Make gen_compute_eflags_z and gen_compute_eflags_s able to compute the
inverted condition, and use this in gen_setcc_slow_T0.  We cannot do it
yet in gen_compute_eflags_c, but prepare the code for it anyway.  It is
not worthwhile for PF, as usual.

shr+and+xor could be replaced by and+setcond.  I'm not doing it yet.
Reviewed-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

ZF, SF and PF can always be computed from CC_DST except in the
CC_OP_EFLAGS case (and CC_OP_DYNAMIC, which just resolves to CC_OP_EFLAGS
in gen_compute_eflags).  Use setcond to compute ZF and SF.

We could also use a table lookup to compute PF.
Reviewed-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This gets us universal coverage, rather than scattering discards
around at various places.  As a bonus, we do not emit redundant
discards e.g. between sequential logic insns.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This makes code more similar to the other callers of gen_eob, especially
loopz/loopnz/jcxz.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

After calling gen_compute_eflags, leave the computed value in cc_reg_src
and set cc_op to CC_OP_EFLAGS.  The next few patches will remove anyway
most calls to gen_compute_eflags.

As a result of this change it is more natural to remove the register
argument from gen_compute_eflags and change all the callers.
Reviewed-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Introduce new functions to extract PF, SF, OF, ZF in addition to CF.
These provide single entry points for optimizing accesses to a single
flag.
Reviewed-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

All of the conditional calls to gen_op_set_cc_op go away, and
gen_op_set_cc_op itself gets inlined into its only remaining caller.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Use a dirty flag to know whether env->cc_op is up to date,
rather than forcing s->cc_op to DYNAMIC and losing info.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This will provide a good hook into which we can consolidate
all of the cc variable discards.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Before computing flags we need to store the cc_op to memory.  Move this
to gen_compute_eflags_c and gen_compute_eflags rather than doing it all
over the place.

Alo, after computing the flags in cpu_cc_src we are in EFLAGS mode.
Set s->cc_op and discard cpu_cc_dst in gen_compute_eflags, rather than
doing it all over the place.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Discard CC_DST and set s->cc_op immediately after computing EFLAGS.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Always compute EFLAGS first since it is needed whenever
the shift is non-zero, i.e. most of the time.  This makes it possible
to remove some writes of CC_OP_EFLAGS to cpu_cc_op and more importantly
removes cases where s->cc_op becomes CC_OP_DYNAMIC.  Also, we can
remove cc_tmp and just modify cc_src from within the helper.

Finally, always follow gen_compute_eflags(cpu_cc_src) by setting s->cc_op
and discarding cpu_cc_dst.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This ensures the invariant that cpu_cc_op matches s->cc_op when calling
the helpers.  The next patches need this because gen_compute_eflags and
gen_compute_eflags_c will take care of setting cpu_cc_op.

Always compute EFLAGS first since it is needed whenever the shift is
non-zero, i.e. most of the time.  This makes it possible to remove some
writes of CC_OP_EFLAGS to cpu_cc_op and more importantly removes cases
where s->cc_op becomes CC_OP_DYNAMIC.  These are slow and we want to
avoid them: CC_OP_EFLAGS is quite efficient once we paid the initial
cost of computing the flags.

Finally, always follow gen_compute_eflags(cpu_cc_src) by setting s->cc_op
and discarding cpu_cc_dst.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

This ensures the invariant that cpu_cc_op matches s->cc_op when calling
the helpers.  The next patches need this because gen_compute_eflags and
gen_compute_eflags_c will take care of setting cpu_cc_op.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

As in the gen_repz_scas/gen_repz_cmps case, delay setting
CC_OP_DYNAMIC in gen_jcc until after code generation.  All of
gen_jcc1/is_fast_jcc/gen_setcc_slow_T0 now work on s->cc_op, which makes
things a bit easier to follow and to patch.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Set it to the appropriate CC_OP_SUBx constant in gen_scas/gen_cmps.
In the repz case it can be overridden to CC_OP_DYNAMIC after generating
the code.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Introduce a function that abstracts extracting an 8, 16, 32 or 64-bit value
with or without sign, generalizing gen_extu and gen_exts.
Reviewed-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reviewed-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

