zero is a valid interface number, so don't use it when resetting the
endpoints.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Create a new usb_ep_reset() function to reset endpoint state, without
re-initialiting the queues, so we don't unlink in-flight packets just
because usb-host has to re-parse the descriptor tables.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Commit 0f588df8, added code
to ehci_wakeup to kick the async schedule on wakeup, but the else
was positioned wrong making it trigger for devices which are routed
to the companion rather then to the ehci controller itself.

This patch fixes this. Note that the "programming style" with using the
return at the end of the companion block matches how the companion case
is handled in the other ports ops, and is done this way for consistency.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

hcd-ehci.c is missing an usb_packet_init() call for the ipacket UsbPacket
it uses for isoc transfers, triggering an assert (taking the entire vm down)
in usb_packet_setup as soon as any isoc transfers are done by a high speed
USB device.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Commit 4be23939 makes ehci instantly
zap any unlinked queue heads when the guest rings the doorbell.

While hacking up uas support this turned out to be a problem.  The linux
kernel can unlink and instantly relink the very same queue head, thereby
killing any async packets in flight.  That alone isn't an issue yet, the
packet will canceled and resubmitted and everything is fine.  We'll run
into trouble though in case the async packet is completed already, so we
can't cancel it any more.  The transaction is simply lost then.

usb_ehci_qh_ptrs q (nil) - QH @ 39c4f000: next 39c4f122 qtds 00000000,00000001,39c50000
usb_ehci_qh_fields QH @ 39c4f000 - rl 0, mplen 0, eps 0, ep 0, dev 0
usb_ehci_qh_ptrs q 0x7f95feba90a0 - QH @ 39c4f000: next 39c4f122 qtds 00000000,00000001,39c50000
usb_ehci_qh_fields QH @ 39c4f000 - rl 0, mplen 0, eps 0, ep 0, dev 0
usb_ehci_qh_ptrs q 0x7f95fe515210 - QH @ 39c4f120: next 39c4f0c2 qtds 29dbce40,29dbc4e0,00000009
usb_ehci_qh_fields QH @ 39c4f120 - rl 4, mplen 512, eps 2, ep 1, dev 2
usb_ehci_packet_action q 0x7f95fe515210 p 0x7f95fdec32a0: alloc
usb_packet_state_change bus 0, port 2, ep 1, packet 0x7f95fdec32e0, state undef -> setup
usb_ehci_packet_action q 0x7f95fe515210 p 0x7f95fdec32a0: process
usb_uas_command dev 2, tag 0x2, lun 0, lun64 00000000-00000000
scsi_req_parsed target 0 lun 0 tag 2 command 42 dir 2 length 16384
scsi_req_parsed_lba target 0 lun 0 tag 2 command 42 lba 5933312
scsi_req_alloc target 0 lun 0 tag 2
scsi_req_continue target 0 lun 0 tag 2
scsi_req_data target 0 lun 0 tag 2 len 16384
usb_uas_scsi_data dev 2, tag 0x2, bytes 16384
usb_uas_write_ready dev 2, tag 0x2
usb_packet_state_change bus 0, port 2, ep 1, packet 0x7f95fdec32e0, state setup -> complete
usb_ehci_packet_action q 0x7f95fe515210 p 0x7f95fdec32a0: free
usb_ehci_qh_ptrs q 0x7f95fdec3210 - QH @ 39c4f0c0: next 39c4f002 qtds 29dbce40,00000001,00000009
usb_ehci_qh_fields QH @ 39c4f0c0 - rl 4, mplen 512, eps 2, ep 2, dev 2
usb_ehci_queue_action q 0x7f95fe5152a0: free
usb_packet_state_change bus 0, port 2, ep 2, packet 0x7f95feba9170, state async -> complete
^^^ async packets completes.
usb_ehci_packet_action q 0x7f95fdec3210 p 0x7f95feba9130: wakeup

