Starting with commit 1c380f94 dma
transfers can actually fail.  This patch makes ehci keep track
of the busmaster bit in pci config space, by setting/clearing the
dma_context pointer.  Attempts to dma without context will result
in raising HSE (Host System Error) interrupt and stopping the host
controller.

This patch fixes WinXP not booting with a usb stick attached to ehci.
Root cause is seabios activating ehci so you can boot from the stick,
and WinXP clearing the busmaster bit before resetting the host
controller, leading to ehci actually trying dma while it is disabled.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Added a trace point for easy logging.

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=870972Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a generic thread-pool.  The code is roughly based on posix-aio-compat.c,
with some changes, especially the following:

- use QemuSemaphore instead of QemuCond;

- separate the state of the thread from the return code of the worker
function.  The return code is totally opaque for the thread pool;

- do not busy wait when doing cancellation.

A more generic threadpool (but still specific to I/O so that in the future
it can use special scheduling classes or PI mutexes) can have many uses:
it allows more flexibility in raw-posix.c and can more easily be extended
to Win32, and it will also be used to do an msync of the persistent bitmap.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

According to the spec a guest can unlink a qh, and then as soon as frindex
has changed by 1 since the unlink, assume it is idle and re-use it. However
for various reasons, we cannot simply consider a qh as unlinked if we've not
seen it for 1 frame. This means that it is possible for a guest to re-use /
restart the queue while we still see its old state. This patch adds a safety
check for this, and "early" retires queues when they were changed by the guest.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch adds the implementation of a new job that mirrors a disk to
a new image while letting the guest continue using the old image.
The target is treated as a "black box" and data is copied from the
source to the target in the background.  This can be used for several
purposes, including storage migration, continuous replication, and
observation of the guest I/O in an external program.  It is also a
first step in replacing the inefficient block migration code that is
part of QEMU.

The job is possibly never-ending, but it is logically structured into
two phases: 1) copy all data as fast as possible until the target
first gets in sync with the source; 2) keep target in sync and
ensure that reopening to the target gets a correct (full) copy
of the source data.

The second phase is indicated by the progress in "info block-jobs"
reporting the current offset to be equal to the length of the file.
When the job is cancelled in the second phase, QEMU will run the
job until the source is clean and quiescent, then it will report
successful completion of the job.

In other words, the BLOCK_JOB_CANCELLED event means that the target
may _not_ be consistent with a past state of the source; the
BLOCK_JOB_COMPLETED event means that the target is consistent with
a past state of the source.  (Note that it could already happen
that management lost the race against QEMU and got a completion
event instead of cancellation).

It is not yet possible to complete the job and switch over to the target
disk.  The next patches will fix this and add many refinements to the
basic idea introduced here.  These include improved error management,
some tunable knobs and performance optimizations.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

While streaming can be dropped as soon as it progressed through the whole
image, mirroring needs to be completed manually for two reasons: 1) so that
management knows exactly when the VM switches to the target; 2) because
for other use cases such as replication, we may leave the operation running
for the whole life of the virtual machine.

Add a new block job command that manually completes background operations.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

Add QMP commands matching the functionality.

Paused jobs cannot be canceled without first resuming them.  This
ensures that I/O errors are never missed by management.  However, an
optional force argument can be specified to allow that.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This adds the live commit coroutine.  This iteration focuses on the
commit only below the active layer, and not the active layer itself.

The behaviour is similar to block streaming; the sectors are walked
through, and anything that exists above 'base' is committed back down
into base.  At the end, intermediate images are deleted, and the
chain stitched together.  Images are restored to their original open
flags upon completion.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Until now we used only the agent to change the monitor count and each
monitor resolution. This patch introduces the qemu part of using the
device as the mediator instead of the agent via virtio-serial.

Spice (>=0.11.5) calls the new QXLInterface::client_monitors_config,
which returns wether the interrupt is enabled, and if so and given a non
NULL monitors config will
generate an interrupt QXL_INTERRUPT_CLIENT_MONITORS_CONFIG with crc
checksum for the guest to verify a second call hasn't interfered.

The maximal number of monitors is limited on the QXLRom to 64.
Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add two new trace events:
qxl_send_events(int qid, uint32_t events) "%d %d"
qxl_set_guest_bug(int qid) "%d"

Change qxl_io_unexpected_vga_mode parameters to be equivalent to those
of qxl_io_write for easier grouping under a single systemtap probe.

Change d to qxl in one place.
Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Also register different memory regions for capabilities,
operational registers and port status registers.  Create
separate tracepoints for operational regs and port status
regs.  Ditch a bunch of sanity checks because the memory
core will do this for us now.

Offloading the byte, word and dword access handling to the
memory core also has the side effect of fixing ehci register
access on bigendian hosts.

Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Move all state belonging to the (single) interrupter into a separate
struct.  First step in adding support for multiple interrupters.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add support for creating BOS descriptor and
device cappability descriptors.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch splits the xhci_xfer_data function into three.
The xhci_xfer_data function used to do does two things:

  (1) copy transfer data between guest memory and a temporary buffer.
  (2) report transfer results to the guest using events.