In my installation of GNU-TLS (v3.0.23) the type
gnutls_anon_server_credentials is marked deprecated, so -Werror
breaks compilation.
Simply replacing it with the newer ..._t version fixed the compilation
on my machine (Slackware 14.0). I cannot tell how far back this "new"
type goes, at least the header file in RHEL 5.0 (v1.4.1) seems to have
it already. If someone finds a broken distribution, tell me and I
insert some compat code.
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Message-id: 1350551818-14717-1-git-send-email-andre.przywara@amd.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Collect them from "Standard options", "File system options", "Virtual
File system pass-through options", "Debug/Expert options".
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-8-git-send-email-armbru@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

--device is under heading "USB options".  --name and --uuid are under
"Virtual File system pass-through options".  Move all three to
"Standard options".
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-7-git-send-email-armbru@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-6-git-send-email-armbru@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

End tables before headings, start new ones afterwards.  Fixes
incorrect indentation of headings "File system options" and "Virtual
File system pass-through options" in manual page and qemu-doc.

Normalize markup some to increase chances it survives future edits.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-5-git-send-email-armbru@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-4-git-send-email-armbru@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-3-git-send-email-armbru@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1360781383-28635-2-git-send-email-armbru@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Prepares for assigning IRQs before QOM realize.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Message-id: 1361010446-1427-1-git-send-email-afaerber@suse.de
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Introduce [qtest_]{read,write}[bwlq]() libqtest functions and
corresponding QTest protocol commands to replace local versions in
libi2c-omap.c.

Also convert m48t59-test's cmos_{read,write}_mmio() to {read,write}b().
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Message-id: 1361051043-27944-4-git-send-email-afaerber@suse.de
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In order to convert qmp() macro to an inline function, expose a
qtest_qmpv() function, reused by qtest_qmp().

We can't apply GCC_FMT_ATTR() since fdc-test is using zero-length format
strings, which would result in warnings treated as errors.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Message-id: 1361051043-27944-3-git-send-email-afaerber@suse.de
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

libqtest.h provides a number of shortcut macros to avoid tests feeding
it the QTestState they operate on. Most of these can easily be turned
into static inline functions, so let's do that for clarity.
This avoids getting off-by-one error messages when passing wrong args.

Some macros had a val argument but documented @value argument. Fix this.

While touching things, enforce gtk-doc markup for return values and for
referencing types.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Message-id: 1361051043-27944-2-git-send-email-afaerber@suse.de
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Andreas Färber
# Via Andreas Färber
* afaerber/qom-cpu: (47 commits)
  target-i386: Split command line parsing out of cpu_x86_register()
  target-i386: Move cpu_x86_init()
  target-lm32: Drop unused cpu_lm32_close() prototype
  target-s390x: Drop unused cpu_s390x_close() prototype
  spapr_hcall: Replace open-coded CPU loop with qemu_get_cpu()
  ppce500_spin: Replace open-coded CPU loop with qemu_get_cpu()
  e500: Replace open-coded loop with qemu_get_cpu()
  cpu: Add CPUArchState pointer to CPUState
  cputlb: Pass CPUState to cpu_unlink_tb()
  cpu: Move current_tb field to CPUState
  cpu: Move exit_request field to CPUState
  cpu: Move running field to CPUState
  cpu: Move host_tid field to CPUState
  target-cris: Introduce CRISCPU subclasses
  target-m68k: Pass M68kCPU to m68k_set_irq_level()
  mcf_intc: Pass M68kCPU to mcf_intc_init()
  mcf5206: Pass M68kCPU to mcf5206_init()
  target-m68k: Return M68kCPU from cpu_m68k_init()
  ppc405_uc: Pass PowerPCCPU to ppc40x_{core,chip,system}_reset()
  target-xtensa: Move TCG initialization to XtensaCPU initfn
  ...

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The new formulation makes better use of add-with-carry type insns
that the host may have.  Use gcc's sign adjustment trick to avoid
having to perform a 128-bit negation.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Replace some x86_64 specific inline assembly with something that
all 64-bit hosts ought to optimize well.  At worst this becomes
a call to the gcc __multi3 routine, which is no worse than our
implementation in util/host-utils.c.

With gcc 4.7, we get identical code generation for x86_64.  We
now get native multiplication on ia64 and s390x hosts.  With minor
improvements to gcc we can get it for ppc64 as well.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Commit 0b0d3320 (TCG: Final globals
clean-up) moved code_gen_prologue but forgot to update ppc code.
This broke the build on 32-bit ppc. ppc64 is unaffected.

Cc: Evgeny Voevodin <evgenyvoevodin@gmail.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>