For ftell we flush the output buffer to ensure that we don't have anything
lingering in our internal buffers. This is a very safe thing to do.

However, with the dynamic size measurement that the dynamic vmstate
description will bring this would turn out quite slow.

Instead, we can fast path this specific measurement and just take the
internal buffers into account when telling the kernel our position.

I'm sure I overlooked some corner cases where this doesn't work, so
instead of tuning the safe, existing version, this patch adds a fast
variant of ftell that gets used by the dynamic vmstate description code
which isn't critical when it fails.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

To support programmatic JSON assembly while keeping the code that generates it
readable, this patch introduces a simple JSON writer. It emits JSON serially
into a buffer in memory.

The nice thing about this writer is its simplicity and low memory overhead.
Unlike the QMP JSON writer, this one does not need to spawn QObjects for every
element it wants to represent.

This is a prerequisite for the migration stream format description generator.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Mostly on the load side, so that when we get a complaint about
a migration failure we can figure out what it didn't like.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Convert a bunch of fprintfs to error_reports
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Commit 22382bb9 renamed the
'hw_cursor_x' and 'hw_cursor_y' fields in cirrus_vga.  Update the static
checker's whitelist to allow matching against the old and new names.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

target-arm queue:
 * refactor/clean up armv7m_init()
 * some initial cleanup in the direction of supporting 64-bit EL3
 * fix broken synchronization of registers between QEMU and KVM
   for 32-bit ARM hosts (which among other things broke memory
   access via gdbstub)
 * fix flush-to-zero handling in FMULX, FRECPS, FRSQRTS and FRECPE
 * don't crash QEMU for UNPREDICTABLE BFI insns in A32 encoding
 * explain why virt board's device-to-transport mapping code is
   the way it is
 * implement mmu_idx values which match the architectural
   distinctions, and introduce the concept of a translation
   regime to get_phys_addr() rather than incorrectly looking
   at the current CPU state
 * update to upstream VIXL 1.7 (gives us correct code addresses
   when dissassembling pc-relative references)
 * sync system register state between KVM and QEMU for 64-bit ARM
 * support virtio on big-endian guests by implementing the
   "which endian is the guest now?" CPU method

# gpg: Signature made Thu 05 Feb 2015 14:02:16 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20150205: (28 commits)
  target-arm: fix for exponent comparison in recpe_f64
  target-arm: Guest cpu endianness determination for virtio KVM ARM/ARM64
  target-arm: KVM64: Get and Sync up guest register state like kvm32.
  disas/arm-a64.cc: Tell libvixl correct code addresses
  disas/libvixl: Update to upstream VIXL 1.7
  target-arm: Fix brace style in reindented code
  target-arm: Reindent ancient page-table-walk code
  target-arm: Use mmu_idx in get_phys_addr()
  target-arm: Pass mmu_idx to get_phys_addr()
  target-arm: Split AArch64 cases out of ats_write()
  target-arm: Don't define any MMU_MODE*_SUFFIXes
  target-arm: Use correct mmu_idx for unprivileged loads and stores
  target-arm: Define correct mmu_idx values and pass them in TB flags
  target-arm/translate-a64: Fix wrong mmu_idx usage for LDT/STT
  target-arm: Make arm_current_el() return sensible values for M profile
  cpu_ldst.h: Allow NB_MMU_MODES to be 7
  hw/arm/virt: explain device-to-transport mapping in create_virtio_devices()
  target-arm: check that LSB <= MSB in BFI instruction
  target-arm: Squash input denormals in FRECPS and FRSQRTS
  Fix FMULX not squashing denormalized inputs when FZ is set.
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

f64 exponent in HELPER(recpe_f64) should be compared to 2045 rather than 1023
(FPRecipEstimate in ARMV8 spec). This fixes incorrect underflow handling when
flushing denormals to zero in the FRECPE instructions operating on 64-bit
values.
Signed-off-by: NIldar Isaev <ild@inbox.ru>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This patch implements a fucntion pointer "virtio_is_big_endian"
from "CPUClass" structure for arm/arm64.
Function arm_cpu_is_big_endian() is added to determine and
return the guest cpu endianness to virtio.
This is required for running cross endian guests with virtio on ARM/ARM64.
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Message-id: 1423130382-18640-3-git-send-email-pranavkumar@linaro.org
[PMM: check CPSR_E in env->cpsr_uncached, not env->pstate.]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This patch adds:
1. Call write_kvmstate_to_list() and write_list_to_cpustate()
   in kvm_arch_get_registers() to sync guest register state.
2. Call write_list_to_kvmstate() in kvm_arch_put_registers()
   to sync guest register state.

