- 24 10月, 2016 2 次提交
-
-
由 Marc-André Lureau 提交于
qemu_chr_accept_input() and qemu_chr_disconnect() are only used by frontend, so use qemu_chr_fe prefix. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-14-marcandre.lureau@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Marc-André Lureau 提交于
Store the property in a CharBackend instead of CharDriverState*. This also replace systematically chr by chr.chr to access the CharDriverState*. The following patches will replace it with calls to qemu_chr_fe CharBackend functions. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-12-marcandre.lureau@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 14 9月, 2016 1 次提交
-
-
由 Daniel P. Berrange 提交于
The qemu_chr_fe_write method will return -1 on EAGAIN if the chardev backend write would block. Almost no callers of the qemu_chr_fe_write() method check the return value, instead blindly assuming data was successfully sent. In most cases this will lead to silent data loss on interactive consoles, but in some cases (eg RNG EGD) it'll just cause corruption of the protocol being spoken. We unfortunately can't fix the virtio-console code, due to a bug in the Linux guest drivers, which would cause the entire Linux kernel to hang if we delay processing of the incoming data in any way. Fixing this requires first fixing the guest driver to not hold spinlocks while writing to the hvc device backend. Fixes bug: https://bugs.launchpad.net/qemu/+bug/1586756Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Message-Id: <1473170165-540-4-git-send-email-berrange@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 07 6月, 2016 1 次提交
-
-
由 xiaoqiang zhao 提交于
The previous commit e7c91369 (hw/char: QOM'ify escc.c) cause qemu-system-ppc/ppc64 OpenBIOS to freeze on startup, this commit fix it. Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com> Tested-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <1464767898-30526-1-git-send-email-zxq_yx_007@163.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 29 5月, 2016 1 次提交
-
-
由 xiaoqiang zhao 提交于
* Drop the old SysBus init function and use instance_init * Call qemu_chr_add_handlers in the realize callback Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com> Message-Id: <1464158344-12266-2-git-send-email-zxq_yx_007@163.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 18 3月, 2016 1 次提交
-
-
由 Eric Blake 提交于
Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
- 05 3月, 2016 1 次提交
-
-
由 Eric Blake 提交于
An upcoming patch will alter how simple unions, like InputEvent, are laid out, which will impact all lines of the form 'evt->u.XXX' (expanding it to the longer 'evt->u.XXX.data'). For better legibility in that patch, and less need for line wrapping, it's better to use a temporary variable to reduce the effect of a layout change to just the variable initializations, rather than every reference within an InputEvent. There was one instance in hid.c:hid_pointer_event() where the code was referring to evt->u.rel inside the case label where evt->u.abs is the correct name; thankfully, both members of the union have the same type, so it happened to work, but it is now cleaner. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1457021813-10704-8-git-send-email-eblake@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
- 29 1月, 2016 1 次提交
-
-
由 Peter Maydell 提交于
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-38-git-send-email-peter.maydell@linaro.org
-
- 17 12月, 2015 1 次提交
-
-
由 Eric Blake 提交于
Now that we guarantee the user doesn't have any enum values beginning with a single underscore, we can use that for our own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious that the sentinel is generated. This patch was mostly generated by applying a temporary patch: |diff --git a/scripts/qapi.py b/scripts/qapi.py |index e6d014b..b862ec9 100644 |--- a/scripts/qapi.py |+++ b/scripts/qapi.py |@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = { | max_index = c_enum_const(name, 'MAX', prefix) | ret += mcgen(''' | [%(max_index)s] = NULL, |+// %(max_index)s | }; | ''', | max_index=max_index) then running: $ cat qapi-{types,event}.c tests/test-qapi-types.c | sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list $ git grep -l _MAX | xargs sed -i -f list The only things not generated are the changes in scripts/qapi.py. Rejecting enum members named 'MAX' is now useless, and will be dropped in the next patch. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> [Rebased to current master, commit message tweaked] Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
- 02 11月, 2015 1 次提交
-
-
由 Eric Blake 提交于
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for input-related code. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-20-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
- 23 10月, 2015 1 次提交
-
-
由 Laurent Vivier 提交于
ESCC is a serial port controller, so add it to the input category. Signed-off-by: NLaurent Vivier <laurent@vivier.eu> Reviewed-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
- 16 6月, 2014 1 次提交
-
-
由 Juan Quintela 提交于
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: NJuan Quintela <quintela@redhat.com> Acked-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
-
- 16 5月, 2014 3 次提交
-
-
由 Gerd Hoffmann 提交于
