- 16 6月, 2015 19 次提交
-
-
由 Peter Crosthwaite 提交于
These registers are VMSA specific so they should be conditional on VMSA (i.e. !MPU). Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 7bb8843e45f2635c6b7a583c5bb5da51ed4442a0.1434066412.git.peter.crosthwaite@xilinx.com Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Crosthwaite 提交于
If doing a PMSA (MPU) system do not define the VMSA specific TLBTR CP. The def is done separately from VMSA registers group as it is affected by both the OMAP/STRONGARM RW errata and the MIDR backgrounding. Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: b03fea3840207edf633f5c9189400c3dd6a28d14.1434066412.git.peter.crosthwaite@xilinx.com Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Aurelio C. Remonda 提交于
Create an ARM_FEATURE_THUMB_DSP controlling the Thumb encodings of the 85 DSP instructions (these are all Thumb2). This is enabled for all non-M-profile CPUs with Thumb2 support, as the instructions are mandatory for R and A profiles. On M profile they are optional and not present in the Cortex-M3 (though they are in the M4). The effect of this commit is that we will now treat the DSP encodings as illegal instructions on M3, when previously we incorrectly implemented them. Signed-off-by: NAurelio C. Remonda <aurelioremonda@gmail.com> Message-id: 1434311355-26554-1-git-send-email-aurelioremonda@gmail.com [PMM: added clz/crc32/crc32c and default case to the early-decode switch; minor format/spacing fixups; reworded commit message a bit] Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
Update the pxa2xx_mmci device to stop using the old_mmio read and write callbacks in its MemoryRegionOps. This actually simplifies the code because the separate byte/halfword/word access functions were all calling into a single function to do the work anyway. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1434117989-7367-6-git-send-email-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
The pxa2xx-ssp device is already a QOM device but is still using the old-style register_savevm(); convert to VMState. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1434117989-7367-5-git-send-email-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
The pxa2xx_ssp device was missing a reset method; add one. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPeter Crosthwaite <peter..crosthwaite@xilinx.com> Message-id: 1434117989-7367-4-git-send-email-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
Convert the pxa2xx-fir device to QOM, including using a VMState for its migration info. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1434117989-7367-3-git-send-email-peter.maydell@linaro.org
-
由 Peter Maydell 提交于
The pxa2xx custom coprocessor registers in cp6 and cp14 do device accesses, so mark the non-constant regs as ARM_CP_IO so that icount works correctly and doesn't abort. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1434117989-7367-2-git-send-email-peter.maydell@linaro.org
-
由 Pavel Fedin 提交于
When we're using KVM, the kernel's internal idea of the MPIDR affinity fields must match the values we tell it for the guest vcpu cluster configuration in the device tree. Since at the moment the kernel doesn't support letting userspace tell it the correct affinity fields to use, we must read the kernel's view and reflect that back in the device tree. Signed-off-by: NShlomo Pongratz <shlomo.pongratz@huawei.com> Signed-off-by: NPavel Fedin <p.fedin@samsung.com> Message-id: 02f601d0a1e6$90c7d630$b2578290$@samsung.com [PMM: Use a local #define rather than a global variable for the TCG ARM_CPUS_PER_CLUSTER setting. Tweak a comment. Update the commit message.] Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Shannon Zhao 提交于
Add Shannon Zhao as the maintainer for the ARM ACPI Subsystem. Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org> Reviewed-by: NClaudio Fontana <claudio.fontana@huawei.com> Acked-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1433248318-6076-1-git-send-email-shannon.zhao@linaro.org Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Sergey Fedorov 提交于
According to ARMv8 ARM, there are additional aliases to MIDR system register in AArch32 state. So add them to the list. Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com> Message-id: 1433321048-23793-3-git-send-email-serge.fdrv@gmail.com Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Sergey Fedorov 提交于
According to ARM Cortex-A53/A57 TRM, REVIDR reset value should be zero. So let REVIDR reset value be specified by CPU model and correct it for Cortex-A53/A57. Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com> Message-id: 1433321048-23793-2-git-send-email-serge.fdrv@gmail.com Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Shannon Zhao 提交于
Add cortex-a53 cpu support in machine virt, so it can be used for TCG and KVM. Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1433207452-4512-3-git-send-email-shannon.zhao@linaro.org Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Shannon Zhao 提交于
