target-arm: Merge EL3 CP15 register lists

Merge of the v8_el2_cp_reginfo and el3_cp_reginfo ARMCPRegInfo lists.
Previously, some EL3 registers were restricted to the ARMv8 list under the
impression that they were not needed on ARMv7.  However, this is not the case
as the ARMv7/32-bit variants rely on the ARMv8/64-bit variants to handle
migration and reset.  For this reason they must always exist.
Signed-off-by: NGreg Bellows <greg.bellows@linaro.org>
Message-id: 1418406450-14961-1-git-send-email-greg.bellows@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm/helper.c

@@ -2413,7 +2413,30 @@ static const ARMCPRegInfo v8_el2_cp_reginfo[] = {
     REGINFO_SENTINEL
 };
 
-static const ARMCPRegInfo v8_el3_cp_reginfo[] = {
+static const ARMCPRegInfo el3_cp_reginfo[] = {
+    { .name = "SCR_EL3", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 0,
+      .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.scr_el3),
+      .resetvalue = 0, .writefn = scr_write },
+    { .name = "SCR",  .type = ARM_CP_NO_MIGRATE,
+      .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 0,
+      .access = PL3_RW, .fieldoffset = offsetoflow32(CPUARMState, cp15.scr_el3),
+      .resetfn = arm_cp_reset_ignore, .writefn = scr_write },
+    { .name = "SDER32_EL3", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 1,
+      .access = PL3_RW, .resetvalue = 0,
+      .fieldoffset = offsetof(CPUARMState, cp15.sder) },
+    { .name = "SDER",
+      .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 1,
+      .access = PL3_RW, .resetvalue = 0,
+      .fieldoffset = offsetoflow32(CPUARMState, cp15.sder) },
+      /* TODO: Implement NSACR trapping of secure EL1 accesses to EL3 */
+    { .name = "NSACR", .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 2,
+      .access = PL3_W | PL1_R, .resetvalue = 0,
+      .fieldoffset = offsetof(CPUARMState, cp15.nsacr) },
+    { .name = "MVBAR", .cp = 15, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1,
+      .access = PL3_RW, .writefn = vbar_write, .resetvalue = 0,
+      .fieldoffset = offsetof(CPUARMState, cp15.mvbar) },
     { .name = "SCTLR_EL3", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 0, .opc2 = 0,
       .access = PL3_RW, .raw_writefn = raw_write, .writefn = sctlr_write,
@@ -2451,33 +2474,6 @@ static const ARMCPRegInfo v8_el3_cp_reginfo[] = {
     REGINFO_SENTINEL
 };
 
-static const ARMCPRegInfo el3_cp_reginfo[] = {
-    { .name = "SCR_EL3", .state = ARM_CP_STATE_AA64,
-      .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 0,
-      .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.scr_el3),
-      .resetvalue = 0, .writefn = scr_write },
-    { .name = "SCR",  .type = ARM_CP_NO_MIGRATE,
-      .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 0,
-      .access = PL3_RW, .fieldoffset = offsetoflow32(CPUARMState, cp15.scr_el3),
-      .resetfn = arm_cp_reset_ignore, .writefn = scr_write },
-    { .name = "SDER32_EL3", .state = ARM_CP_STATE_AA64,
-      .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 1,
-      .access = PL3_RW, .resetvalue = 0,
-      .fieldoffset = offsetof(CPUARMState, cp15.sder) },
-    { .name = "SDER",
-      .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 1,
-      .access = PL3_RW, .resetvalue = 0,
-      .fieldoffset = offsetoflow32(CPUARMState, cp15.sder) },
-      /* TODO: Implement NSACR trapping of secure EL1 accesses to EL3 */
-    { .name = "NSACR", .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 2,
-      .access = PL3_W | PL1_R, .resetvalue = 0,
-      .fieldoffset = offsetof(CPUARMState, cp15.nsacr) },
-    { .name = "MVBAR", .cp = 15, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1,
-      .access = PL3_RW, .writefn = vbar_write, .resetvalue = 0,
-      .fieldoffset = offsetof(CPUARMState, cp15.mvbar) },
-    REGINFO_SENTINEL
-};
-
 static CPAccessResult ctr_el0_access(CPUARMState *env, const ARMCPRegInfo *ri)
 {
     /* Only accessible in EL0 if SCTLR.UCT is set (and only in AArch64,
@@ -3077,9 +3073,6 @@ void register_cp_regs_for_features(ARMCPU *cpu)
         }
     }
     if (arm_feature(env, ARM_FEATURE_EL3)) {
-        if (arm_feature(env, ARM_FEATURE_V8)) {
-            define_arm_cp_regs(cpu, v8_el3_cp_reginfo);
-        }
         define_arm_cp_regs(cpu, el3_cp_reginfo);
     }
     if (arm_feature(env, ARM_FEATURE_MPU)) {