提交 30c2f238 编写于 作者: B Blue Swirl

escc: replace DPRINTFs with tracepoints

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
上级 42c812b9
......@@ -27,15 +27,7 @@
#include "escc.h"
#include "qemu-char.h"
#include "console.h"
/* debug serial */
//#define DEBUG_SERIAL
/* debug keyboard */
//#define DEBUG_KBD
/* debug mouse */
//#define DEBUG_MOUSE
#include "trace.h"
/*
* Chipset docs:
......@@ -69,25 +61,6 @@
* 2010-May-23 Artyom Tarasenko: Reworked IUS logic
*/
#ifdef DEBUG_SERIAL
#define SER_DPRINTF(fmt, ...) \
do { printf("SER: " fmt , ## __VA_ARGS__); } while (0)
#else
#define SER_DPRINTF(fmt, ...)
#endif
#ifdef DEBUG_KBD
#define KBD_DPRINTF(fmt, ...) \
do { printf("KBD: " fmt , ## __VA_ARGS__); } while (0)
#else
#define KBD_DPRINTF(fmt, ...)
#endif
#ifdef DEBUG_MOUSE
#define MS_DPRINTF(fmt, ...) \
do { printf("MSC: " fmt , ## __VA_ARGS__); } while (0)
#else
#define MS_DPRINTF(fmt, ...)
#endif
typedef enum {
chn_a, chn_b,
} ChnID;
......@@ -250,7 +223,7 @@ static void put_queue(void *opaque, int b)
ChannelState *s = opaque;
SERIOQueue *q = &s->queue;
SER_DPRINTF("channel %c put: 0x%02x\n", CHN_C(s), b);
trace_escc_put_queue(CHN_C(s), b);
if (q->count >= SERIO_QUEUE_SIZE)
return;
q->data[q->wptr] = b;
......@@ -274,7 +247,7 @@ static uint32_t get_queue(void *opaque)
q->rptr = 0;
q->count--;
}
SER_DPRINTF("channel %c get 0x%02x\n", CHN_C(s), val);
trace_escc_get_queue(CHN_C(s), val);
if (q->count > 0)
serial_receive_byte(s, 0);
return val;
......@@ -301,7 +274,7 @@ static void escc_update_irq(ChannelState *s)
irq = escc_update_irq_chn(s);
irq |= escc_update_irq_chn(s->otherchn);
SER_DPRINTF("IRQ = %d\n", irq);
trace_escc_update_irq(irq);
qemu_set_irq(s->irq, irq);
}
......@@ -486,8 +459,7 @@ static void escc_update_parameters(ChannelState *s)
ssp.parity = parity;
ssp.data_bits = data_bits;
ssp.stop_bits = stop_bits;
SER_DPRINTF("channel %c: speed=%d parity=%c data=%d stop=%d\n", CHN_C(s),
speed, parity, data_bits, stop_bits);
trace_escc_update_parameters(CHN_C(s), speed, parity, data_bits, stop_bits);
qemu_chr_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
}
......@@ -505,8 +477,7 @@ static void escc_mem_write(void *opaque, target_phys_addr_t addr,
s = &serial->chn[channel];
switch (saddr) {
case SERIAL_CTRL:
SER_DPRINTF("Write channel %c, reg[%d] = %2.2x\n", CHN_C(s), s->reg,
val & 0xff);
trace_escc_mem_writeb_ctrl(CHN_C(s), s->reg, val & 0xff);
newreg = 0;
switch (s->reg) {
case W_CMD:
......@@ -576,7 +547,7 @@ static void escc_mem_write(void *opaque, target_phys_addr_t addr,
s->reg = 0;
break;
case SERIAL_DATA:
SER_DPRINTF("Write channel %c, ch %d\n", CHN_C(s), val);
trace_escc_mem_writeb_data(CHN_C(s), val);
s->tx = val;
if (s->wregs[W_TXCTRL2] & TXCTRL2_TXEN) { // tx enabled
if (s->chr)
......@@ -608,8 +579,7 @@ static uint64_t escc_mem_read(void *opaque, target_phys_addr_t addr,
s = &serial->chn[channel];
switch (saddr) {
case SERIAL_CTRL:
SER_DPRINTF("Read channel %c, reg[%d] = %2.2x\n", CHN_C(s), s->reg,
s->rregs[s->reg]);
trace_escc_mem_readb_ctrl(CHN_C(s), s->reg, s->rregs[s->reg]);
ret = s->rregs[s->reg];
s->reg = 0;
