This patch adds support for Milkymist's minimal Ethernet MAC v2. It
superseds minimac1.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Trace events cannot use %s in their format strings because trace
backends vary in how they can deference pointers (if at all).  Recording
const char * values is not meaningful if their contents are not recorded
too.

Change grlib trace events that rely on strings so that they communicate
similar information without using strings.

A follow-up patch explains this limitation and updates docs/tracing.txt.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

It can be handy to know when the guest locks/unlocks the CD-ROM tray.
This trace event makes that possible.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds support for Milkymist's VGA framebuffer.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's simple UART.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's texture mapping unit. For fast
computation this model needs hardware accelerated 3D graphics support
(OpenGL). There is no graphical output, all computations belong to internal
framebuffers only.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's System Controller core. The model
has the following features:
 - support for shutting down and restarting the board
 - provide two timers and GPIO
 - provide registers for system identification and reading the boards
   capabilities
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's SoftUSB core. This model differ
from the real hardware in its functionality. The real hardware consits of a
tiny freely programmable microcontroller which controls the USB ports. For
simplicity reasons, this model emulates only keyboard and mouse input
devices, eg. input events translates directly to the corresponding expected
messages.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's Programmable FPU.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's minimal Ethernet MAC.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's memory card core.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for the Milkymist's High Performance Dynamic Memory
Controller. This is just a dumb model without any functionality. While the
real hardware acts for example as a bridge between software and hardware
for sending SDRAM commans, this model will only eat up these commands and
always returns the expected hardware states, eg. PLL locked etc.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for the Milkymist AC97 compatible sound output and
input core.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds paio_complete() and paio_cancel() trace events to
complement the paio_submit() event.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Add a trace event for bdrv_aio_flush() to complement the existing
bdrv_aio_readv() and bdrv_aio_writev() events.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

This patch add support for a system control block. It is supposed to
act as helper for the emulated program. E.g. shutting down the VM or
printing test results. This model is intended for testing purposes only and
doesn't fit to any real hardware. Therefore, it is not added to any board
by default. Instead a user has to add it explicitly with the '-device'
commandline parameter.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch add support for the LatticeMico32 UART.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for the LatticeMico32 system timer.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds the JTAG UART model. It is accessed through special control
registers and opcodes. Therefore the translation uses callbacks to this
model.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds the interrupt controller of the lm32. Because the PIC is
accessed through special control registers and opcodes, there are callbacks
from the lm32 translation code to this model.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Leon3 is an open-source VHDL System-On-Chip, well known in space industry (more
information on http://www.gaisler.com).

Leon3 is made of multiple components available in the GrLib VHDL library.
Three devices are implemented: uart, timers and IRQ manager.
You can find code for these peripherals in the grlib_* files.
Signed-off-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This device exposes one parameter:
 - chardev (ptr) : Pointer to a qemu character device

Emulation of GrLib devices is base on the GRLIB IP Core User's Manual:
http://www.gaisler.com/products/grlib/grip.pdfSigned-off-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This device exposes two parameters:
 - set_pil_in        (ptr) : A function to set the pil_in of the SPARC CPU
 - set_pil_in_opaque (ptr) : Opaque argument of the set_pil_in function

Emulation of GrLib devices is base on the GRLIB IP Core User's Manual:
http://www.gaisler.com/products/grlib/grip.pdfSigned-off-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This device exposes three parameters:
 - frequency (uint32) : The system frequency
 - irq-line  (uint32) : IRQ line number for the first timer
                        (others use irq-line + 1, irq-line + 2...)
 - nr-timers (uint32) : Number of timers

Emulation of GrLib devices is base on the GRLIB IP Core User's Manual:
http://www.gaisler.com/products/grlib/grip.pdfSigned-off-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Adding a chardev backend for spice, where spice determines what
to do with it based on the name attribute given during chardev creation.
For usage by spice vdagent in conjunction with a properly named
virtio-serial device, and future smartcard channel usage.

Example usage:
 qemu -device virtio-serial -chardev spicevmc,name=vdagent,id=vdagent \
 -device virtserialport,chardev=vdagent,name=com.redhat.spice.0

v4->v5:
 * add tracing events
 * fix missing comma
 * fix help string to show debug is optional

v3->v4:
 * updated commit message

v1->v3 changes: (v2 had a wrong commit message)
 * removed spice-qemu-char.h, folded into ui/qemu-spice.h
 * removed dead IOCTL code
 * removed comment
 * removed ifdef CONFIG_SPICE from qemu-config.c and qemu-options.hx help.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add support for device_qualifier and other_speed_config descriptors.
These are used to query the "other speed" configuration of usb 2.0
devices, i.e. in high-speed mode they return the full-speed
configuration and visa versa.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch moves setting and clearing the remote_wakeup feature
bit (via USB_REQ_{SET,CLEAR}_FEATURE) to common code.  Also
USB_REQ_GET_STATUS handling is moved to common code.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch adds fields to the USBDevice struct for the current
speed (hard-wired to full speed for now) and current device
configuration.  Also a init function is added which inializes
these fields.  This allows USB_REQ_{GET,SET}_CONFIGURATION
handling to be moved to common code.

For most drivers the conversion is trivial ad they support a single
configuration only anyway.  One exception is bluetooth where some
device-specific setup code runs after get/set configuration.  The
other is usb-net which actually has two configurations so the
the code to check for the active configuration has been adapted.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

USB_REQ_SET_ADDRESS handling is identical in *all* emulated devices.
Move it to common code.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch adds hw/usb-desc.[ch] files.  They carry data structures
for various usb descriptors and helper functions to generate usb
packets from the structures.

The intention is to have a internal representation of the device
desription which is more usable than the current char array blobs,
so we can have common code handle common usb device emulation using
the device description.

The usage of this infrastructure is optional for usb drivers as there
are cases such as pass-through where it probably isn't very useful.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch implements the read/write state machine.  Operations are
fully asynchronous and multiple operations may be active at any time.

Allocating writes lock tables to ensure metadata updates do not
interfere with each other.  If two allocating writes need to update the
same L2 table they will run sequentially.  If two allocating writes need
to update different L2 tables they will run in parallel.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds code to look up data cluster offsets in the image via
the L1/L2 tables.  The L2 tables are writethrough cached in memory for
performance (each read/write requires a lookup so it is essential to
cache the tables).

With cluster lookup code in place it is possible to implement
bdrv_is_allocated() to query the number of contiguous
allocated/unallocated clusters.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

VM state change notifications are invoked from vm_start()/vm_stop().
Trace these state changes so we can reason about the state of the VM
from trace output.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Replace debug printf statements with tracepoints.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Replace debug printf statements with tracepoints.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Observing block layer aio readv/writev operations is useful for
debugging image formats or understanding guest disk I/O patterns.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

It is not portable to use "%ld" for int64_t because int64_t may have
type long on 64-bit platforms and long long on 32-bit platforms.  Use
the standard library PRId64 macros to keep format strings portable.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

There is no qemu_valloc() but qemu_vmalloc().
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPrerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>