usb_ehci_qh_ptrs q (nil) - QH @ 39c4f000: next 39c4f122 qtds 00000000,00000001,39c50000
usb_ehci_qh_fields QH @ 39c4f000 - rl 0, mplen 0, eps 0, ep 0, dev 0
usb_ehci_qh_ptrs q 0x7f95feba90a0 - QH @ 39c4f000: next 39c4f122 qtds 00000000,00000001,39c50000
usb_ehci_qh_fields QH @ 39c4f000 - rl 0, mplen 0, eps 0, ep 0, dev 0
usb_ehci_qh_ptrs q 0x7f95fe515210 - QH @ 39c4f120: next 39c4f002 qtds 29dbc4e0,29dbc8a0,00000009
usb_ehci_qh_fields QH @ 39c4f120 - rl 4, mplen 512, eps 2, ep 1, dev 2
usb_ehci_queue_action q 0x7f95fdec3210: free
usb_ehci_packet_action q 0x7f95fdec3210 p 0x7f95feba9130: free
^^^ endpoint #2 queue head removed from schedule, doorbell makes ehci zap the queue,
    the (completed) usb packet is freed too and gets lost.

usb_ehci_qh_ptrs q (nil) - QH @ 39c4f000: next 39c4f0c2 qtds 00000000,00000001,39c50000
usb_ehci_qh_fields QH @ 39c4f000 - rl 0, mplen 0, eps 0, ep 0, dev 0
usb_ehci_qh_ptrs q 0x7f95feba90a0 - QH @ 39c4f000: next 39c4f0c2 qtds 00000000,00000001,39c50000
usb_ehci_qh_fields QH @ 39c4f000 - rl 0, mplen 0, eps 0, ep 0, dev 0
usb_ehci_queue_action q 0x7f9600dff570: alloc
usb_ehci_qh_ptrs q 0x7f9600dff570 - QH @ 39c4f0c0: next 39c4f122 qtds 29dbce40,00000001,00000009
usb_ehci_qh_fields QH @ 39c4f0c0 - rl 4, mplen 512, eps 2, ep 2, dev 2
usb_ehci_packet_action q 0x7f9600dff570 p 0x7f95feba9130: alloc
usb_packet_state_change bus 0, port 2, ep 2, packet 0x7f95feba9170, state undef -> setup
usb_ehci_packet_action q 0x7f9600dff570 p 0x7f95feba9130: process
usb_packet_state_change bus 0, port 2, ep 2, packet 0x7f95feba9170, state setup -> async
usb_ehci_packet_action q 0x7f9600dff570 p 0x7f95feba9130: async
^^^ linux kernel relinked the queue head, ehci creates a new usb packet,
    but we should have delivered the completed one instead.
usb_ehci_qh_ptrs q 0x7f95fe515210 - QH @ 39c4f120: next 39c4f002 qtds 29dbc4e0,29dbc8a0,00000009
usb_ehci_qh_fields QH @ 39c4f120 - rl 4, mplen 512, eps 2, ep 1, dev 2

So instead of instantly zapping the queue we'll set a flag that the
queue needs revalidation in case we'll see it again in the schedule.
ehci then checks that the queue head fields addressing / describing the
endpoint and the qtd pointer match the cached content before reusing it.

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Only write back the dwords the hc is supposed to update.  Should not
make a difference in theory as the guest must not touch the td while
it is active to avoid races.  But it is still more correct.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Use ehci_flush_qh to make sure we touch inly the fields the hc is
allowed to touch.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add functions deposit32(), deposit64(), extract32() and extract64()
to extract and deposit bitfields in 32 and 64 bit words. Based on
ideas by Jia Liu and Avi Kivity.
Suggested-by: NJia Liu <proljc@gmail.com>
Suggested-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Rephrase some of the expressions used to select an entry
in the SSE op table arrays so that it's clearer that they
don't overrun the op table array size.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The X86_64_DEF macro is a confusing way of making some terms
in a conditional only appear if TARGET_X86_64 is defined. We
only use it in two places, and in both cases this is for making
the same test, so abstract that check out into a function
where we can use a more conventional #ifdef.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Commit 11f8cdbc removed all the uses of the X86_64_ONLY
macro. The BUGGY_64() macro has been unused for a long time:
it originally marked some ops which couldn't be enabled
because of issues with the pre-TCG code generation scheme.
Remove the now-unnecessary definitions of both macros.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Makes sure the following files are ignored:

  libcacard/.libs/
  libcacard/libcacard.la
  libcacard/libcacard.pc
  libcacard/libcacard/
  libcacard/osdep.lo
  libcacard/oslib-posix.lo
  libcacard/qemu-thread-posix.lo
  libcacard/qemu-timer-common.lo
  libcacard/trace.lo
  libcacard/trace/
  tests/test-visitor-serialization
  vscclient
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
  hw/cadence_gem: Make rx_desc_addr and tx_desc_addr uint32_t
  i.MX31: KZM-ARM11-01 evaluation board
  i.MX31: Interrupt Controller
  i.MX31: Timers
  i.MX31: Clock Control Module
  i.MX: UART support
  Exynos4: add RTC device
  hw/exynos4210.c: Fix misleading initialization of IROM mirror
  hw/exynos4210_pwm.c: Fix STOP status in tick handler.
  ARM: hw/exynos4210_mct.c: Fix a bug which hangs Linux kernel.

commit c4baa050 improved SSE table
type safety which now raises compiler errors when latest QEMU was
configured with --enable-debug.

Fix this by splitting the SSE tables even further to separate
helper functions with different signatures.

Instead of crashing by calling address 0, the code now jumps to
label illegal_op.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Make the state fields rx_desc_addr and tx_desc_addr uint32_t;
this matches the VMStateDescription, and also conforms to how
hardware works: the registers don't magically become larger
if the device is attached to a CPU with a larger physical
address size. It also fixes a compile failure if the
target_phys_addr_t type is changed to 64 bits.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>

Board support for Kyoto Micro's KZM-ARM11-01, an evaluation board built
around the Freescale i.MX31.
Signed-off-by: NPhilip O'Sullivan <philipo@ok-labs.com>
Signed-off-by: NPeter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement the Freescale i.MX31 advanced vectored interrupt controller, at least
to the extent it is used by Linux 3.x

Vectors are not implemented.
Signed-off-by: NPhilip O'Sullivan <philipo@ok-labs.com>
Signed-off-by: NPeter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement the timers on the Freescale i.MX31 SoC.
This is not a complete implementation, but gives enough for
Linux to boot and run. In particular external triggers, which are
not useful under QEMU, are not implemented.
Signed-off-by: NPhilip O'Sullivan <philipo@ok-labs.com>
Signed-off-by: NPeter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

For Linux to be able to work out how fast its clocks are going, so
that timer ticks come approximately at the right time, it needs to
be able to query the clock control module (CCM).

This is the start of a CCM implementation.  It currently knows only about
the MCU, HSP and IPG clocks --- i.e., the ones used to feed the periodic
and general purpose timers.
Signed-off-by: NPeter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement the Freescale i.MX UART.  This uart is used in a variety of
SoCs, including some by Motorola, as well as in the Freescale i.MX
series.

This patch gives only a `bare-bones' implementation, enough to run Linux
or OKL4, but that's about it.
Signed-off-by: NPhilip O'Sullivan <philipo@ok-labs.com>
Signed-off-by: NPeter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NOleg Ogurtsov <o.ogurtsov@samsung.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We want to mirror whole IROM and should pass zero instead of
EXYNOS4210_IROM_BASE_ADDR (though it equals to zero too) since
memory_region_init_alias takes an offset within an original
region as an argument.
Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

START/STOP bit was not cleaned correctly.
Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

After some long period of time Linux kernel hanged due to
ptimer_get_count may return 0 before timer interrupt occurs,
thus, causing FRC to jump back in time
Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Link in oslib objects also for BSD user, but avoid using the version of
qemu_vmalloc() defined in oslib-posix.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Rename what is remaining of op_helper.c to seg_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move memory access helpers to mem_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move various functions to misc_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move SMM helpers to smm_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move SVM helpers to svm_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move integer and bit field helpers to int_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move condition code helpers to cc_helper.c.

Move the shared inline functions lshift(), cpu_load_eflags() and
cpu_cc_compute_all() to cpu.h.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Adjust function names and add an explicit CPUX86State
parameter instead of relying on AREG0.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move shift templates from helper_template.h to
shift_helper_template.h and the condition code helpers
to cc_helper_template.h.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix coding style in helper_template.h before next commit.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

SSE function tables could easily be corrupted because of use
of void pointers.

Introduce function pointer types and helper variables in order
to improve type safety.

Split sse_op_table3 according to types used.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move FPU and MMX/SSE helpers to fpu_helpers.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix coding style in ops_sse.h before next commit.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

After the previous patch, we can use the proper
declaration in a common header file.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>