Reported-by: NOlivier Danet <odanet@caramail.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Reported-by: NOlivier Danet <odanet@caramail.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Nasty 0xe0 logic is gone. We map through QKeyCode now, giving us a nice, readable mapping table. Quick smoke test in OpenFirmware looks ok. Careful check from arch maintainers would be very nice, especially on the capslock and numlock logic. I'm not fully sure whenever I got it translated correctly and also what it is supposed to do in the first place ... Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 30 7月, 2013 1 次提交
-
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 04 7月, 2013 3 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
We are using the same struct name for two devices. 8250 is widespread enough that this causes some confusion, rename the other instance. Reviewed-by: NAndreas Faerber <afaerber@suse.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 16 4月, 2013 1 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 09 4月, 2013 2 次提交
-
-
由 Paolo Bonzini 提交于
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 01 3月, 2013 1 次提交
-
-
由 Paolo Bonzini 提交于
Done with this script: cd hw for i in `find . -name '*.h' | sed 's/^..//'`; do echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,' done | sed -i -f - `find . -type f` This is so that paths remain valid as files are moved. Instead, files in hw/dataplane are referenced with the relative path. We know they are not going to move to include/, and they are the only include files that are in subdirectories _and_ move. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 22 1月, 2013 1 次提交
-
-
由 Andreas Färber 提交于
Replace by SYS_BUS_DEVICE() QOM cast macro using a scripted conversion. Avoids the old macro creeping into new code. Resolve a Coding Style warning in openpic code. Signed-off-by: NAndreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 11 1月, 2013 1 次提交
-
-
由 Andreas Färber 提交于
Since 39bffca2 (qdev: register all types natively through QEMU Object Model), TypeInfo as used in the common, non-iterative pattern is no longer amended with information and should therefore be const. Fix the documented QOM examples: sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h Since frequently the wrong examples are being copied by contributors of new devices, fix all types in the tree: sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c This also avoids to piggy-back these changes onto real functional changes or other refactorings. Signed-off-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 19 12月, 2012 2 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 23 10月, 2012 1 次提交
-
-
由 Avi Kivity 提交于
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 7月, 2012 1 次提交
-
-
由 Peter Maydell 提交于
Drop a duplicate definition of the 'disabled' property from the escc qdev property list: this redefinition is currently effectively ignored but will become an error. (The duplication was inadvertently introduced in 2009 in commit ec02f7de.) Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Acked-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 15 2月, 2012 1 次提交
-
-
由 Andreas Färber 提交于
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: NAndreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 04 2月, 2012 1 次提交
-
-
由 Anthony Liguori 提交于
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 1月, 2012 1 次提交
-
-
由 Anthony Liguori 提交于
This converts three devices because apic and ioapic are subclasses of sysbus. Converting subclasses independently of their base class is prohibitively hard. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 11月, 2011 1 次提交
-
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 22 8月, 2011 4 次提交
-
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Blue Swirl 提交于
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Edited report from pahole on amd64 host: struct ChannelState { ... ChnType type; /* 32 4 */ /* XXX 4 bytes hole, try to pack */ ... uint8_t rregs[16]; /* 66 16 */ /* XXX 2 bytes hole, try to pack */ ... /* size: 392, cachelines: 7 */ /* sum members: 382, holes: 2, sum holes: 6 */ /* padding: 4 */ /* last cacheline: 8 bytes */ }; /* definitions: 1 */ Fix by rearranging the structure to avoid padding. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 08 8月, 2011 1 次提交
-
-
由 Avi Kivity 提交于
Reviewed-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 29 1月, 2011 1 次提交
-
-
由 Aurelien Jarno 提交于
Recent PowerPC kernel end up in kernel panic during boot in -nographic mode. In this mode the second serial port is used as the udbg console, and thus a few characters are sent on this port. This activates the tx interrupt flag, and later choke the Linux kernel, as it was not expecting such a flag to be set. The problem here comes from the fact that contrary to most devices the interrupt flags are only set if the interrupt is enabled. Quoting the datasheet: "If the corresponding IE bit is not set, the IP for that source of interrupt will never be set." This patch fixes that by enabling the interrupt flag only when the corresponding interrupt is enabled. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 11 12月, 2010 1 次提交
-
-
由 Alexander Graf 提交于
As stated before, devices can be little, big or native endian. The target endianness is not of their concern, so we need to push things down a level. This patch adds a parameter to cpu_register_io_memory that allows a device to choose its endianness. For now, all devices simply choose native endian, because that's the same behavior as before. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-