- 23 2月, 2012 1 次提交
-
-
由 Luiz Capitulino 提交于
It's emitted whenever the tray is moved by the guest or by HMP/QMP commands. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Acked-by: NKevin Wolf <kwolf@redhat.com>
-
- 21 2月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
With the acceptance of some new APIs to libspice-server.so it is possible to add support for SPICE to the 'add_client' monitor command, bringing parity with VNC. Since SPICE can use TLS or plain connections, the command also gains a new 'tls' parameter to specify whether TLS should be attempted on the injected client sockets. This new feature is only enabled if building against a libspice-server >= 0.10.1 * qmp-commands.hx: Add 'tls' parameter & missing doc for 'skipauth' parameter * monitor.c: Wire up SPICE for 'add_client' command * ui/qemu-spice.h, ui/spice-core.c: Add qemu_spice_display_add_client API to wire up from monitor [1] http://cgit.freedesktop.org/spice/spice/commit/server/spice.h?id=d55b68b6b44f2499278fa860fb47ff22f5011faa http://cgit.freedesktop.org/spice/spice/commit/server/spice.h?id=bd07dde530d9504e1cfe7ed5837fc00c26f36716 Changes in v3: - Added 'optional' flag to new parameters documented - Added no-op impl of qemu_spice_display_add_client when SPICE is disabled during build Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 26 1月, 2012 3 次提交
-
-
由 Stefan Hajnoczi 提交于
Add query-block-jobs, which shows the progress of ongoing block device operations. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
Add block_job_cancel, which stops an active block streaming operation. When the operation has been cancelled the new BLOCK_JOB_CANCELLED event is emitted. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Stefan Hajnoczi 提交于
Add the block_stream command, which starts copy backing file contents into the image file. Also add the BLOCK_JOB_COMPLETED QMP event which is emitted when image streaming completes. Later patches add control over the background copy speed, cancelation, and querying running streaming operations. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 18 1月, 2012 6 次提交
-
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Include the name of the encrypted file. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Anthony Liguori 提交于
HMP is now implemented in terms of QMP. The monitor has a bunch of logic to deal with HMP right now like readline support. Export it from the monitor so we can consume it in hmp.c. In short time, hmp.c will take over all of the readline bits. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Drop the qerror_report() call from it and let its callers set the error themselves. This also allows for dropping the 'ret' variable. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 06 12月, 2011 6 次提交
-
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Please, note that the QMP command has a new 'cpu-index' parameter. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Commit 5bc465e4 converted only the HMP part of the system_powerdown command to the QAPI, this commit completes it by converting the QMP part too. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 17 11月, 2011 1 次提交
-
-
由 Markus Armbruster 提交于
stat() can fail for a file name just read with readdir(). Easiest way to trigger is a dangling symbolic link --- look ma, no race! When it fails, file_completion() uses sb.st_mode uninitialized. If the directory bit happens to be set, it appends a "/" to the completed name. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 02 11月, 2011 1 次提交
-
-
由 Wayne Xia 提交于
This patch would try sort the command list in monitor at runtime. As a result, command help and help info would show a more friendly sorted command list. For eg: (qemu)help acl_add acl_policy acl_remove acl_reset acl_show balloon block_passwd ... the command list is sorted. v3: using qsort function to sort the command list. Tested-by: NWenyi Gao <wenyi@linux.vnet.ibm.com> Signed-off-by: NWayne Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 27 10月, 2011 15 次提交
-
-
由 Luiz Capitulino 提交于
Previous commits converted all existing QMP commands to the QAPI, now each info command does its own QMP call. Let's then drop all QMP command handling code from do_info(). Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Because QMP development originated in the monitor, it has inherited the monitor's distinction between query- and non-query commands. However, previous commits unified both commands and the distinction is gone. This commit drops the query commands dispatch table and does some simplifications along the way. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
This also fixes a bug with the old version: QMP would invert device id and vendor id. This would look ok on HMP because it was printing "device:vendor" instead of "vendor:device". Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Please, note that some of the code supporting memory statistics is still around (eg. virtio_balloon_receive_stats() and reset_stats()). Also, the qmp_query_balloon() function is synchronous and thus doesn't make any use of the (not fully working) monitor's asynchronous command support (the old non-qapi implementation did). Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
There are three important remarks in relation to the non-qapi command: 1. This commit also fixes the behavior of the 'query-vnc' and 'info vnc' commands to return an error when qemu is built without VNC support (ie. --disable-vnc). The non-qapi command would return the OK response in QMP and no response in HMP 2. The qapi version explicitly marks the fields 'host', 'family', 'service' and 'auth' as optional. Their are not documented as optional in the non-qapi command doc, but they would not be returned if vnc support is disabled. The qapi version maintains the same semantics, but documents those fields correctly 3. The 'clients' field, which is a list, is marked as optional but is always returned. If there are no clients connected an empty list is returned. This is not the Right Way to this in the qapi but it's how the non-qapi command used to work Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Returns 'cur_mons's CPU index. A future commit will use it. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Also rename it to monitor_set_cpu(). Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Richard Henderson 提交于
This allows a more efficient representation for 64-bit hosts. It should be about the same for 32-bit hosts, as we can still access the individual pieces of the double. Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
- 25 10月, 2011 1 次提交
-
-
由 Yonit Halperin 提交于
RHBZ 737921 Spice client is required to connect to the migration target before/as migration starts. Since after migration starts, the target qemu is blocked and cannot accept new spice client we trigger the connection to the target upon client_migrate_info command. client_migrate_info completion cb will be called after spice client has been connected to the target (or a timeout). See following patches and spice patches. Signed-off-by: NYonit Halperin <yhalperi@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 16 10月, 2011 1 次提交
-
-
由 Jan Kiszka 提交于
This allows to drop various stubs and move the i8359 into hwlib. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 11 10月, 2011 1 次提交
-
-
由 Luiz Capitulino 提交于
This commit adds support to the BlockDriverState type to keep track of devices' I/O status. There are three possible status: BDRV_IOS_OK (no error), BDRV_IOS_ENOSPC (no space error) and BDRV_IOS_FAILED (any other error). The distinction between no space and other errors is important because a management application may want to watch for no space in order to extend the space assigned to the VM and put it to run again. Qemu devices supporting the I/O status feature have to enable it explicitly by calling bdrv_iostatus_enable() _and_ have to be configured to stop the VM on errors (ie. werror=stop|enospc or rerror=stop). In case of multiple errors being triggered in sequence only the first one is stored. The I/O status is always reset to BDRV_IOS_OK when the 'cont' command is issued. Next commits will add support to some devices and extend the query-block/info block commands to return the I/O status information. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 06 10月, 2011 1 次提交
-
-
由 Scott Wood 提交于
Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 04 10月, 2011 2 次提交
-
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-