提交 506b7ddf 编写于 作者: A Andreas Färber

prep: Use i82378 PCI->ISA bridge for 'prep' machine

Speaker I/O, ISA bus, i8259 PIC, RTC and DMA are no longer set up
individually by the machine. Effectively, no-op speaker I/O is replaced
by pcspk; PIT and i82374 DMA are introduced.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>

Remove related dead, alternative code.
Wire up PCI host bridge IRQs via GPIO-in IRQs of PCI->ISA bridge.
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Cc: Alexander Graf <agraf@suse.de>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
上级 a04ff940
......@@ -83,37 +83,9 @@ static const int ide_irq[2] = { 13, 13 };
static uint32_t ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, 0x280, 0x380 };
static int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 };
//static ISADevice *pit;
/* ISA IO ports bridge */
#define PPC_IO_BASE 0x80000000
#if 0
/* Speaker port 0x61 */
static int speaker_data_on;
static int dummy_refresh_clock;
#endif
static void speaker_ioport_write (void *opaque, uint32_t addr, uint32_t val)
{
#if 0
speaker_data_on = (val >> 1) & 1;
pit_set_gate(pit, 2, val & 1);
#endif
}
static uint32_t speaker_ioport_read (void *opaque, uint32_t addr)
{
#if 0
int out;
out = pit_get_out(pit, 2, qemu_get_clock_ns(vm_clock));
dummy_refresh_clock ^= 1;
return (speaker_data_on << 1) | pit_get_gate(pit, 2) | (out << 5) |
(dummy_refresh_clock << 4);
#endif
return 0;
}
/* PCI intack register */
/* Read-only register (?) */
static void PPC_intack_write (void *opaque, target_phys_addr_t addr,
......@@ -526,8 +498,8 @@ static void ppc_prep_init (ram_addr_t ram_size,
SysBusDevice *sys;
PCIHostState *pcihost;
PCIBus *pci_bus;
PCIDevice *pci;
ISABus *isa_bus;
qemu_irq *i8259;
qemu_irq *cpu_exit_irq;
int ppc_boot_device;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
......@@ -629,13 +601,9 @@ static void ppc_prep_init (ram_addr_t ram_size,
}
}
isa_mem_base = 0xc0000000;
if (PPC_INPUT(env) != PPC_FLAGS_INPUT_6xx) {
hw_error("Only 6xx bus is supported on PREP machine\n");
}
/* Hmm, prep has no pci-isa bridge ??? */
isa_bus = isa_bus_new(NULL, get_system_io());
i8259 = i8259_init(isa_bus, first_cpu->irq_inputs[PPC6xx_INPUT_INT]);
dev = qdev_create(NULL, "raven-pcihost");
sys = sysbus_from_qdev(dev);
......@@ -648,13 +616,19 @@ static void ppc_prep_init (ram_addr_t ram_size,
fprintf(stderr, "Couldn't create PCI host controller.\n");
exit(1);
}
sysbus_connect_irq(&pcihost->busdev, 0, i8259[9]);
sysbus_connect_irq(&pcihost->busdev, 1, i8259[11]);
sysbus_connect_irq(&pcihost->busdev, 2, i8259[9]);
sysbus_connect_irq(&pcihost->busdev, 3, i8259[11]);
isa_bus_irqs(isa_bus, i8259);
// pci_bus = i440fx_init();
/* PCI -> ISA bridge */
pci = pci_create_simple(pci_bus, PCI_DEVFN(1, 0), "i82378");
cpu_exit_irq = qemu_allocate_irqs(cpu_request_exit, NULL, 1);
qdev_connect_gpio_out(&pci->qdev, 0,
first_cpu->irq_inputs[PPC6xx_INPUT_INT]);
qdev_connect_gpio_out(&pci->qdev, 1, *cpu_exit_irq);
sysbus_connect_irq(&pcihost->busdev, 0, qdev_get_gpio_in(&pci->qdev, 9));
sysbus_connect_irq(&pcihost->busdev, 1, qdev_get_gpio_in(&pci->qdev, 11));
sysbus_connect_irq(&pcihost->busdev, 2, qdev_get_gpio_in(&pci->qdev, 9));
sysbus_connect_irq(&pcihost->busdev, 3, qdev_get_gpio_in(&pci->qdev, 11));
isa_bus = DO_UPCAST(ISABus, qbus, qdev_get_child_bus(&pci->qdev, "isa.0"));
/* Register 8 MB of ISA IO space (needed for non-contiguous map) */
memory_region_init_io(PPC_io_memory, &PPC_prep_io_ops, sysctrl,
"ppc-io", 0x00800000);
......@@ -662,9 +636,6 @@ static void ppc_prep_init (ram_addr_t ram_size,
/* init basic PC hardware */
pci_vga_init(pci_bus);
// openpic = openpic_init(0x00000000, 0xF0000000, 1);
// pit = pit_init(0x40, 0);
rtc_init(isa_bus, 2000, NULL);
if (serial_hds[0])
serial_isa_init(isa_bus, 0, serial_hds[0]);
......@@ -691,9 +662,6 @@ static void ppc_prep_init (ram_addr_t ram_size,
}
isa_create_simple(isa_bus, "i8042");
cpu_exit_irq = qemu_allocate_irqs(cpu_request_exit, NULL, 1);
DMA_init(1, cpu_exit_irq);
// SB16_init();
for(i = 0; i < MAX_FD; i++) {
......@@ -701,9 +669,6 @@ static void ppc_prep_init (ram_addr_t ram_size,
}
fdctrl_init_isa(isa_bus, fd);
/* Register speaker port */
register_ioport_read(0x61, 1, 1, speaker_ioport_read, NULL);
register_ioport_write(0x61, 1, 1, speaker_ioport_write, NULL);
/* Register fake IO ports for PREP */
sysctrl->reset_irq = first_cpu->irq_inputs[PPC6xx_INPUT_HRESET];
register_ioport_read(0x398, 2, 1, &PREP_io_read, sysctrl);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册