These changes are already there for kvm32 in target-arm/kvm32.c.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Message-id: 1423130382-18640-2-git-send-email-pranavkumar@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

disassembling relative branches in code which doesn't reside at
what the guest CPU would think its execution address is. Use
the new MapCodeAddress() API to tell libvixl where the code is
from the guest CPU's point of view so it can get the target
addresses right.

Previous disassembly:

0x0000000040000000:  580000c0      ldr x0, pc+24 (addr 0x7f6cb7020434)
0x0000000040000004:  aa1f03e1      mov x1, xzr
0x0000000040000008:  aa1f03e2      mov x2, xzr
0x000000004000000c:  aa1f03e3      mov x3, xzr
0x0000000040000010:  58000084      ldr x4, pc+16 (addr 0x7f6cb702042c)
0x0000000040000014:  d61f0080      br x4

Fixed disassembly:
0x0000000040000000:  580000c0      ldr x0, pc+24 (addr 0x40000018)
0x0000000040000004:  aa1f03e1      mov x1, xzr
0x0000000040000008:  aa1f03e2      mov x2, xzr
0x000000004000000c:  aa1f03e3      mov x3, xzr
0x0000000040000010:  58000084      ldr x4, pc+16 (addr 0x40000020)
0x0000000040000014:  d61f0080      br x4
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1422274779-13359-3-git-send-email-peter.maydell@linaro.org

Update our copy of libvixl to upstream's 1.7 release.
This includes upstream's fix for the issue we had a local
patch for in commit 94cc44a9.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1422274779-13359-2-git-send-email-peter.maydell@linaro.org

This patch fixes the brace style in the code reindented in the
previous commit.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

A few of the oldest parts of the page-table-walk code have broken indent
(either hardcoded tabs or two-spaces). Reindent these sections.

For ease of review, this patch does not touch the brace style and
so is a whitespace-only change.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Now we have the mmu_idx in get_phys_addr(), use it correctly to
determine the behaviour of virtual to physical address translations,
rather than using just an is_user flag and the current CPU state.

Some TODO comments have been added to indicate where changes will
need to be made to add EL2 and 64-bit EL3 support.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>

Make all the callers of get_phys_addr() pass it the correct
mmu_idx rather than just a simple "is_user" flag. This includes
properly decoding the AT/ATS system instructions; we include the
logic for handling all the opc1/opc2 cases because we'll need
them later for supporting EL2/EL3, even if we don't have the
regdef stanzas yet.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Instead of simply reusing ats_write() as the handler for both AArch32
and AArch64 address translation operations, use a different function
for each with the common code in a third function. This is necessary
because the semantics for selecting the right translation regime are
different; we are only getting away with sharing currently because
we don't support EL2 and only support EL3 in AArch32.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

target-arm doesn't use any of the MMU-mode specific cpu ldst
accessor functions. Suppress their generation by not defining
any of the MMU_MODE*_SUFFIX macros. ("user" and "kernel" are
too simplistic as descriptions of indexes 0 and 1 anyway.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

The MMU index to use for unprivileged loads and stores is more
complicated than we currently implement:
 * for A64, it should be "if at EL1, access as if EL0; otherwise
   access at current EL"
 * for A32/T32, it should be "if EL2, UNPREDICTABLE; otherwise
   access as if at EL0".

In both cases, if we want to make the access for Secure EL0
this is not the same mmu_idx as for Non-Secure EL0.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>

We currently claim that for ARM the mmu_idx should simply be the current
exception level. However this isn't actually correct -- secure EL0 and EL1
should have separate indexes from non-secure EL0 and EL1 since their
VA->PA mappings may differ. We also will want an index for stage 2
translations when we properly support EL2.

Define and document all seven mmu index values that we require, and
pass the mmu index in the TB flags rather than exception level or
priv/user bit.

