Speaker init has been added in 506b7ddf,
but audio subsystem init was missing.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>

Keep the PC values as defaults but allow to override them for PReP.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

This fixes a crash in PReP emulation when using DMA controller to access
floppy drive.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>

This patch fixes a build regression with MinGW which was introduced by
commit 7c7db755.

The 3rd argument of g_main_context_query must point to a gint value.
Using a pointer to an uint32_t value is wrong.

The timeout argument of function os_host_main_loop_wait was never
used for w32 / w64.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fixes the build when combined with the drop of darwin-user.
Enthusiasts can still try building it using --enable-bsd-user.
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Cc: Bernhard Walle <bernhard@bwalle.de>
Tested-by: Bernhard Walle <bernhard@bwalle.de> [Mac OS 10.7.3]
Acked-by: NBernhard Walle <bernhard@bwalle.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Based on the following Coccinelle patch:

@@
typedef int16, int_fast16_t;
@@
-int16
+int_fast16_t

Avoids a workaround for AIX.

Add typedef for pre-10 Solaris.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Cc: malc <av1474@comtv.ru>
Cc: Ben Taylor <bentaylor.solx86@gmail.com>
Tested-by: NBernhard Walle <bernhard@bwalle.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Based on the following Coccinelle patch:

@@
typedef uint16, uint_fast16_t;
@@
-uint16
+uint_fast16_t

Fixes the build of the Cocoa frontend on Mac OS X and avoids a
workaround for AIX.

For pre-10 Solaris include osdep.h.
Reported-by: NPavel Borzenkov <pavel.borzenkov@gmail.com>
Reported-by: NRui Carmo <rui.carmo@gmail.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Cc: Juan Pineda <juan@logician.com>
Cc: malc <av1474@comtv.ru>
Cc: Ben Taylor <bentaylor.solx86@gmail.com>
Tested-by: NBernhard Walle <bernhard@bwalle.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

osdep.h is included via qemu-common.h.

Prepares for use of [u]int_fast*_t types in softfloat code.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Cc: Ben Taylor <bentaylor.solx86@gmail.com>
Cc: Aurélien Jarno <aurelien@aurel32.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Tested-by: NBernhard Walle <bernhard@bwalle.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

normalizeFloat{32,64}Subnormal() expect the exponent as int16, not int.
This went unnoticed since int16 and uint16 were both typedef'ed to int.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NBernhard Walle <bernhard@bwalle.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
  target-arm: Make SETEND respect bswap_code (BE8) setting
  target-arm: Move A9 config_base_address reset value to ARMCPU
  target-arm: Change cpu_arm_init() return type to ARMCPU

* 'timer' of git://qemu.weilnetz.de/qemu:
  qemu-timer: Optimize data structures
  qemu-timer: Remove function alarm_has_dynticks
  qemu-timer: Use bool, false, true for boolean values
  qemu-timer: Remove unused function qemu_alarm_pending
  qemu-timer: Remove redundant include statements

* qmp/queue/qmp:
  qapi: fix qmp_balloon() conversion
  qemu-iotests: add block-stream speed value test case
  block: add 'speed' optional parameter to block-stream
  block: change block-job-set-speed argument from 'value' to 'speed'
  block: use Error mechanism instead of -errno for block_job_set_speed()
  block: use Error mechanism instead of -errno for block_job_create()

Commit d72f3264 forgot to convert a call from qerror_report() to
error_set(). Fix it.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Add tests to exercise the InvalidParameter 'speed' error code path, as
well as the regular success case for setting the speed.  The
block-stream 'speed' parameter allows the speed limit of the job to be
applied immediately when the job starts instead of issuing a separate
block-job-set-speed command later.  If the parameter has an invalid
value we expect to get an error and the job is not created.

It turns out that cancelling a block job is a common operation in these
test cases, let's extract a cancel_and_wait() function instead of
duplicating the QMP commands.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Allow streaming operations to be started with an initial speed limit.
This eliminates the window of time between starting streaming and
issuing block-job-set-speed.  Users should use the new optional 'speed'
parameter instead so that speed limits are in effect immediately when
the job starts.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

There are at least two different errors that can occur in
block_job_set_speed(): the job might not support setting speeds or the
value might be invalid.

Use the Error mechanism to report the error where it occurs.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

The block job API uses -errno return values internally and we convert
these to Error in the QMP functions.  This is ugly because the Error
should be created at the point where we still have all the relevant
information.  More importantly, it is hard to add new error cases to
this case since we quickly run out of -errno values without losing
information.

Go ahead and use Error directly and don't convert later.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Make the SETEND instruction respect the setting of bswap_code,
so that in BE8 mode we UNDEF for attempts to switch into
little-endian mode and nop for attempts to stay in big-endian
mode. (This is the inverse of the existing handling of SETEND
in the more common little-endian setup, which we use since
we don't implement the architecturally-mandated dynamic
endianness switching.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Move the A9 config_base_address cp15 register reset value to
ARMCPU. This should become a QOM property so that the Highbank
board can set it without having to pull in cpu-qom.h, but at
least this avoids the implicit dependency on reset ordering
that the previous workaround had.

