This converts three devices because apic and ioapic are subclasses of sysbus.
Converting subclasses independently of their base class is prohibitively hard.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

PCIHostState already has a busdev.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Add -pcihost to SysBus devices to resolve name conflicts,
and clarify PCI vs. Internal PCI.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAvi Kivity <avi@redhat.com>

Avoid vga.chain4 mapping by constructing a PCI hole for upper
2G of the PCI space.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Reviewed-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This reverts commit 8ef9ea85, reversing
changes made to 444dc482.

From Avi:

  Please revert the entire pull (git revert 8ef9ea85) while I work this
  out - it isn't trivial.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Reviewed-by: NRichard Henderson  <rth@twiddle.net>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This lets us register BARs in the I/O address space.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is now done sloppily, via get_system_memory().  Eventually callers
will be converted to stop using that.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

use PCIDeviceInfo to initialize ids.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

It was migrating the wrong structures, no way it would work
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

There's no need to bswap once we correctly set the mmio to be little endian.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The only reason we have bswap versions of the pci host code is that
most pci host devices are little endian. The ppc e500 is the only
odd one here, being big endian.

So let's directly pass the endianness down to the mmio layer and not
worry about it on the pci host layer.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

As an alternative to the 3 individual handlers, there is also a simplified
io mem hook function. To be consistent, let's add an endianness parameter
there too.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Don't overwrite pci header type.
Otherwise, multi function bit which pci_init_header_type() sets
appropriately is lost.
Anyway PCI_HEADER_TYPE_NORMAL is zero, so it is unnecessary to zero
which is already zero cleared.

how to test:
run qemu and issue info pci to see whether a device in question is
normal device, not pci-to-pci bridge.
This is handy because guest os isn't required.

tested changes:
The following files are covered by using following commands.
sparc64-softmmu
  apb_pci.c, vga-pci.c, cmd646.c, ne2k_pci.c, sun4u.c
ppc-softmmu
  grackle_pci.c, cmd646.c, ne2k_pci.c, vga-pci.c, macio.c
ppc-softmmu -M mac99
  unin_pci.c(uni-north, uni-north-agp)
ppc64-softmmu
  pci-ohci, ne2k_pci, vga-pci, unin_pci.c(u3-agp)
x86_64-softmmu
  acpi_piix4.c, ide/piix.c, piix_pci.c
  -vga vmware vmware_vga.c
  -watchdog i6300esb wdt_i6300esb.c
  -usb usb-uhci.c
  -sound ac97 ac97.c
  -nic model=rtl8139 rtl8139.c
  -nic model=pcnet pcnet.c
  -balloon virtio virtio-pci.c:

untested changes:
The following changes aren't tested.
prep_pci.c: ppc-softmmu -M prep should cover, but core dumped.
unin_pci.c(uni-north-pci): the caller is commented out.
openpic.c: the caller is commented out in ppc_prep.c
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use PCI_DEVFN() and PCI_FUNC_MAX where appropriate.
This patch make it clear that func = 0.

test:
The following object files with/without this patch are stripped and compared.
They remains same.
  arm-softmmu/versatile_pci.o
  libhw32/ppce500_pci.o
  libhw32/unin_pci.o
  libhw64/ppce500_pci.o
  libhw64/unin_pci.o
  mips-softmmu/gt64xxx.o
  mips64-softmmu/gt64xxx.o
  mips64el-softmmu/gt64xxx.o
  mipsel-softmmu/gt64xxx.o

Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yu Liu <yu.liu@freescale.com>
Cc: Paul Brook <paul@codesourcery.com>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

When available, we'd like to be able to access the DeviceState
when registering a savevm.  For buses with a get_dev_path()
function, this will allow us to create more unique savevm
id strings.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Make byte swapping unconditional since PPC is big endian.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Convert pci_host_conf_register_mmio_noswap(x) to
pci_host_conf_register_mmio(x, 0).

Convert pci_host_conf_register_mmio(x) to
pci_host_conf_register_mmio(x, 1) for big endian hosts, all cases
happen to be BE.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The interrupt code as is didn't really work for me. I couldn't even convince
Linux to take interrupt 9 in an interrupt-map.

