This patch adds the header file for megasas.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If the device we open is a SMC or SSC device, then force the use of sg. We
dont have any medium changer or tape emulation so only passthrough via
real sg or scsi-generic via iscsi would work anyway.

Forcing sg also makes qemu skip trying to read from the device to guess
the image format by reading from the device (find_image_format()).
SMC devices do not implement READ6/10/12/16 so it is not possible to
read from them (SSC have different CDBs).

With this patch I can successfully manage a SMC device wiht iscsi in
passthrough mode.
Signed-off-by: NRonnie Sahlberg <ronniesahlberg@gmail.com>
[Added TYPE_TAPE handling - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Update iscsi to allow passthrough of SG_IO scsi commands when the iscsi
device is forced to be scsi-generic.

Implement both bdrv_ioctl() and bdrv_aio_ioctl() in the iscsi backend,
emulate the SG_IO ioctl and pass the SCSI commands across to the
iscsi target.

This allows end-to-end passthrough of SCSI all the way from the guest,
to qemu, via scsi-generic, then libiscsi all the way to the iscsi target.

To activate this you need to specify that the iscsi lun should be treated
as a scsi-generic device.

Example:
    -device lsi -device scsi-generic,drive=MyISCSI \
    -drive file=iscsi://10.1.1.125/iqn.ronnie.test/1,if=none,id=MyISCSI

Note, you can currently not boot a qemu guest from a scsi device.

Note,
This only works when the host is linux, since the emulation relies on
definitions of SG_IO from the scsi-generic implementation in the
linux kernel.
It should be fairly easy to re-implement some structures similar enough
for non-linux hosts to do the same style of passthrough via a fake
scsi generic layer and libiscsi if need be.
Signed-off-by: NRonnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This command is not necessary for CD-ROM and DVD-ROM, but some versions of
udev trip on its absence.

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This command is not necessary for CD-ROM and DVD-ROM, but some versions of
udev trip on its absence.

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The last four bytes of the thin provisioning page were cut out.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Link in oslib objects also for BSD user, but avoid using the version of
qemu_vmalloc() defined in oslib-posix.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Rename what is remaining of op_helper.c to seg_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move memory access helpers to mem_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move various functions to misc_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move SMM helpers to smm_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move SVM helpers to svm_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move integer and bit field helpers to int_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move condition code helpers to cc_helper.c.

Move the shared inline functions lshift(), cpu_load_eflags() and
cpu_cc_compute_all() to cpu.h.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Adjust function names and add an explicit CPUX86State
parameter instead of relying on AREG0.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move shift templates from helper_template.h to
shift_helper_template.h and the condition code helpers
to cc_helper_template.h.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix coding style in helper_template.h before next commit.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

SSE function tables could easily be corrupted because of use
of void pointers.

Introduce function pointer types and helper variables in order
to improve type safety.

Split sse_op_table3 according to types used.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move FPU and MMX/SSE helpers to fpu_helpers.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix coding style in ops_sse.h before next commit.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

After the previous patch, we can use the proper
declaration in a common header file.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Move exception handlers from op_helper.c to excp_helper.c.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Add an explicit CPUX86State parameter instead of relying on AREG0.

Merge raise_exception_env() to raise_exception(), likewise with
raise_exception_err_env() and raise_exception_err().

Introduce cpu_svm_check_intercept_param() and cpu_vmexit()
as wrappers.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix coding style and a few typos.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The emulated devices can run simultaneously with the guest, so
we need to be careful with ordering of load and stores done by
them to the guest system memory, which need to be observed in
the right order by the guest operating system.

This adds a barrier call to the basic DMA read/write ops which
is currently implemented as a smp_mb(), but could be later
improved for more fine grained control of barriers.

Additionally, a _relaxed() variant of the accessors is provided
to easily convert devices who would be performance sensitive
and negatively impacted by the change.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Currently the pseries machine emulation does not support DMA for emulated
PCI devices, because the PAPR spec always requires a (guest visible,
paravirtualized) IOMMU which was not implemented.  Now that we have
infrastructure for IOMMU emulation, we can correct this and allow PCI DMA
for pseries.

With the existing PAPR IOMMU code used for VIO devices, this is almost
trivial. We use a single DMAContext for each (virtual) PCI host bridge,
which is the usual configuration on real PAPR machines (which often have
_many_ PCI host bridges).

Cc: Alex Graf <agraf@suse.de>
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds some hooks to let PCI devices and busses use the new IOMMU
infrastructure.  When IOMMU support is enabled, each PCI device now
contains a DMAContext * which is used by the pci_dma_*() wrapper functions.

By default, the contexts are initialized to NULL, assuming no IOMMU.
However the platform or host bridge code which sets up the PCI bus can use
pci_setup_iommu() to set a function which will determine the correct
DMAContext for a given PCI device.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The pseries platform already contains an IOMMU implementation, since it is
essential for the platform's paravirtualized VIO devices.  This IOMMU
support is currently built into the implementation of the VIO "bus" and
the various VIO devices.

This patch converts this code to make use of the new common IOMMU
infrastructure.

We don't yet handle synchronization of map/unmap callbacks vs. invalidations,
this will require some complex interaction with the kernel and is not a
major concern at this stage.