Since commit e3531026(target-arm: cpu64: Add support for Cortex-A53) has added Cortex-A53 cpu support for target-arm, this patch just enables it for kvm-arm. Here adding XGENE_POTENZA just makes the enum continuous. Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org> Message-id: 1433207452-4512-2-git-send-email-shannon.zhao@linaro.org [PMM: Don't add the CPU types to cpus_to_try[]; this array only lists old CPUs which were supported in pre-PREFERRED_TARGET kernels] Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Alex Bennée 提交于
This isn't used by any of the code. In fact it looks like it was never used as it came in with ARMv7 support. Signed-off-by: NAlex Bennée <alex.bennee@linaro.org> Message-id: 1434020015-8868-1-git-send-email-alex.bennee@linaro.org Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
fimd_swap_data() includes code to reverse the bits in a 64-bit integer, but an off-by-one error meant that it would try to shift off the top of the integer. Correct the bug (spotted by Coverity). Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1432912615-23107-1-git-send-email-peter.maydell@linaro.org
-
由 Johan Karlsson 提交于
This patch fixes so that gic_update always updates all the cores with new pending irq states. If the function returns early it is possible to get interrupts that has already been acknowledged. Signed-off-by: NJohan Karlsson <johan.karlsson@enea.com> [PMM: rebased to apply to current master] Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Sergey Fedorov 提交于
Since ARMv7 with LPAE support, a supersection short translation table descriptor has had extended base address fields which hold bits 39:32 of translated address. These fields are IMPDEF in ARMv6 and ARMv7 without LPAE support. Signed-off-by: NSergey Fedorov <serge.fdrv@gmail.com> Message-id: 1433235718-30485-1-git-send-email-serge.fdrv@gmail.com Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
The old ARMv5-style page table format includes a kind of second level descriptor named the "extended small page" format, whose primary purpose is to allow specification of the TEX memory attribute bits on a 4K page. This exists on ARMv6 and also (as an implementation extension) on XScale CPUs; it's UNPREDICTABLE on v5. We were mishandling this in two ways: (1) we weren't implementing it for v6 (probably never noticed because Linux will use the new-style v6 page table format there) (2) we were not correctly setting the page_size, which is 4K, not 1K The latter bug went unnoticed for years because the only thing which the page_size affects is which TLB entries get flushed when the guest does a TLB invalidate on an address in the page, and prior to commit 2f0d8631 we were doing a full TLB flush very frequently due to Linux's habit of writing the SCTLR pointlessly a lot. (We can assume that after commit 2f0d8631 the bug went unnoticed for a year because nobody's actually using the Zaurus/XScale emulation...) Report the correct page size for these descriptors, and permit them on ARMv6 CPUs. This fixes a problem where a kernel image for Zaurus can boot the kernel OK but gets random segfaults when it tries to run userspace programs. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Message-id: 1432844085-16441-1-git-send-email-peter.maydell@linaro.org
-
- 15 6月, 2015 21 次提交
-
-
由 Peter Maydell 提交于
audio: remove obsolete backends (esd, fmod, winwave). audio: stop using global variables, small fixes. audio: remove some obsolte and unused code. # gpg: Signature made Mon Jun 15 13:24:44 2015 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-audio-20150615-1: ossaudio: use trace events instead of debug config flag alsaaudio: use trace events instead of verbose dsoundaudio: remove primary buffer dsoundaudio: remove *_retries kludges audio: remove plive audio: remove LOG_TO_MONITOR along with default_mon MAINTAINERS: remove malc from audio sdlaudio: do not allow multiple instances coreaudio: do not use global variables where possible dsoundaudio: do not use global variables paaudio: fix possible resource leak wavaudio: do not use global variables ossaudio: do not use global variables alsaaudio: do not use global variables paaudio: do not use global variables audio: expose drv_opaque to init_out and init_in only enable dsound in case the header file is present audio: remove winwave audio driver audio: remove fmod backend audio: remove esd backend Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
s390x/kvm/watchdog 1. Implement a diag288 based watchdog 2. Fix virtio-ccw BIOS for gcc >= 4.9 # gpg: Signature made Mon Jun 15 12:36:25 2015 BST using RSA key ID B5A61C7C # gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" * remotes/borntraeger/tags/s390x-20150615: s390/bios: build with -fdelete-null-pointer-checks watchdog: Add new Virtual Watchdog action INJECT-NMI nmi: Implement inject_nmi() for non-monitor context use s390x/watchdog: diag288 migration support s390x/kvm: diag288 instruction interception and handling s390x/watchdog: introduce diag288 watchdog device watchdog: change option wording to allow for more watchdogs Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Aurelien Jarno 提交于