Now we three functions to handle this:

  (1) xhci_xfer_map creates a scatter list for the transfer and
      uses that (instead of the temporary buffer) to build a
      USBPacket.
  (2) xhci_xfer_unmap undoes the mapping.
  (3) xhci_xfer_report sends out events.

The patch also fixes reporting of transaction errors which must be
reported unconditinally, not only in case the guest asks for it
using the ISP flag.

[ v2: fix warning ]
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

make qemu_queue_{cancel,reset} return the number of packets released,
so the caller can figure whenever there have been active packets even
though there shouldn't have been any.  Add tracepoint to log this.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Revision bumped to 4 for new IO support, enabled for spice-server >=
0.11.1. New io enabled if revision is 4. Revision can be set to 4.

[ kraxel: 3 continues to be the default revision.  Once we have a new
          stable spice-server release and the qemu patches to enable
          the new bits merged we'll go flip the switch and make rev4
          the default ]

This io calls the corresponding new spice api
spice_qxl_monitors_config_async to let spice-server read a new guest set
monitors config and notify the client.

On migration reissue spice_qxl_monitors_config_async.

RHBZ: 770842
Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

fixup
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch implements MSI and MSI-X support for the pseries PCI host
bridge.  To do this it adds:

 * A "config_space_address to msi_table" map, since the MSI RTAS calls
take a PCI config space address as an identifier.

 * A MSIX memory region to catch msi_notify()/msix_notiry() from
virtio-pci and pass them to the guest via qemu_irq_pulse().

 * RTAS call "ibm,change-msi" which sets up MSI vectors for a
device. Note that this call may configure and return lesser number of
vectors than requested.

 * RTAS call "ibm,query-interrupt-source-number" which translates MSI
vector to interrupt controller (XICS) IRQ number.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
[agraf: fix error case ndev < 0]
Signed-off-by: NAlexander Graf <agraf@suse.de>

This adds a trace event in the pseries PCI specific set_irq() function to
assist in debugging.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
[agraf: add trace.h include]
Signed-off-by: NAlexander Graf <agraf@suse.de>

When a device is resized, we will report a unit attention condition
for CAPACITY DATA HAS CHANGED.  However, we should ensure that this
condition does not override a more important unit attention condition.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

trace_megasas_dcmd_dump_frame() takes 9 arguments, which is
rather much. Plus the trace infrastructure doesn't support
it.  As we can get the information via other means it's pointless
to have it in the driver, so rather use some proper trace
point here and remove the old one.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Cc: Stefan Weil <sw@weilnetz.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Best to use the same type, to avoid unwanted truncation or sign
extension.

BlockConf can't use plain int for cyls, heads and secs, because
integer properties require an exact width.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The PCI version is supported in lots of Operating Systems,
and has been successfully tested on:
- MS DOS 6.22 (using DC390 driver)
- MS Windows 3.11 (using DC390 driver)
- MS Windows 98 SE (using default driver)
- MS Windows NT 3.1 (using DC390 driver)
- MS Windows NT 4.0 (using default driver)
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Also reorganize and comment the irq functions while being at it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

$subject says all.  First cut.

It's a pure UAS (usb attached scsi) emulation, without BOT (bulk-only
transport) compatibility.  If your guest can't handle it use usb-storage
instead.

The emulation works like any other scsi hba emulation (eps, lsi, virtio,
megasas, ...).  It provides just the HBA where you can attach scsi
devices as you like using '-device'.  A single scsi target with up to
256 luns is supported.

For now only usb 2.0 transport is supported.  This will change in the
future though as I plan to use this as playground when codeing up &
testing usb 3.0 transport and streams support in the qemu usb core and
the xhci emulation.

No migration support yet.  I'm planning to add usb 3.0 support first as
this probably requires saving additional state.

Special thanks go to Paolo for bringing the qemu scsi emulation into
shape, so this can be added nicely without having to touch a single line
of scsi code.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Replace iso transfer fprintf's with trace points.  Also rename existing
tracepoints so they all match usb_host_iso_*.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch adds an emulation for the LSI Megaraid SAS 8708EM2 HBA.
I've tested it to work with Linux, Windows Vista, and Windows7.
Signed-off-by: NHannes Reinecke <hare@suse.de>
[ Squashed trivial changes from Andreas Faerber, rebased over IOMMU
  and QBus changes - Paolo ]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This allows to know how long each section takes to save.

An awk script like this tells us sections that takes more that 10ms

$1 ~ /savevm_state_iterate_end/ {
	/* Print savevm_section_end line when > 10ms duration */
	if ($2 > 10000) {
		printf("%s times_missing=%u\n", $0, times_missing++);
	}
}
Signed-off-by: NJuan Quintela <quintela@redhat.com>

fix ws tracepoints
Signed-off-by: NJuan Quintela <quintela@redhat.com>