Cc: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Make cpu_arm_init() return a QOM ARMCPU, so that we don't need to
obtain an ARMCPU through arm_env_get_cpu() in machine init code.
This requires to adjust the inclusion site of cpu-qom.h and in turn,
forward-looking, to homogenize its include order.

cpu_init() must still return a CPUARMState for backwards and
cross-target compatibility, so adjust the cpu_init macro.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Remove all holes which were found by pahole on Linux x86_64
(and replace "struct QEMUTimer" by "QEMUTimer").
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Weil <sw@weilnetz.de>

Some time ago, the last time which did not have dynticks was removed,
so now all timers have dynticks.

I also removed a misleading error message for the dynticks timer.
If timer_create fails, there is already an error message, and
QEMU will use the unix timer which also provides dynamic ticks,
therefore dynamic ticks are not disabled.

v2:
Remove two if statements because they were always true
(thanks to Paolo Bonzini for this correction).
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Weil <sw@weilnetz.de>

This avoids conversions between int and bool / char.

It also makes the code more readable.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Weil <sw@weilnetz.de>

The last user of this function was removed by commit
12d4536f.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Weil <sw@weilnetz.de>

qemu-timer.h includes qemu-common.h which already includes time.h,
sys/time.h, windows.h, unistd.h, fcntl.h, errno.h and signal.h.

Therefore those include statements are redundant and can be removed.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Weil <sw@weilnetz.de>

* bonzini/nbd-next:
  nbd: Fix uninitialised use of s->sock

* kraxel/usb.49:
  usb-uhci: update irq line on reset
  usb: add serial number generator
  usb-redir: Not finding an async urb id is not an error
  usb-redir: Reset device address and speed on disconnect
  usb-redir: An interface count of 0 is a valid value
  usb-xhci: fix bit test
  usb-xhci: Use PCI DMA helper functions
  usb-host: fix zero-length packets
  usb-host: don't dereference invalid iovecs
  usb-storage: fix request canceling
  usb-ehci: Ensure frindex writes leave a valid frindex value
  usb-ehci: add missing usb_packet_init() call
  usb-ehci: remove hack

* stefanha/tracing:
  Beautify makefile commands for generation of files with tracetool
  Generic elimination of auto-generated files

* mst/tags/for_anthony:
  e1000: set E1000_ICR_INT_ASSERTED only for 8257x
  e1000: link auto-negotiation emulation
  e1000: introduce bit for debugging PHY emulation
  e1000: introduce helpers to manipulate link status
  e1000: PHY loopback mode support
  e1000: conditionally raise irq at the end of MDI cycle
  e1000: introduce bits of PHY control register
  eepro100: Fix multicast regression
  virtio: order index/descriptor reads
  virtio: add missing mb() on enable notification
  virtio: add missing mb() on notification
  e1000: move reset function earlier in file

* afaerber/qom-cpu-x86-prop.v3:
  target-i386: Introduce "tsc-frequency" property for X86CPU
  target-i386: Prepare "vendor" property for X86CPU
  target-i386: Introduce "xlevel" property for X86CPU
  target-i386: Introduce "level" property for X86CPU
  target-i386: Add property getter for CPU model-id
  target-i386: Add property getter for CPU stepping
  target-i386: Add property getter for CPU model
  target-i386: Add property getter for CPU family
  target-i386: Add "model-id" property to X86CPU
  target-i386: Add "stepping" property to X86CPU
  target-i386: Add "model" property to X86CPU
  target-i386: Add "family" property to X86CPU
  target-i386: Add range check for -cpu ,family=x
  target-i386: Pass X86CPU to cpu_x86_register()
  target-i386: Fix x86_cpuid_set_model_id()

* amit/master:
  virtio-serial-bus: Unset guest_connected at reset and driver reset
  virtio-serial-bus: fix guest_connected init before driver init

This reverts commit d10f9056 due to a build
breakage.

See http://spunk.home.kraxel.org/bb/builders/ubuntu-default/builds/52Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add an include for a header required to build on recent FreeBSD.
Signed-off-by: NNathan Whitehorn <nwhitehorn@freebsd.org>
Signed-off-by: NAndreas Frber <andreas.faerber@web.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

- remove qemu_calculate_timeout;

- explicitly size timeout to uint32_t;

- introduce slirp_update_timeout;

- pass NULL as timeout argument to select in case timeout is the maximum
value;
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: NPaul Brook <paul@codesourcery.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Also delta in qemu_next_alarm_deadline is a 64 bit value so set the
default to INT64_MAX instead of INT32_MAX.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fix win32_rearm_timer and mm_rearm_timer: they should be able to handle
INT64_MAX as a delta parameter without overflowing.
Also, the next deadline in ms should be calculated rounding down rather
than up (see unix_rearm_timer and dynticks_rearm_timer).

Finally ChangeTimerQueueTimer takes an unsigned long and timeSetEvent
takes an unsigned int as delta, so cast the ms delta to the appropriate
unsigned integer.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Don't assume zeroed cpuid_model[] fields.

This didn't break anything yet but QOM properties should be able to set
the value to something else without setting an intermediate zero string.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

After adding GCC_FMT_ATTR to qtest_sendf, more format errors are reported
by the compiler. These are fixed here.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>