Right now the arm gic emulation doesn't keep track of the source of an
SGI (which apparently Linux guests don't use, or they're fine with
assuming CPU 0 always).

Add the necessary matrix on the GICState structure and maintain the data
when setting and clearing the pending state of an IRQ and make the state
visible to the guest.

Note that we always choose to present the source as the lowest-numbered
CPU in case multiple cores have signalled the same SGI number to a core
on the system.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

TRIGGER can really mean mean anything (e.g. was it triggered, is it
level-triggered, is it edge-triggered, etc.).  Rename to EDGE_TRIGGER to
make the code comprehensible without looking up the data structure.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Message-id: 1387606179-22709-2-git-send-email-christoffer.dall@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

TRIGGER can really mean mean anything (e.g. was it triggered, is it
level-triggered, is it edge-triggered, etc.).  Rename to EDGE_TRIGGER to
make the code comprehensible without looking up the data structure.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Message-id: 1387606179-22709-2-git-send-email-christoffer.dall@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

device_add plugs devices into suitable bus.  For "real" buses, that
actually connects the device.  For sysbus, the connections need to be
made separately, and device_add can't do that.  The device would be
left unconnected, and could not possibly work.

Quite a few, but not all sysbus devices already set
cannot_instantiate_with_device_add_yet in their class init function.

Set it in their abstract base's class init function
sysbus_device_class_init(), and remove the now redundant assignments
from device class init functions.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

In an ideal world, machines can be built by wiring devices together
with configuration, not code.  Unfortunately, that's not the world we
live in right now.  We still have quite a few devices that need to be
wired up by code.  If you try to device_add such a device, it'll fail
in sometimes mysterious ways.  If you're lucky, you get an
unmysterious immediate crash.

To protect users from such badness, DeviceClass member no_user used to
make device models unavailable with -device / device_add, but that
regressed in commit 18b6dade.  The device model is still omitted from
help, but is available anyway.

Attempts to fix the regression have been rejected with the argument
that the purpose of no_user isn't clear, and it's prone to misuse.

This commit clarifies no_user's purpose.  Anthony suggested to rename
it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which
I shorten somewhat to keep checkpatch happy.  While there, make it
bool.

Every use of cannot_instantiate_with_device_add_yet gets a FIXME
comment asking for rationale.  The next few commits will clean them
all up, either by providing a rationale, or by getting rid of the use.

With that done, the regression fix is hopefully acceptable.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Rename NCPU to GIC_NCPU and move GICState away from gic_internal.h.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: NAndreas Färber <afaerber@suse.de>

Many headers are used only in a single directory.  These can be
kept in hw/.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Update the GIC save/restore to use vmstate rather than hand-rolled
save/load functions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NIgor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 1363975375-3166-4-git-send-email-peter.maydell@linaro.org

In preparation for switching to vmstate for migration support, fix
the sizes of various GIC state fields. In particular, we replace all
the bitfields (which VMState can't deal with) with straightforward
uint8_t values which we do bit operations on. (The bitfields made
more sense when NCPU was set differently in different situations,
but we now always model at the architectural limit of 8.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NIgor Mitsyanko <i.mitsyanko@gmail.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Message-id: 1363975375-3166-3-git-send-email-peter.maydell@linaro.org

Convert the ARM GIC classes to use init/realize rather than
SysBusDevice::init. (We have to do them all in one patch to
avoid unconverted subclasses calling a nonexistent SysBusDevice
init function in the base class and crashing.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAndreas Färber <afaerber@suse.de>

Add presave/postload hooks to the ARM GIC common base class.
These will be used by the KVM in-kernel GIC subclass to sync
state between kernel and userspace when migrating.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

Done with this script:

cd hw
for i in `find . -name '*.h' | sed 's/^..//'`; do
  echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,'
done | sed -i -f - `find . -type f`

This is so that paths remain valid as files are moved.

Instead, files in hw/dataplane are referenced with the relative path.
We know they are not going to move to include/, and they are the only
include files that are in subdirectories _and_ move.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Replace by SYS_BUS_DEVICE() QOM cast macro using a scripted conversion.
Avoids the old macro creeping into new code.

Resolve a Coding Style warning in openpic code.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Since 39bffca2 (qdev: register all
types natively through QEMU Object Model), TypeInfo as used in
the common, non-iterative pattern is no longer amended with information
and should therefore be const.

Fix the documented QOM examples:

 sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h

Since frequently the wrong examples are being copied by contributors of
new devices, fix all types in the tree:

 sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c
 sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c

This also avoids to piggy-back these changes onto real functional
changes or other refactorings.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The GIC architecture specification for v1 and v2 GICs (as found
on the Cortex-A9 and newer) states that the GICC_PMR reset value
is zero; this differs from the 0xf0 reset value used on 11MPCore.
The NVIC is different again in not having a CPU interface; since
we share the GIC code we must force the priority mask field to
allow through all interrupts.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NIgor Mitsyanko <i.mitsyanko@samsung.com>

Rename the gic_state struct to match QEMU's coding style conventions
for structure names, since the impending KVM-for-ARM patches will
create another subclass of it. This patch was created using:
  sed -i 's/gic_state/GICState/g' hw/arm_gic.c hw/arm_gic_common.c \
    hw/arm_gic_internal.h hw/armv7m_nvic.c
Acked-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Rearrange the GIC and NVIC so both are straightforward
subclasses of a common class, rather than having the NVIC
source file textually include arm_gic.c.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>