This change doesn't update the get_phys_addr() code, so our page
table walking still assumes a simplistic "user or priv?" model for
the moment.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
---
This leaves some odd gaps in the TB flags usage. I will circle
back and clean this up later (including moving the other common
flags like the singlestep ones to the top of the flags word),
but I didn't want to bloat this patchseries further.

The LDT/STT (load/store unprivileged) instruction decode was using
the wrong MMU index value. This meant that instead of these insns
being "always access as if user-mode regardless of current privilege"
they were "always access as if kernel-mode regardless of current
privilege". This went unnoticed because AArch64 Linux doesn't use
these instructions.

Cc: qemu-stable@nongnu.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
---
I'm not counting this as a security issue because I'm assuming
nobody treats TCG guests as a security boundary (certainly I
would not recommend doing so...)

Although M profile doesn't have the same concept of exception level
as A profile, it does have a notion of privileged versus not, which
we currently track in the privmode TB flag. Support returning this
information if arm_current_el() is called on an M profile core, so
that we can identify the correct MMU index to use (and put the MMU
index in the TB flags) without having to special-case M profile.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>

Support guest CPUs which need 7 MMU index values.
Add a comment about what would be required to raise the limit
further (trivial for 8, TCG backend rework for 9 or more).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Message-id: 1422592273-4432-1-git-send-email-lersek@redhat.com
[PMM: added note recommending UUIDs]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The documentation states that if LSB > MSB in BFI instruction behaviour
is unpredictable. Currently QEMU crashes because of assertion failure in
this case:

tcg/tcg-op.h:2061: tcg_gen_deposit_i32: Assertion `len <= 32' failed.

While assertion failure may meet the "unpredictable" definition this
behaviour is undesirable because it allows an unprivileged guest program
to crash the emulator with the OS and other programs.

This patch addresses the issue by throwing illegal instruction exception
if LSB > MSB. Only ARM decoder is affected because Thumb decoder already
has this check in place.

To reproduce issue run the following program

int main(void) {
    asm volatile (".long 0x07c00c12" :: );
    return 0;
}

compiled with
  gcc -marm -static badop_arm.c -o badop_arm
Signed-off-by: NKirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The helper functions for FRECPS and FRSQRTS have special case
handling that includes checks for zero inputs, so squash input
denormals if necessary before those checks. This fixes incorrect
output when the FPCR DZ bit is set to enable squashing of input
denormals.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NLaurent Desnogues <laurent.desnogues@gmail.com>

While FMULX returns a 2.0f float when two operators are infinity and
zero, those operators should be unpacked from raw inputs first. Inconsistent
cases would occur when operators are denormalized floats in flush-to-zero
mode. A wrong codepath will be entered and 2.0f will not be returned
without this patch.
Fix by checking whether inputs need to be flushed before running into
different codepaths.
Signed-off-by: NXiangyu Hu <libhu.so@gmail.com>
Message-id: 1422459650-12490-1-git-send-email-libhu.so@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add assertion checking when cpreg structures are registered that they
either forbid raw-access attempts or at least make an attempt at
handling them. Also add an assert in the raw-accessor-of-last-resort,
to avoid silently doing a read or write from offset zero, which is
actually AArch32 CPU register r0.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1422282372-13735-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>

We currently mark ARM coprocessor/system register definitions with
the flag ARM_CP_NO_MIGRATE for two different reasons:
1) register is an alias on to state that's also visible via
   some other register, and that other register is the one
   responsible for migrating the state
2) register is not actually state at all (for instance the TLB
   or cache maintenance operation "registers") and it makes no
   sense to attempt to migrate it or otherwise access the raw state

This works fine for identifying which registers should be ignored
when performing migration, but we also use the same functions for
synchronizing system register state between QEMU and the kernel
when using KVM. In this case we don't want to try to sync state
into registers in category 2, but we do want to sync into registers
in category 1, because the kernel might have picked a different
one of the aliases as its choice for which one to expose for
migration. (In particular, on 32 bit hosts the kernel will
expose the state in the AArch32 version of the register, but
TCG's convention is to mark the AArch64 version as the version
to migrate, even if the CPU being emulated happens to be 32 bit,
so almost all system registers will hit this issue now that we've
added AArch64 system emulation.)

