提交 · 5e97b623c254a2c7b1f67b21f7aede93d995f4bd · openeuler / qemu

09 1月, 2015 2 次提交

hw/machine: added machine_usb wrapper · 5e97b623

由 Marcel Apfelbaum 提交于 1月 06, 2015

Following QOM convention, object properties should
not be accessed directly.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Message-id: 1420550957-22337-3-git-send-email-marcel@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

5e97b623

hw/ppc: modified the condition for usb controllers to be created for some ppc machines · f8b6f8ed

由 Marcel Apfelbaum 提交于 1月 06, 2015

Some ppc machines create a default usb controller based on a 'machine condition'.
Until now the logic was: create the usb controller if:
 -  the usb option was supplied in cli and value is true or
 -  the usb option was absent and both set_defaults and the machine
    condition were true.

Modified the logic to:
Create the usb controller if:
 - the machine condition is true and defaults are enabled or
 - the usb option is supplied and true.

The main for this is to simplify the usb_enabled method.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Message-id: 1420550957-22337-2-git-send-email-marcel@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

f8b6f8ed

23 12月, 2014 38 次提交

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20141223' into staging · ab0302ee

由 Peter Maydell 提交于 12月 23, 2014

target-arm queue:
 * enable 32-bit EL3 (TrustZone) for vexpress and virt boards
 * add fw_cfg device to virt board for UEFI firmware config
 * support passing commandline kernel/initrd to firmware

# gpg: Signature made Tue 23 Dec 2014 13:50:33 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20141223: (31 commits)
  hw/arm/virt: enable passing of EFI-stubbed kernel to guest UEFI firmware
  hw/arm: pass pristine kernel image to guest firmware over fw_cfg
  hw/loader: split out load_image_gzipped_buffer()
  arm: add fw_cfg to "virt" board
  fw_cfg_mem: expose the "data_width" property with fw_cfg_init_mem_wide()
  fw_cfg_mem: introduce the "data_width" property
  exec: allows 8-byte accesses in subpage_ops
  fw_cfg_mem: flip ctl_mem_ops and data_mem_ops to DEVICE_BIG_ENDIAN
  fw_cfg_mem: max access size and region size are the same for data register
  fw_cfg: move boards to fw_cfg_init_io() / fw_cfg_init_mem()
  fw_cfg: hard separation between the MMIO and I/O port mappings
  target-arm: add cpu feature EL3 to CPUs with Security Extensions
  target-arm: Disable EL3 on unsupported machines
  target-arm: Breakout integratorcp and versatilepb cpu init
  target-arm: Set CPU has_el3 prop during virt init
  target-arm: Enable CPU has_el3 prop during VE init
  target-arm: Add arm_boot_info secure_boot control
  target-arm: Add ARMCPU secure property
  target-arm: Add feature unset function
  target-arm: Add virt machine secure property
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ab0302ee

Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20141222.0' into staging · 03de06dd

由 Peter Maydell 提交于 12月 23, 2014

VFIO updates:
- Conversion to tracepoints (Eric Auger)
- Fix memory listener address space (Frank Blaschka)
- Move to hw/vfio/ and split common vs pci (Eric Auger & Kim Phillips)
- Trivial error_report() fixes (Alex Williamson)

In addition to enabling S390 with the address space fix and updating
to use tracepoints rather than compile time debug, this set of patches
moves hw/misc/vfio.c to hw/vfio/ and paves the way for vfio-platform
support by splitting common functionality from PCI specific code.

# gpg: Signature made Mon 22 Dec 2014 20:19:43 GMT using RSA key ID 3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg:                 aka "Alex Williamson <alex@shazbot.org>"
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>"
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>"

* remotes/awilliam/tags/vfio-update-20141222.0:
  vfio: Cleanup error_report()s
  hw/vfio: create common module
  hw/vfio/pci: use name field in format strings
  hw/vfio/pci: rename group_list into vfio_group_list
  hw/vfio/pci: split vfio_get_device
  hw/vfio/pci: Introduce VFIORegion
  hw/vfio/pci: handle reset at VFIODevice
  hw/vfio/pci: add type, name and group fields in VFIODevice
  hw/vfio/pci: introduce minimalist VFIODevice with fd
  hw/vfio/pci: generalize mask/unmask to any IRQ index
  hw/vfio/pci: Rename VFIODevice into VFIOPCIDevice
  vfio: move hw/misc/vfio.c to hw/vfio/pci.c Move vfio.h into include/hw/vfio
  vfio: fix adding memory listener to the right address space
  vfio: migration to trace points
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

03de06dd

hw/arm/virt: enable passing of EFI-stubbed kernel to guest UEFI firmware · aa351061

