- 12 5月, 2010 1 次提交
-
-
由 Marcelo Tosatti 提交于
Fallback to qemu_vmalloc in case file_ram_alloc fails. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 11 5月, 2010 11 次提交
-
-
由 Markus Armbruster 提交于
Remove bogus entries "count", "format" and "size". Accidentally added in commit 70fcbbe7. Add missing entry "qmp_capabilities". Was forgotten in commit 4a7e1190. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Broken in commit 2313086a. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Commit 15dfcd45 added acl_add and acl_reset, but fat-fingered their documentation to read acl_allow and acl_remove. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Commit f3546deb replaced host_net_redir by hostfwd_add, hostfwd_remove, but neglected to update documentation. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
We must not store references to selected devices as they may be hot-removed. Instead, look up the device based on its tag right before using it. If the device disappeared, throw an interrupt and disconnect. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
According to the LSI spec, the reset value of dcmd, dstat, and ctest2 were wrong, and sdid as well as ssid require zero initialization. There are surely more discrepancies, this is just another increment. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Declare the input message queue empty and initialize the related state machine properly on controller reset. This fixes unrecoverable errors when the controller was reset during ongoing requests. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Once the I/O completion callback returned, aiocb will be released by the controller. So we have to clear the reference not only in scsi_write_complete, but also in scsi_read_complete. Otherwise we risk inconsistencies when a reset hits us before the related request is released. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
Ensure that pending requests of an SCSI disk are purged on system reset and also restore max_lba. The latter is no only present in the reset handler as that one is called after init as well. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Amit Shah 提交于
The iov functions can be useful to other code as well. Signed-off-by: NAmit Shah <amit.shah@redhat.com> CC: Christoph Hellwig <hch@lst.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Corentin Chary 提交于
message is a hint by the client as to its preference (the first encoding specified being most preferred)" Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 10 5月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Recalculate Sparc64 CPU flags on interrupts, otherwise some earlier flags could be stored to pstate. Refactor PSR/CCR/CWP handling: concentrate the actual functions to op_helper.c. Thanks to Igor Kovalenko for reporting. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 09 5月, 2010 2 次提交
-
-
由 Blue Swirl 提交于
Calculate only the carry flag for ADDX/SUBX instead of full set of flags. Thanks to Igor Kovalenko for spotting a bug with an earlier version. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Stefan Weil 提交于
mips_abi_choices and mips_arch_choices are only used locally. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 08 5月, 2010 7 次提交
-
-
由 Stefan Weil 提交于
tcg_out_reloc is only used locally (in */target.c which is included in tcg.c). Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Kevin Wolf 提交于
OpenBSDs gcc is said to generate warnings for this declaration, so don't reference bdrv_qcow2 directly, but look it up using bdrv_find_format. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Kevin Wolf 提交于
This reverts commit 20d97356. The BlockDriver definition should stay at the end of source files. Conflicts: block/qcow2.c Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Richard Henderson 提交于
Implement the "functions may be omitted with NULL pointer" interface mentioned in the function block comment by transforming NULL entries in the read/write arrays into calls to the unassigned_mem family of functions. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Stefan Weil 提交于
Function usage is only used locally, so add "static". Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Stefan Weil 提交于
Function usage() is only used locally. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
Fix errors missed in 2065061e: CC sparc64-softmmu/helper.o cc1: warnings being treated as errors /src/qemu/target-sparc/helper.c: In function 'get_physical_address': /src/qemu/target-sparc/helper.c:426: warning: 'context' may be used uninitialized in this function /src/qemu/target-sparc/helper.c:426: note: 'context' was declared here Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 07 5月, 2010 3 次提交
-
-
由 Igor V. Kovalenko 提交于
- increase max supported MMU modes to 6 - handle nucleus context asi - handle secondary context asi - handle non-faulting loads from secondary context Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Igor V. Kovalenko 提交于
- match global tte against any context - show global tte in MMU dump v0->v1: added default case to switch statement in demap_tlb - should fix gcc warning about uninitialized context variable Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Igor V. Kovalenko 提交于
Signed-off-by: NIgor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 06 5月, 2010 2 次提交
-
-
由 Michael S. Tsirkin 提交于
exec.c has a comment 'XXX: optimize' for lduw_phys/stw_phys, so let's do it, along the lines of stl_phys. The reason to address 16 bit accesses specifically is that virtio relies on these accesses to be done atomically, using memset as we do now breaks this assumption, which is reported to cause qemu with kvm to read wrong index values under stress. https://bugzilla.redhat.com/show_bug.cgi?id=525323Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 05 5月, 2010 9 次提交
-
-
由 Paul Brook 提交于
Avoid loading linux-user applications in address space already used/reserved by the host. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
由 Paul Brook 提交于
The usermode PAGE_RESERVED code is not required by the current mmap implementation, and is already broken when guest_base != 0. Unfortunately the bsd emulation still uses the old mmap implementation, so we can't rip it out altogether. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
由 Paul Brook 提交于
Linux AIO is aonly used by system emulation, so should not be linked into the userspace emulatior. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
由 Richard Henderson 提交于
When -d cpu logging was handled by target-foo/translate.c, it was controled by DEBUG_DISAS, which is enabled by default. Use the same condition in cpu_exec. At the same time, reduce the if-deffery by assuming no flags update is required for the target. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Logging for -d cpu is done in generic code. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Logging for -d cpu is done in generic code. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
Logging for -d cpu is done in generic code. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Richard Henderson 提交于
The proper logging for -d cpu is done in generic code. Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Blue Swirl 提交于
Fix breakage by 04c9a0cb. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 04 5月, 2010 4 次提交
-
-
由 Anthony Liguori 提交于
Commit 37c34d9d introduced a regression when using relative mouse mode with a client that understands the PointerTypeChange pseudo-encoding. Reported-by: NMarcelo Tosatti <mtosatti@redhat.com> Reported-by: NGerhard Wiesinger <lists@wiesinger.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Bernhard M. Wiedemann 提交于
updated version of an old patch http://xenon.stanford.edu/~eswierk/misc/qemu-linuxbios/qemu-piix-ram-size.patch that together with http://www.mail-archive.com/linuxbios@linuxbios.org/msg02390.html (which is already in coreboot trunk) allows coreboot to autodetect the amount of RAM within qemu/kvm from a register in i440 northbridge. The message on the old patch states: Unfortunately the current version of qemu does not set these registers, but I have patched qemu so that it emulates the i440 more faithfully in this regard. Signed-off-by: NBernhard M. Wiedemann <qemudevbmw@lsmod.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Naphtali Sprei 提交于
Current code of monitor command: 'change', used to open file for read-write uncoditionally. Change to open it as read-only for CDROM, and read-write for all others. Signed-off-by: NNaphtali Sprei <nsprei@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Nathan Froyd 提交于
With three different make binaries I have available, configuring a pristine QEMU tree and attempting to make gives the cryptic: Makefile:27: *** missing separator. Stop. This patch fixes it (presumably because it makes the output of `set-vpath' be an empty string, rather than a bit of whitespace), but I don't understand why this hasn't been a problem for other folks before. Signed-off-by: NNathan Froyd <froydnj@codesourcery.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-