- 25 8月, 2011 2 次提交
-
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 22 8月, 2011 2 次提交
-
-
由 Avi Kivity 提交于
This problem with this function is that it is not reversible - it is impossible to know where things are registered and unregister them exactly. As there are no more users, we can remove it. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Avi Kivity 提交于
sysbus_init_mmio_cb() uses the destructive IO_MEM_UNASSIGNED to remove a region. Provide an alternative that calls an unmap callback, so the removal may be done non-destructively. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 21 8月, 2011 1 次提交
-
-
由 Anthony Liguori 提交于
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 29 7月, 2011 1 次提交
-
-
由 Avi Kivity 提交于
Allow registering sysbus device memory using a MemoryRegion. Once all users are converted, sysbus_init_mmio() and sysbus_init_mmio_cb() will be removed. Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 16 4月, 2011 1 次提交
-
-
由 Blue Swirl 提交于
Remove unused sysemu.h include directives to speed up build with the following patches. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 12 2月, 2011 1 次提交
-
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 11 2月, 2011 1 次提交
-
-
由 Dmitry Eremin-Solenikov 提交于
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>
-
- 12 12月, 2010 1 次提交
-
-
由 Gleb Natapov 提交于
Prints out mmio or pio used to access child device. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 02 10月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Fix address truncation in sysbus by using a wider type. Reported-by: NArtyom Tarasenko <atar4qemu@googlemail.com> Tested-by: NAndreas Färber <andreas.faerber@web.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 07 10月, 2009 1 次提交
-
-
由 Markus Armbruster 提交于
Like qdev_init(), but terminate program via hw_error() instead of returning an error value. Use it instead of qdev_init() where terminating the program on failure is okay, either because it's during machine construction, or because we know that failure can't happen. Because relying in the latter is somewhat unclean, and the former is not always obvious, it would be nice to go back to qdev_init() in the not-so-obvious cases, only with proper error handling. I'm leaving that for another day, because it involves making sure that error values are properly checked by all callers. Patchworks-ID: 35168 Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 02 10月, 2009 2 次提交
-
-
由 Anthony Liguori 提交于
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 malc 提交于
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 28 8月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Sorry folks, but it has to be. One more of these invasive qdev patches. We have a serious design bug in the qdev interface: device init callbacks can't signal failure because the init() callback has no return value. This patch fixes it. We have already one case in-tree where this is needed: Try -device virtio-blk-pci (without drive= specified) and watch qemu segfault. This patch fixes it. With usb+scsi being converted to qdev we'll get more devices where the init callback can fail for various reasons. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 01 8月, 2009 1 次提交
-
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 17 7月, 2009 1 次提交
-
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 09 7月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
BusInfo is filled with name and size (pretty much like I did for DeviceInfo as well). There is also a function pointer to print bus-specific device information to the monitor. sysbus is hooked up there, I've also added a print function for PCI. Device creation is slightly modified as well: The device type search loop now also checks the bus type while scanning the list instead of complaining thereafter in case of a mismatch. This effectively gives each bus a private namespace for device names. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
- 11 6月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Rationale: move device information from code to data structures. v2: Adapt the drivers missed in the first version. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 05 6月, 2009 2 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
由 Paul Brook 提交于
Record device property types, and provide a list of properties at device registration time. Add a "device" property type that holds a reference to annother device. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
- 23 5月, 2009 1 次提交
-
-
由 Paul Brook 提交于
Implement and use a common device bus state. The main side-effect is that creating a bus and attaching it to a parent device are no longer separate operations. For legacy code we allow a NULL parent, but that should go away eventually. Also tweak creation code to veriry theat a device in on the right bus. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
- 15 5月, 2009 1 次提交
-
-
由 Paul Brook 提交于
Signed-off-by: NPaul Brook <paul@codesourcery.com>
-