nearest power of 2).
If XBZRLE cache size is too small there will be many cache miss.

New query-migrate-cache-size QMP command and 'info migrate_cache_size' HMP
command to query cache value.
Signed-off-by: NBenoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: NPetter Svard <petters@cs.umu.se>
Signed-off-by: NAidan Shribman <aidan.shribman@sap.com>
Signed-off-by: NOrit Wasserman <owasserm@redhat.com>
Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

The management can enable/disable a capability for the next migration by using
migrate-set-capabilities QMP command.
The user can use migrate_set_capability HMP command.
Signed-off-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

The management can query the current migration capabilities using
query-migrate-capabilities QMP command.
The user can use 'info migrate_capabilities' HMP command.
Currently only XBZRLE capability is available.
Signed-off-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NBenoit Canet <benoit@irqsave.net>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NCorey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

We add time spent for migration to the output of "info migrate"
command.  'total_time' means time since the start fo migration if
migration is 'active', and total time of migration if migration is
completed.  As we are also interested in transferred ram when
migration completes, adding all ram statistics
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This is needed to get file descriptors from SCM_RIGHTS.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: NLaszlo Ersek <lersek@redhat.com>

This is not a full QAPI conversion, but an intermediate step.

In essence, do_netdev_add() is split into three functions:

 1. netdev_add(): performs the actual work. This function is fully
    converted to Error (thus, it's "qapi-friendly")

 2. qmp_netdev_add(): the QMP front-end for netdev_add(). This is
    coded by hand and not auto-generated (gen=no in the schema). The
    reason for this it's a lot easier and simpler to with QemuOpts
    this way

 3. hmp_netdev_add(): HMP front-end.

This design was suggested by Paolo Bonzini.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: NLaszlo Ersek <lersek@redhat.com>

The command's usage:
   dump-guest-memory [-p] protocol [begin] [length]
The supported protocol can be file or fd:
1. file: the protocol starts with "file:", and the following string is
   the file's path.
2. fd: the protocol starts with "fd:", and the following string is the
   fd's name.

Note:
  1. If you want to use gdb to process the core, please specify -p option.
     The reason why the -p option is not default is:
       a. guest machine in a catastrophic state can have corrupted memory,
          which we cannot trust.
       b. The guest machine can be in read-mode even if paging is enabled.
          For example: the guest machine uses ACPI to sleep, and ACPI sleep
          state goes in real-mode.
  2. If you don't want to dump all guest's memory, please specify the start
     physical address and the length.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

The change of the argument name from value to speed was not propagated there.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add mouse_mode, either server or mouse, to qmp and hmp commands, based
on spice_server_is_server_mouse added in spice-server 0.10.3.
Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Allow streaming operations to be started with an initial speed limit.
This eliminates the window of time between starting streaming and
issuing block-job-set-speed.  Users should use the new optional 'speed'
parameter instead so that speed limits are in effect immediately when
the job starts.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

The migrate command is one of those commands where HMP and QMP completely
mix up together. This made the conversion to the QAPI (which separates the
command into QMP and HMP parts) a bit difficult.

The first important change to be noticed is that this commit completes the
removal of the Monitor object from migration code, started by the previous
commit.

Another important and tricky change is about supporting the non-detached
mode. That is, if the user doesn't pass '-d' the migrate command will lock
the monitor and will only release it when migration is finished.

To support this in the new HMP command (hmp_migrate()), it is necessary
to create a timer which runs every second and checks if the migration is
still active. If it is, the timer callback will re-schedule itself to run
one second in the future. If the migration has already finished, the
monitor lock is released and the user can use it normally.

All these changes should be transparent to the user.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Simplify the blockdev-snapshot-sync code and gain failsafe operation
by turning it into a wrapper around the new transaction command.  A new
option is also added matching "mode".
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds the system_wakeup monitor command which will simply
wake up suspended guests.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add query-block-jobs, which shows the progress of ongoing block device
operations.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add block_job_cancel, which stops an active block streaming operation.
When the operation has been cancelled the new BLOCK_JOB_CANCELLED event
is emitted.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add block_job_set_speed, which sets the maximum speed for a background
block operation.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add the block_stream command, which starts copy backing file contents
into the image file.  Also add the BLOCK_JOB_COMPLETED QMP event which
is emitted when image streaming completes.  Later patches add control
over the background copy speed, cancelation, and querying running
streaming operations.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

All files under GPLv2 will get GPLv2+ changes starting tomorrow.
event_notifier.c and exec-obsolete.h were only ever touched by Red Hat
employees and can be relicensed now.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Remember the original PciInfoList in info_list and use
the info variable to traverse the list.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>