Returns the I/O address space.  Useful for implementing
PCI-ISA bridge devices.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Support bridge filtering on top of the memory
API as suggested by Avi Kivity:

Create a memory region for the bridge's address space.  This region is
not directly added to system_memory or its descendants.  Devices under
the bridge see this region as its pci_address_space().  The region is
as large as the entire address space - it does not take into account
any windows.

For each of the three windows (pref, non-pref, vga), create an alias
with the appropriate start and size.  Map the alias into the bridge's
parent's pci_address_space(), as subregions.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

eepro100 was the last user. Now pci_add_capability is powerful enough.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Returns the PCI address space.  Useful for bridges that can obscure
part of the PCI address space.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

There is only one function, so no need for a function pointer.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Superceded by pci_register_bar_region().  The implementations
are folded together.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Superceded by pci_register_bar_region().
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The msix table is defined as a subregion, to allow for a BAR that
mixes device specific regions with the msix table.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This lets us register BARs in the I/O address space.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Some (hacky) devices that have a back-channel to read this
address back outside the normal configuration mechanisms, such
as VMware svga.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Allow registering a BAR using a MemoryRegion.  Once all users are converted,
pci_register_bar() and pci_register_bar_simple() will be removed.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is now done sloppily, via get_system_memory().  Eventually callers
will be converted to stop using that.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

vender id/device id... in configuration space are read-only registers
which are commonly defined for all pci devices.
So move those initialization into common place.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Replace writeable -> writable
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

This is similar to pci_register_bar(), but automatically registers a single
memory region spanning the entire BAR.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Introduce accessor function to know INTx levels.
It will be used later by q35.
Although piix_pci tracks the intx line levels, it can be eliminated
by this helper function.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

use uint8_t for devfn_min instead of int.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

(slot, fn) pair is somewhat confusing because of ARI.
So use devfn for pci_find_device() instead of (slot, fn).
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Introduce symbol PCI_SLOT_MAX for the # of slots,
and replace the magic, 256.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

deassert intx on device reset.
So far pci_device_reset() is used for system reset.
In that case, interrupt controller is reset at the same time so that
all irq is are deasserted.
But now pci bus reset/flr is supported, and in that case irq needs to be
disabled explicitly.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch adds a field to PCIDeviceInfo to tag devices as being
not hotpluggable.  Any attempt to plug-in or -out such a device
will throw an error.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch introduce a helper function to get PCIDevice from qdev id.
This function will be used later.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Support flr: trigger device reset on flr config write.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

We need a PCI ID for our new AHCI adapter. I just picked an ICH-9
because that's the one in the Q35 chipset.

This patch adds a PCI ID define for an ICH-9 AHCI adapter.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

msi depends on pci but pci should not depend on msi.
The only dependency we have is a recent addition
of pci_msi_ functions, IMO they add little enough to
open-code in the small number of users.

Follow-up patches add more cleanups.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>

pcie aer needs SERR bit to be writable, and the PCI spec requires
this as well.  For compatibility, introduce compat global property
command_serr_enable and make this bit readonly for a pre 0.14 pc
machine.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch fixes hot unplug of cold plugged devices
(those present at system start), which got broken by
5beb8ad5 .
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NCam Macdonell <cam@cs.ualberta.ca>
Tested-by: NCam Macdonell <cam@cs.ualberta.ca>
Reported-by: Cam Macdonell <cam@cs.ualberta.ca>.

This patch fixes hot unplug of cold plugged devices
(those present at system start), which got broken by
5beb8ad5 .
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NCam Macdonell <cam@cs.ualberta.ca>
Tested-by: NCam Macdonell <cam@cs.ualberta.ca>
Reported-by: Cam Macdonell <cam@cs.ualberta.ca>.

This patch implements helper functions for pci express capability
and pci express extended capability allocation.
NOTE: presence detection depends on pci_qdev_init() change.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

implements msi related functions.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

this patch implements helper functions to handle msi-x and msi
uniformly.
They will be used later.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch introduces helper functions to test-and-{clear, set} mask in configuration
space. pci_{byte, word, long, quad}_test_and_{clear, set}_mask().
They will be used later.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Implement RW1C register framework.
With this patch, it would be easy to implement
W1C(Write 1 to Clear) register by just setting w1cmask.
Later RW1C register will be used by pcie.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Extract range functions from pci.h. These will be used by later patches
by non-PCI devices. Adjust current users.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>