So let's do this right. Let's map all PCI interrupts to 0x1b - 0x1e. That way
we're at least a small step closer to what real hardware does.

I also took the interrupt pin to line conversion from OpenBIOS, which at least
assures us we're compatible with our firmware :-).

A dump of the PCI interrupt-map from a U2 (iBook):

00009000 00000000 00000000 00000000 ff97c528 00000034 00000001
0000d800 00000000 00000000 00000000 ff97c528 0000003f 00000001
0000c000 00000000 00000000 00000000 ff97c528 0000001b 00000001
0000c800 00000000 00000000 00000000 ff97c528 0000001c 00000001
0000d000 00000000 00000000 00000000 ff97c528 0000001d 00000001
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The "Mac99" type so far defines a "U2" based configuration. Unfortunately,
there have never been any U2 based PPC64 machines. That's what the U3 was
developed for.

So let's split the Mac99 machine in a PPC64 and a PPC32 machine. The PPC32
machine stays "Mac99", while the PPC64 one becomes "Mac99_U3". All peripherals
stay the same.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The Uninorth PCI bridge requires different layouts in its PCI config space
accessors.

This patch introduces a conversion function that makes it compatible with
the way Linux accesses it.

I also kept an OpenBIOS compatibility hack in. I think it'd be better to
take small steps here and do the config space access rework in OpenBIOS
later on. When that's done we can remove that hack.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

It's currently not used by PPC machines. Refactor so that also Sparc64
machines can use it.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

PCI bridges' qdev info structures must indicate bridge header type,
otherwise critical bridge registers (esp. PCI_PRIMARY_BUS,
PCI_SECONDARY_BUS, PCI_SUBORDINATE_BUS) will not be writable.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Switch to the names suggested by Blue Swirl.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Device names with whitespace require quoting in the shell and in the
monitor.  Some of the offenders are also overly long.  Some have a
more convenient alias, some don't.

The place for verbose device names is DeviceInfo member desc.  The
name should be short & sweet.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

pci_host_data_register_io_memory and its variants are too long a bit.
So shorten them. Now they are
pci_host_{conf, data}_register_{mmio, mmio_noswap, ioport}()
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Uni-North AGP device mapping was accidentally dropped in
2e29bd04.

Map the device.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Before 2e29bd04, Uni-North host and AGP
bridge were using the same devfn, 11 << 3. The net effect was that only
AGP bridge was visible. This was changed in the commit to 13 << 3 for AGP.

Some of the later crashes happened due to NULL pointer dereferences generated
by 07b7d053 and insufficient return value
checks.

Disable host device and revert AGP to 11 << 3.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

consolidate pci_config address access into pci_host.c
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

split static functions in pci_host.h into pci_host.c and
pci_host_template.h.
Later a structures declared in pci_host.h, PCIHostState, will be used.
However pci_host.h doesn't allow to include itself easily. This patches
addresses it.

pci_host.h includes functions which are instantiated in .c by including
pci_host.h with typedefing pci_addr_t.
pci_addr_t is per pci host bridge and is typedef'ed to uint32_t for ioio
or target_phys_addr_t for mmio in .c file.
That prevents from including pci_host.h to use PCIHostState because of
requiring type, pci_addr_t.

Its purpose to include is to instantiate io function for mmio or ioio
depending on which pci host bridge requires ioio or mmio.
To avoid including code, we always instantiate both version.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Like qdev_init(), but terminate program via hw_error() instead of
returning an error value.

Use it instead of qdev_init() where terminating the program on failure
is okay, either because it's during machine construction, or because
we know that failure can't happen.

Because relying in the latter is somewhat unclean, and the former is
not always obvious, it would be nice to go back to qdev_init() in the
not-so-obvious cases, only with proper error handling.  I'm leaving
that for another day, because it involves making sure that error
values are properly checked by all callers.

Patchworks-ID: 35168
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In the very least, a change like this requires discussion on the list.

The naming convention is goofy and it causes a massive merge problem.  Something
like this _must_ be presented on the list first so people can provide input
and cope with it.

This reverts commit 99a0949b.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Some not so obvious bits, slirp and Xen were left alone for the time
being.
Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

piix_pci want to pass more things that the pic
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>