Cc: Alex Graf <agraf@suse.de>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds the basic infrastructure necessary to emulate an IOMMU
visible to the guest.  The DMAContext structure is extended with
information and a callback describing the translation, and the various
DMA functions used by devices will now perform IOMMU translation using
this callback.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The USB UHCI and EHCI drivers were converted some time ago to use the
pci_dma_*() helper functions.  However, this conversion was not complete
because in some places both these drivers do DMA via the usb_packet_map()
function in usb-libhw.c.  That function directly used
cpu_physical_memory_map().

Now that the sglist code uses DMA wrappers properly, we can convert the
functions in usb-libhw.c, thus conpleting the conversion of UHCI and EHCI
to use the DMA wrappers.

Note that usb_packet_map() invokes dma_memory_map() with a NULL invalidate
callback function.  When IOMMU support is added, this will mean that
usb_packet_map() and the corresponding usb_packet_unmap() must be called in
close proximity without dropping the qemu device lock - otherwise the guest
might invalidate IOMMU mappings while they are still in use by the device
code.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The AHCI device can provide both PCI and SysBus AHCI device
emulations.  For this reason, it wasn't previously converted to use
the pci_dma_*() helper functions.  Now that we have universal DMA
helper functions, this converts AHCI to use them.

The DMAContext is obtained from pci_dma_context() in the PCI case and
set to NULL in the SysBus case (i.e. we assume for now that a SysBus
AHCI has no IOMMU translation).

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

dma-helpers.c contains a number of helper functions for doing
scatter/gather DMA, and various block device related DMA.  Currently,
these directly access guest memory using cpu_physical_memory_*(),
assuming no IOMMU translation.

This patch updates this code to use the new universal DMA helper
functions.  qemu_sglist_init() now takes a DMAContext * to describe
the DMA address space in which the scatter/gather will take place.

We minimally update the callers qemu_sglist_init() to pass NULL
(i.e. no translation, same as current behaviour).  Some of those
callers should pass something else in some cases to allow proper IOMMU
translation in future, but that will be fixed in later patches.

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The OHCI device emulation can provide both PCI and SysBus OHCI
implementations.  Because of this, it was not previously converted to
use the PCI DMA helper functions.

This patch converts it to use the new universal DMA helper functions.
In the PCI case, it obtains its DMAContext from pci_dma_context(), in
the SysBus case, it uses NULL - i.e. assumes for now that there will
be no IOMMU translation for a SysBus OHCI.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Not that long ago, every device implementation using DMA directly
accessed guest memory using cpu_physical_memory_*().  This meant that
adding support for a guest visible IOMMU would require changing every
one of these devices to go through IOMMU translation.

Shortly before qemu 1.0, I made a start on fixing this by providing
helper functions for PCI DMA.  These are currently just stubs which
call the direct access functions, but mean that an IOMMU can be
implemented in one place, rather than for every PCI device.

Clearly, this doesn't help for non PCI devices, which could also be
IOMMU translated on some platforms.  It is also problematic for the
devices which have both PCI and non-PCI version (e.g. OHCI, AHCI) - we
cannot use the the pci_dma_*() functions, because they assume the
presence of a PCIDevice, but we don't want to have to check between
pci_dma_*() and cpu_physical_memory_*() every time we do a DMA in the
device code.

This patch makes the first step on addressing both these problems, by
introducing new (stub) dma helper functions which can be used for any
DMA capable device.

These dma functions take a DMAContext *, a new (currently empty)
variable describing the DMA address space in which the operation is to
take place.  NULL indicates untranslated DMA directly into guest
physical address space.  The intention is that in future non-NULL
values will given information about any necessary IOMMU translation.

DMA using devices must obtain a DMAContext (or, potentially, contexts)
from their bus or platform.  For now this patch just converts the PCI
wrappers to be implemented in terms of the universal wrappers,
converting other drivers can take place over time.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

A while back, we introduced the dma_addr_t type, which is supposed to
be used for bus visible memory addresses.  At present, this is an
alias for target_phys_addr_t, but this will change when we eventually
add support for guest visible IOMMUs.

There are some instances of target_phys_addr_t in the code now which
should really be dma_addr_t, but can't be trivially converted due to
missing features which this patch corrects.

 * We add DMA_ADDR_BITS analagous to TARGET_PHYS_ADDR_BITS.  This is
   important where we need to make a compile-time (#if) based on the
   size of dma_addr_t.

 * We add a new helper macro to create device properties which take a
   dma_addr_t, currently an alias to DEFINE_PROP_TADDR().
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit ff71f2e8 prevent the possible
crash during initialization of linux driver by checking the operating
mode.This seems too strict as:

- the real card could still work in mode other than normal
- some buggy driver who does not set correct opmode after eeprom
 access

So, considering rx ring address were reset to zero (which could be
safely trated as an address not intened to DMA to), in order to
both letting old guest work and preventing the unexpected DMA to
guest, we can forbid packet receiving when rx ring address is zero.
Tested-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

QEMU now has a fundamental requirement for pthreads, so there
is no compelling reason to retain support for the non-threaded
VNC server. Remove the --{enable,disable}-vnc-thread configure
arguments, and all CONFIG_VNC_THREAD conditionals
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit ec5b06d7 (configure: ensure directory exists when creating symlinks)
moved the creation of directories into the symlink() function but forgot
the case where no symlink is created.

This leads to build errors on arm Linux due to -I../linux-headers.

Unbreak the build on arm Linux by reverting part of that commit.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Now we create object files in a hierarchy under hw/, so the
'clean' target must also be updated to delete those object files.
Rather than using a manual list of subdirectories which will
easily drift out of date, we just delete all .o and .d files
in the target directory hierarchy.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>