Starting with version 4.9, GCC assumes it can't safely dereference null pointers, and uses this for some optimizations. On s390, the lowcore memory is located at address 0, so this assumption is wrong and breaks the s390-ccw firmware. Pass -fdelete-null-pointer-checks to avoid that. Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Alexander Graf <agraf@suse.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Message-Id: <1434363843-14576-1-git-send-email-aurelien@aurel32.net> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Kővágó, Zoltán 提交于
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Kővágó, Zoltán 提交于
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Kővágó, Zoltán 提交于
Enabling this option just creates a playback buffer with the specified settings, and then ignores it. It's probably some outdated hack to set audio formats on windows. (The first created stream dictates all other streams settings, at least on some Windows versions). Setting DAC_FIXED_SETTINGS should have the same effect as setting (the now removed) primary buffer. Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Kővágó, Zoltán 提交于
According to MSDN this may happen when the window is not in the foreground, but the default is 1 since a long time (which means no retries), so it should be ok. I've found no problems during testing it on Windows 7 and wine, so this was probably only the case with some old Windows versions. Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Kővágó, Zoltán 提交于
It was useless even 3 years ago, so it can probably safely go away: https://lists.nongnu.org/archive/html/qemu-devel/2012-03/msg02427.htmlSigned-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Kővágó, Zoltán 提交于
Setting QEMU_AUDIO_LOG_TO_MONITOR=1 can crash qemu (if qemu tries to log to the monitor before it's being initialized), and also nothing else in qemu logs to the monitor. This log to monitor feature was the last thing that used the default_mon variable, so I removed it too (as using it can cause problems). Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
email bounces, with a appearently permanent error: "av1474@comtv.ru mail receiving disabled, rejecting" Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Reviewed-by: NGonglei <arei.gonglei@huawei.com>
-
由 Kővágó, Zoltán 提交于
Since SDL uses a lot of global data, we can't create independent instances of sdl audio backend. Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Kővágó, Zoltán 提交于
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Kővágó, Zoltán 提交于
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Kővágó, Zoltán 提交于
qpa_audio_init did not clean up resources properly if the initialization failed. This hopefully fixes it. Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Kővágó, Zoltán 提交于
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Kővágó, Zoltán 提交于
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Kővágó, Zoltán 提交于
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Kővágó, Zoltán 提交于
Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Kővágó, Zoltán 提交于
Currently the opaque pointer returned by audio_driver's init is only exposed to the driver's fini, but not to audio_pcm_ops. This way if someone wants to share a variable with the driver and the pcm, he must use global variables. This patch fixes it by adding a third parameter to audio_pcm_op's init_out and init_in. Signed-off-by: NKővágó, Zoltán <DirtY.iCE.hu@gmail.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Peter Maydell 提交于
Block layer core and image format patches # gpg: Signature made Fri Jun 12 16:08:53 2015 BST using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: (25 commits) block: Fix reopen flag inheritance block: Add BlockDriverState.inherits_from block: Add list of children to BlockDriverState queue.h: Add QLIST_FIX_HEAD_PTR() block: Drain requests before swapping nodes in bdrv_swap() block: Move flag inheritance to bdrv_open_inherit() block: Use QemuOpts in bdrv_open_common() block: Use macro for cache option names vmdk: Use bdrv_open_image() quorum: Use bdrv_open_image() check-qdict: Test cases for new functions qdict: Add qdict_{set,copy}_default() qdict: Add qdict_array_entries() iotests: Add tests for overriding BDRV_O_PROTOCOL block: driver should override flags in bdrv_open() block: Change bitmap truncate conditional to assertion block: record new size in bdrv_dirty_bitmap_truncate raw-posix: Fix .bdrv_co_get_block_status() for unaligned image size vmdk: Use vmdk_find_index_in_cluster everywhere vmdk: Fix index_in_cluster calculation in vmdk_co_get_block_status ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-