Fix this by splitting the NO_MIGRATE flag in two (ALIAS and NO_RAW)
corresponding to the two different reasons we might not want to
migrate a register. When setting up the TCG list of registers to
migrate we honour both flags; when populating the list from KVM,
only ignore registers which are NO_RAW.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Message-id: 1422282372-13735-2-git-send-email-peter.maydell@linaro.org
[PMM: changed ARM_CP_NO_MIGRATE to ARM_CP_ALIAS on new SP_EL1 and
 SP_EL2 reginfo stanzas since there was a (semantic) merge conflict
 with the patchset that added those]

Added CP register definitions for SP_EL1 and SP_EL2.
Signed-off-by: NGreg Bellows <greg.bellows@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1422029835-4696-5-git-send-email-greg.bellows@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Update to arm_cpu_reset() to reset into the highest available exception level
based on the set ARM features.
Signed-off-by: NGreg Bellows <greg.bellows@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1422029835-4696-4-git-send-email-greg.bellows@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Added RVBAR_EL2 and RVBAR_EL3 CP register support.  All RVBAR_EL# registers
point to the same location and only the highest EL version exists at any one
time.
Signed-off-by: NGreg Bellows <greg.bellows@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1422029835-4696-3-git-send-email-greg.bellows@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix the RVBAR_EL1 CP register opc2 encoding from 2 to 1
Signed-off-by: NGreg Bellows <greg.bellows@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1422029835-4696-2-git-send-email-greg.bellows@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This patch allows the board to specifiy the number of NVIC interrupt
lines when using armv7m_init.
Signed-off-by: NAlistair Francis <alistair23@gmail.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5a0b0fcc778df0340899f488053acc9493679e03.1422077994.git.alistair23@gmail.com
[PMM: removed stale FIXME comment]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This patch moves the memory region init code from the
armv7m_init function to the stellaris_init function
Signed-off-by: NAlistair Francis <alistair23@gmail.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 4836be7e1d708554d6eb0bc639dc2fbf7dac0458.1422077994.git.alistair23@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

qmp hmp balloon: Cleanups around error reporting

# gpg: Signature made Thu 05 Feb 2015 07:15:11 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"

* remotes/armbru/tags/pull-error-2015-02-05:
  balloon: Eliminate silly QERR_ macros
  balloon: Factor out common "is balloon active" test
  balloon: Inline qemu_balloon(), qemu_balloon_status()
  qmp: Eliminate silly QERR_COMMAND_NOT_FOUND macro
  qmp: Simplify recognition of capability negotiation command
  qmp: Clean up qmp_query_spice() #ifndef !CONFIG_SPICE dummy
  hmp: Compile hmp_info_spice() only with CONFIG_SPICE
  qmp hmp: Improve error messages when SPICE is not in use
  qmp hmp: Factor out common "using spice" test
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

VFIO fixes:
- Fix wrong initializer (Chen Fan)
- Add missing object_unparent (Alex Williamson)

# gpg: Signature made Wed 04 Feb 2015 18:49:24 GMT using RSA key ID 3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg:                 aka "Alex Williamson <alex@shazbot.org>"
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>"
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>"

* remotes/awilliam/tags/vfio-update-20150204.0:
  vfio-pci: Fix missing unparent of dynamically allocated MemoryRegion
  vfio: fix wrong initialize vfio_group_list
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Commit d8d95814 added explicit object_unparent() calls for
dynamically allocated MemoryRegions.  The VFIOMSIXInfo structure also
contains such a MemoryRegion, covering the mmap'd region of a PCI BAR
above the MSI-X table.  This structure is freed as part of the class
exit function and therefore also needs an explicit object_unparent().
Failing to do this results in random segfaults due to fields within
the structure, often the class pointer, being reclaimed and corrupted
by the time object_finalize_child_property() is called for the object.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org # 2.2

Signed-off-by: NChen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

s390 translator bug fixes

# gpg: Signature made Tue 03 Feb 2015 20:39:15 GMT using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-tg-s390-20150203:
  target-s390x: fix and optimize slb* and slbg* computation of carry/borrow flag
  target-s390x: support OC and NC in the EX instruction
  disas/s390.c: Remove unused variables
  target-s390x: Mark check_privileged() as !CONFIG_USER_ONLY
  target-s390: Implement ECAG
  target-s390: Implement LURA, LURAG, STURG
  target-s390: Fix STURA
  target-s390: Fix STIDP
  target-s390: Implement EPSW
  target-s390: Implement SAM specification exception
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>