return ret;
......@@ -620,7 +590,7 @@ static uint64_t escc_mem_read(void *opaque, target_phys_addr_t addr,
ret = get_queue(s);
else
ret = s->rx;
SER_DPRINTF("Read channel %c, ch %d\n", CHN_C(s), ret);
trace_escc_mem_readb_data(CHN_C(s), ret);
if (s->chr)
qemu_chr_accept_input(s->chr);
return ret;
......@@ -656,7 +626,7 @@ static int serial_can_receive(void *opaque)
static void serial_receive_byte(ChannelState *s, int ch)
{
SER_DPRINTF("channel %c put ch %d\n", CHN_C(s), ch);
trace_escc_serial_receive_byte(CHN_C(s), ch);
s->rregs[R_STATUS] |= STATUS_RXAV;
s->rx = ch;
set_rxint(s);
......@@ -768,8 +738,7 @@ static void sunkbd_event(void *opaque, int ch)
ChannelState *s = opaque;
int release = ch & 0x80;
KBD_DPRINTF("Untranslated keycode %2.2x (%s)\n", ch, release? "release" :
"press");
trace_escc_sunkbd_event_in(ch);
switch (ch) {
case 58: // Caps lock press
s->caps_lock_mode ^= 1;
......@@ -803,13 +772,13 @@ static void sunkbd_event(void *opaque, int ch)
} else {
ch = keycodes[ch & 0x7f];
}
KBD_DPRINTF("Translated keycode %2.2x\n", ch);
trace_escc_sunkbd_event_out(ch);
put_queue(s, ch | release);
}
static void handle_kbd_command(ChannelState *s, int val)
{
KBD_DPRINTF("Command %d\n", val);
trace_escc_kbd_command(val);
if (s->led_mode) { // Ignore led byte
s->led_mode = 0;
return;
......@@ -841,8 +810,7 @@ static void sunmouse_event(void *opaque,
ChannelState *s = opaque;
int ch;
MS_DPRINTF("dx=%d dy=%d buttons=%01x\n", dx, dy, buttons_state);
trace_escc_sunmouse_event(dx, dy, buttons_state);
ch = 0x80 | 0x7; /* protocol start byte, no buttons pressed */
if (buttons_state & MOUSE_EVENT_LBUTTON)
......
......@@ -446,3 +446,18 @@ disable qemu_co_mutex_lock_entry(void *mutex, void *self) "mutex %p self %p"
disable qemu_co_mutex_lock_return(void *mutex, void *self) "mutex %p self %p"
disable qemu_co_mutex_unlock_entry(void *mutex, void *self) "mutex %p self %p"
disable qemu_co_mutex_unlock_return(void *mutex, void *self) "mutex %p self %p"
# hw/escc.c
disable escc_put_queue(char channel, int b) "channel %c put: 0x%02x"
disable escc_get_queue(char channel, int val) "channel %c get 0x%02x"
disable escc_update_irq(int irq) "IRQ = %d"
disable escc_update_parameters(char channel, int speed, int parity, int data_bits, int stop_bits) "channel %c: speed=%d parity=%c data=%d stop=%d"
disable escc_mem_writeb_ctrl(char channel, uint32_t reg, uint32_t val) "Write channel %c, reg[%d] = %2.2x"
disable escc_mem_writeb_data(char channel, uint32_t val) "Write channel %c, ch %d"
disable escc_mem_readb_ctrl(char channel, uint32_t reg, uint8_t val) "Read channel %c, reg[%d] = %2.2x"
disable escc_mem_readb_data(char channel, uint32_t ret) "Read channel %c, ch %d"
disable escc_serial_receive_byte(char channel, int ch) "channel %c put ch %d"
disable escc_sunkbd_event_in(int ch) "Untranslated keycode %2.2x"
disable escc_sunkbd_event_out(int ch) "Translated keycode %2.2x"
disable escc_kbd_command(int val) "Command %d"
disable escc_sunmouse_event(int dx, int dy, int buttons_state) "dx=%d dy=%d buttons=%01x"
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册