Add led status notification support to the ps/2 kbd driver.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Adds infrastructure for keyboard led status tracking to qemu.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

You're supposed to use scsi-generic for that.  Which rejects anything
but /dev/sg*.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Guest device and host netdev are peers, i.e. it's a 1:1 relation.
However, we fail to enforce that:

    $ qemu -nodefaults --nographic -netdev user,id=net0 -device e1000,netdev=net0 -device virtio-net-pci,netdev=net0 -monitor stdio
    QEMU 0.12.50 monitor - type 'help' for more information
    (qemu) info network
    Devices not on any VLAN:
      net0: net=10.0.2.0, restricted=n peer=virtio-net-pci.0
      e1000.0: model=e1000,macaddr=52:54:00:12:34:56 peer=net0
      virtio-net-pci.0: model=virtio-net-pci,macaddr=52:54:00:12:34:57 peer=net0

It's all downhill from there.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Property "vlan" reports "failed to parse" even when the value parses
just fine, but the result doesn't name an existing VLAN.

Similarly, properties "drive", "chr" and "netdev" misleadingly report
"failed to parse" when the value doesn't name an existing host device.

Change PropertyInfo method parse to return an error code, so that
qdev_prop_parse() can report the error more accurately.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Use the named constant instead of -1.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reported-by: N"Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

net.c used a constant to signify no MSI vectors were specified. Extend
that to all qdev devices.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reported-by: N"Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

According to AMD document 21485D pp.141, APROMWE is bit 8 of BCR2.
Signed-off-by: NChristopher Kilgour <techie@whiterocker.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Want share them with vnc and spice.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NIzik Eidus <ieidus@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Emitted whenever the RTC time changes.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Now we can say it's useful, the following changes have been made:

- Put events in alphabetical order
- Add examples to all events
- Document all 'data' members
- Small corrections and cleanups
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This event has been introduced in the first round of QMP commits,
turns out that it's based on the usage of the EXCP_DEBUG macro,
which has discussable semantics when exposed through QMP.

As libvirt doesn't use this, let's just drop it.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Nothing will change as that function is currently only called by
the main loop code, but it's the right place for the RESET event,
as it's where the reset is actually performed.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

I've introduced the STOP event in the main loop, this is wrong
as it will be only emitted if the io thread is enabled.

This fixes that by moving the STOP event to do_vm_stop().
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The next commit will move the STOP event into do_vm_stop(), to
have the expected event sequence we need to emit the I/O error
event before calling vm_stop().

The expected sequence is:

{ "event": "BLOCK_IO_ERROR" [...] }
{ "event": "STOP" }
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch application failed.  My patch adds a cb() call in
do_balloon(), but the change in git has added the cb() call to
do_info_balloon().  That is causing qemu segfaults.  Applying the
following should correct the damage.  Thanks.

Fix for commit: 5c366a8a

The cb() call is needed in do_balloon(), not do_info_balloon().
Signed-off-by: NAdam Litke <agl@us.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It might not be obvious what "grab" is.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It has been broken by commit 977b6b91.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

See also 8167ee88,
530e7615 and
fad6cb1a.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Value stored to 'mask' is never read.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Value stored to 'bSign' is never read.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Although the value stored to 'r' is used in the enclosing expression,
the value is never actually read from 'r'.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Value stored during initialization is never read.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Value stored is never read.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Value stored is never read.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

There's a return missing in the srs handling which leads to srs always being
treated an an invalid op.
Signed-off-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The combination of keymap support (-k option) and curses is currently
very broken.  The patch below fixes it by first extending keymap support
to interpret the shift, ctrl, altgr and addupper keywords in keymaps,
and to fix curses into properly using keymaps.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>

The relative URLs do not work when cloning a fork of qemu or when
cloning from the Savannah URL.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

To create html output from texi input, texi2html was used.
Output from makeinfo looks cleaner, so replace the old rule
and use makeinfo now.

For those who want to use their own variant of html output,
the macros MAKEINFO and MAKEINFOFLAGS allow customisation.
Option "-I ." is not needed (the current directory is
searched by default), so remove it.

Please note that the build requirements changed, too:
makeinfo is required for doc builds.
texi2html is no longer used.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

-c option needs argument <dev> but it's missing now.
This patch fixes it.
Signed-off-by: NRyota Ozaki <ozaki.ryota@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The OHCI emulation isn't obviously broken and there are people who want to use
it. Let's build it by default so that it can be enabled via -device.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Disable the MULTIPORT feature and MSI vectors for the 0.12 machine
types; those features are added only for 0.13 onwards.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add a 0.12 machine type for compatibility with older versions. Mark the
default one as 0.13.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Commit 428c149b modified the argument
that virtio_blk_init takes. Update the s390 bus code that calls this
function.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

If the parser fails to parse the key in parse_pair, it will access a NULL
pointer. A simple way to trigger this is sending {foo} via QMP. This patch
turns the segfault into a syntax error reply.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

UART_IIR_THRI is not a mask, but a possible value for the IIR ID.
Use UART_IIR_ID to extract this value.

Broken by commit 71e605f8.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

As "todo" comment in source code.
And modify restore_sigcontext() to have three args as kernel's does.
Signed-off-by: NTakashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>