由 Laszlo Ersek 提交于 12月 22, 2014

The virt board already ensures mutual exclusion between -bios and -pflash
unit#0; we only need to set "bootinfo.firmware_loaded", introduced in the
previous patch, if either of those options was used to load the guest
firmware.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-12-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

aa351061

hw/arm: pass pristine kernel image to guest firmware over fw_cfg · 07abe45c

由 Laszlo Ersek 提交于 12月 22, 2014

Introduce the new boolean field "arm_boot_info.firmware_loaded". When this
field is set, it means that the portion of guest DRAM that the VCPU
normally starts to execute, or the pflash chip that the VCPU normally
starts to execute, has been populated by board-specific code with
full-fledged guest firmware code, before the board calls
arm_load_kernel().

Simultaneously, "arm_boot_info.firmware_loaded" guarantees that the board
code has set up the global firmware config instance, for arm_load_kernel()
to find with fw_cfg_find().

Guest kernel (-kernel) and guest firmware (-bios, -pflash) has always been
possible to specify independently on the command line. The following cases
should be considered:

nr  -bios    -pflash  -kernel  description
             unit#0
--  -------  -------  -------  -------------------------------------------
1   present  present  absent   Board code rejects this case, -bios and
    present  present  present  -pflash unit#0 are exclusive. Left intact
                               by this patch.

2   absent   absent   present  Traditional kernel loading, with qemu's
                               minimal board firmware. Left intact by this
                               patch.

3   absent   present  absent   Preexistent case for booting guest firmware
    present  absent   absent   loaded with -bios or -pflash. Left intact
                               by this patch.

4   absent   absent   absent   Preexistent case for not loading any
                               firmware or kernel up-front. Left intact by
                               this patch.

5   present  absent   present  New case introduced by this patch: kernel
    absent   present  present  image is passed to externally loaded
                               firmware in unmodified form, using fw_cfg.

An easy way to see that this patch doesn't interfere with existing cases
is to realize that "info->firmware_loaded" is constant zero at this point.
Which makes the "outer" condition unchanged, and the "inner" condition
(with the fw_cfg-related code) dead.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-11-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

07abe45c

hw/loader: split out load_image_gzipped_buffer() · 7d48a0f7

由 Laszlo Ersek 提交于 12月 22, 2014

In the next patch we'd like to reuse the image decompression facility
without installing the output as a ROM at a specific guest-phys address.

In addition, expose LOAD_IMAGE_MAX_GUNZIP_BYTES, because that's a
straightforward "max_sz" argument for the new load_image_gzipped_buffer().
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-10-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

7d48a0f7

arm: add fw_cfg to "virt" board · 578f3c7b

由 Laszlo Ersek 提交于 12月 22, 2014

fw_cfg already supports exposure over MMIO (used in ppc/mac_newworld.c,
ppc/mac_oldworld.c, sparc/sun4m.c); we can easily add it to the "virt"
board.

Because MMIO access is slow on ARM KVM, we enable the guest, with
fw_cfg_init_mem_wide(), to transfer up to 8 bytes with a single access.
This has been measured to speed up transfers up to 7.5-fold, relative to
single byte data access, on both ARM KVM and x86_64 TCG.

The MMIO register block of fw_cfg is advertized in the device tree. As
base address we pick 0x09020000, which conforms to the comment preceding
"a15memmap": it falls in the miscellaneous device I/O range 128MB..256MB,
and it is aligned at 64KB. The DTB properties follow the documentation in
the Linux source file "Documentation/devicetree/bindings/arm/fw-cfg.txt".

fw_cfg automatically exports a number of files to the guest; for example,
"bootorder" (see fw_cfg_machine_reset()).
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-9-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

578f3c7b

fw_cfg_mem: expose the "data_width" property with fw_cfg_init_mem_wide() · 6c87e3d5

由 Laszlo Ersek 提交于 12月 22, 2014

We rebase fw_cfg_init_mem() to the new function for compatibility with
current callers.

The behavior of the (big endian) multi-byte data reads is best shown
with a qtest session.  Here, we are reading the first six bytes of
the UUID

    $ arm-softmmu/qemu-system-arm -M virt -machine accel=qtest \
         -qtest stdio -uuid 4600cb32-38ec-4b2f-8acb-81c6ea54f2d8
>>> writew 0x9020008 0x0200
<<< OK
>>> readl 0x9020000
<<< OK 0x000000004600cb32

Remember this is big endian.  On big endian machines, it is stored
directly as 0x46 0x00 0xcb 0x32.

On a little endian machine, we have to first swap it, so that it becomes
0x32cb0046.  When written to memory, it becomes 0x46 0x00 0xcb 0x32
again.

