Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

we shouldn't call W*() macros until we check that fork worked.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Remove not needed ret = 0 assignment.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Allow the user to specify the format of the image to rebase.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

These files are created by configure and grow
unnecessarily at each new call of configure:

roms/seabios/config.mak
roms/vgabios/config.mak
libhw32/config.mak
libhw64/config.mak

libhw32/config.mak and libhw64/config.mak set
compiler options, and the wrong old code results
in very long command lines.

The new code always writes a new config.mak
instead of appending to an existing one.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It's emitted whenever the watchdog device's timer expires. The action
taken is provided in the 'data' member.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patch http://permalink.gmane.org/gmane.comp.emulators.qemu/63472 handle
close when using tty devices (like /dev/ttyS0),
yet tty based monitor are not restoring terminal attributes (as done
with stdio based monitor), when closing qemu after that command:
$ qemu -monitor /dev/tty
the terminal is not responding until you write reset (blindly),
this patch fix it
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Use led status notification support in vnc.

The qemu vnc server keeps track of the capslock and numlock states based
on the key presses it receives from the vnc client.  But this fails in
case the guests idea of the capslock and numlock state changes for other
reasons.  One case is guest reboot (+ keyboard reset).  Another case are
more recent windows versions which reset capslock state before
presenting the login screen.

Usually guests use the keyboard leds to signal the capslock and numlock
state to the user, so we can use this to better keep track of capslock
and numlock state in the qemu vnc server.

Also toggle the numlock and capslock states on keydown events (instead
of keyup).  Guests do the same.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add led status notification support to the usb kbd driver.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add led status notification support to the ps/2 kbd driver.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Adds infrastructure for keyboard led status tracking to qemu.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

You're supposed to use scsi-generic for that.  Which rejects anything
but /dev/sg*.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Guest device and host netdev are peers, i.e. it's a 1:1 relation.
However, we fail to enforce that:

    $ qemu -nodefaults --nographic -netdev user,id=net0 -device e1000,netdev=net0 -device virtio-net-pci,netdev=net0 -monitor stdio
    QEMU 0.12.50 monitor - type 'help' for more information
    (qemu) info network
    Devices not on any VLAN:
      net0: net=10.0.2.0, restricted=n peer=virtio-net-pci.0
      e1000.0: model=e1000,macaddr=52:54:00:12:34:56 peer=net0
      virtio-net-pci.0: model=virtio-net-pci,macaddr=52:54:00:12:34:57 peer=net0

It's all downhill from there.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Property "vlan" reports "failed to parse" even when the value parses
just fine, but the result doesn't name an existing VLAN.

Similarly, properties "drive", "chr" and "netdev" misleadingly report
"failed to parse" when the value doesn't name an existing host device.

Change PropertyInfo method parse to return an error code, so that
qdev_prop_parse() can report the error more accurately.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Use the named constant instead of -1.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reported-by: N"Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

net.c used a constant to signify no MSI vectors were specified. Extend
that to all qdev devices.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reported-by: N"Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

According to AMD document 21485D pp.141, APROMWE is bit 8 of BCR2.
Signed-off-by: NChristopher Kilgour <techie@whiterocker.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Want share them with vnc and spice.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NIzik Eidus <ieidus@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Emitted whenever the RTC time changes.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Now we can say it's useful, the following changes have been made:

- Put events in alphabetical order
- Add examples to all events
- Document all 'data' members
- Small corrections and cleanups
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This event has been introduced in the first round of QMP commits,
turns out that it's based on the usage of the EXCP_DEBUG macro,
which has discussable semantics when exposed through QMP.

As libvirt doesn't use this, let's just drop it.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Nothing will change as that function is currently only called by
the main loop code, but it's the right place for the RESET event,
as it's where the reset is actually performed.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

I've introduced the STOP event in the main loop, this is wrong
as it will be only emitted if the io thread is enabled.

This fixes that by moving the STOP event to do_vm_stop().
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The next commit will move the STOP event into do_vm_stop(), to
have the expected event sequence we need to emit the I/O error
event before calling vm_stop().

The expected sequence is:

{ "event": "BLOCK_IO_ERROR" [...] }
{ "event": "STOP" }
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch application failed.  My patch adds a cb() call in
do_balloon(), but the change in git has added the cb() call to
do_info_balloon().  That is causing qemu segfaults.  Applying the
following should correct the damage.  Thanks.

Fix for commit: 5c366a8a

The cb() call is needed in do_balloon(), not do_info_balloon().
Signed-off-by: NAdam Litke <agl@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It might not be obvious what "grab" is.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It has been broken by commit 977b6b91.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

See also 8167ee88,
530e7615 and
fad6cb1a.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Value stored to 'mask' is never read.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Value stored to 'bSign' is never read.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Although the value stored to 'r' is used in the enclosing expression,
the value is never actually read from 'r'.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Value stored during initialization is never read.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Value stored is never read.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Value stored is never read.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

There's a return missing in the srs handling which leads to srs always being
treated an an invalid op.
Signed-off-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The combination of keymap support (-k option) and curses is currently
very broken.  The patch below fixes it by first extending keymap support
to interpret the shift, ctrl, altgr and addupper keywords in keymaps,
and to fix curses into properly using keymaps.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>

The relative URLs do not work when cloning a fork of qemu or when
cloning from the Savannah URL.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>