Reading byte-by-byte works too, of course:

>>> readb 0x9020000
<<< OK 0x0000000000000038
>>> readb 0x9020000
<<< OK 0x00000000000000ec

Here only a single byte is read at a time, so they are read in order
similar to the 1-byte data port that is already in PPC and SPARC
machines.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-8-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

6c87e3d5

fw_cfg_mem: introduce the "data_width" property · cfaadf0e

由 Laszlo Ersek 提交于 12月 22, 2014

The "data_width" property is capable of changing the maximum valid access
size to the MMIO data register, and resizes the memory region similarly,
at device realization time.

The default value of "data_memwidth" is set so that we don't yet diverge
from "fw_cfg_data_mem_ops".

Most of the fw_cfg_mem users will stick with the default, and for them we
should continue using the statically allocated "fw_cfg_data_mem_ops". This
is beneficial for debugging because gdb can resolve pointers referencing
static objects to the names of those objects.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-7-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

cfaadf0e

exec: allows 8-byte accesses in subpage_ops · ff6cff75

由 Paolo Bonzini 提交于 12月 22, 2014

Otherwise fw_cfg accesses are split into 4-byte ones before they reach the
fw_cfg ops / handlers.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-6-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ff6cff75

fw_cfg_mem: flip ctl_mem_ops and data_mem_ops to DEVICE_BIG_ENDIAN · d789c845

由 Laszlo Ersek 提交于 12月 22, 2014

The standalone selector port (fw_cfg_ctl_mem_ops) is only used by big
endian guests to date (*), hence this change doesn't regress them. Paolo
and Alex have suggested / requested an explicit DEVICE_BIG_ENDIAN setting
here, for clarity.

(*) git grep -l fw_cfg_init_mem

    hw/nvram/fw_cfg.c
    hw/ppc/mac_newworld.c
    hw/ppc/mac_oldworld.c
    hw/sparc/sun4m.c
    include/hw/nvram/fw_cfg.h

The standalone data port (fw_cfg_data_mem_ops) has max_access_size 1 (for
now), hence changing its endianness doesn't change behavior for existing
guest code.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-5-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

d789c845

fw_cfg_mem: max access size and region size are the same for data register · 86099db3

由 Laszlo Ersek 提交于 12月 22, 2014

Make it clear that the maximum access size to the MMIO data register
determines the full size of the memory region.

Currently the max access size is 1.

This patch doesn't change behavior.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-4-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

86099db3

fw_cfg: move boards to fw_cfg_init_io() / fw_cfg_init_mem() · 66708822

由 Laszlo Ersek 提交于 12月 22, 2014

This allows us to drop the fw_cfg_init() shim and to enforce the possible
mappings at compile time.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-3-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

66708822

fw_cfg: hard separation between the MMIO and I/O port mappings · 5712db6a

由 Laszlo Ersek 提交于 12月 22, 2014

We are going to introduce a wide data register for fw_cfg, but only for
the MMIO mapped device. The wide data register will also require the
tightening of endiannesses.

However we don't want to touch the I/O port mapped fw_cfg device at all.

Currently QEMU provides a single fw_cfg device type that can handle both
I/O port and MMIO mapping. This flexibility is not actually exploited by
any board in the tree, but it renders restricting the above changes to
MMIO very hard.

Therefore, let's derive two classes from TYPE_FW_CFG: TYPE_FW_CFG_IO and
TYPE_FW_CFG_MEM.

TYPE_FW_CFG_IO incorporates the base I/O port and the related combined
MemoryRegion. (NB: all boards in the tree that use the I/O port mapped
flavor opt for the combined mapping; that is, when the data port overlays
the high address byte of the selector port. Therefore we can drop the
capability to map those I/O ports separately.)

TYPE_FW_CFG_MEM incorporates the base addresses for the MMIO selector and
data registers, and their respective MemoryRegions.

The "realize" and "props" class members are specific to each new derived
class, and become unused for the base class. The base class retains the
"reset" member and the "vmsd" member, because the reset functionality and
the set of migrated data are not specific to the mapping.

The new functions fw_cfg_init_io() and fw_cfg_init_mem() expose the
possible mappings in separation. For now fw_cfg_init() is retained as a
compatibility shim that enforces the above assumptions.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1419250305-31062-2-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

5712db6a

target-arm: add cpu feature EL3 to CPUs with Security Extensions · c0ccb02d

由 Fabian Aggeler 提交于 12月 15, 2014

Set ARM_FEATURE_EL3 feature for CPUs that implement Security Extensions.
Signed-off-by: NFabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: NGreg Bellows <greg.bellows@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-16-git-send-email-greg.bellows@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

c0ccb02d

target-arm: Disable EL3 on unsupported machines · 61e2f352