Skip to content

Q
qemu

openeuler / qemu

通知 10
Star 0
Fork 0
Q
qemu
提交 1e8cae4d 编写于 作者: P Peter Maydell
浏览文件
操作

hw/armv7m_nvic: Make the NVIC a freestanding class 

Rearrange the GIC and NVIC so both are straightforward
subclasses of a common class, rather than having the NVIC
source file textually include arm_gic.c.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
上级 2b518c56
隐藏空白更改
内联 并排
Showing with 371 addition and 240 deletion
hw/arm/Makefile.objs
浏览文件 @ 1e8cae4d
......@@ -6,7 +6,7 @@ obj-y += cadence_uart.o
obj-y += cadence_ttc.o
obj-y += cadence_gem.o
obj-y += xilinx_zynq.o zynq_slcr.o
obj-y += arm_gic.o
obj-y += arm_gic.o arm_gic_common.o
obj-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
obj-y += exynos4210_gic.o exynos4210_combiner.o exynos4210.o
obj-y += exynos4_boards.o exynos4210_uart.o exynos4210_pwm.o
......
hw/arm_gic.c
浏览文件 @ 1e8cae4d
......@@ -19,13 +19,7 @@
*/
#include "sysbus.h"
/* Maximum number of possible interrupts, determined by the GIC architecture */
#define GIC_MAXIRQ 1020
/* First 32 are private to each CPU (SGIs and PPIs). */
#define GIC_INTERNAL 32
/* Maximum number of possible CPU interfaces, determined by GIC architecture */
#define NCPU 8
#include "arm_gic_internal.h"
//#define DEBUG_GIC
......@@ -36,88 +30,12 @@ do { printf("arm_gic: " fmt , ## __VA_ARGS__); } while (0)
#define DPRINTF(fmt, ...) do {} while(0)
#endif
/* The NVIC has 16 internal vectors. However these are not exposed
through the normal GIC interface. */
#define GIC_BASE_IRQ ((s->revision == REV_NVIC) ? 32 : 0)
static const uint8_t gic_id[] = {
0x90, 0x13, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1
};
#define FROM_SYSBUSGIC(type, dev) \
DO_UPCAST(type, gic, FROM_SYSBUS(gic_state, dev))
typedef struct gic_irq_state
{
/* The enable bits are only banked for per-cpu interrupts. */
unsigned enabled:NCPU;
unsigned pending:NCPU;
unsigned active:NCPU;
unsigned level:NCPU;
unsigned model:1; /* 0 = N:N, 1 = 1:N */
unsigned trigger:1; /* nonzero = edge triggered. */
} gic_irq_state;
#define ALL_CPU_MASK ((unsigned)(((1 << NCPU) - 1)))
#define NUM_CPU(s) ((s)->num_cpu)
#define GIC_SET_ENABLED(irq, cm) s->irq_state[irq].enabled |= (cm)
#define GIC_CLEAR_ENABLED(irq, cm) s->irq_state[irq].enabled &= ~(cm)
#define GIC_TEST_ENABLED(irq, cm) ((s->irq_state[irq].enabled & (cm)) != 0)
#define GIC_SET_PENDING(irq, cm) s->irq_state[irq].pending |= (cm)
#define GIC_CLEAR_PENDING(irq, cm) s->irq_state[irq].pending &= ~(cm)
#define GIC_TEST_PENDING(irq, cm) ((s->irq_state[irq].pending & (cm)) != 0)
#define GIC_SET_ACTIVE(irq, cm) s->irq_state[irq].active |= (cm)
#define GIC_CLEAR_ACTIVE(irq, cm) s->irq_state[irq].active &= ~(cm)
#define GIC_TEST_ACTIVE(irq, cm) ((s->irq_state[irq].active & (cm)) != 0)
#define GIC_SET_MODEL(irq) s->irq_state[irq].model = 1
#define GIC_CLEAR_MODEL(irq) s->irq_state[irq].model = 0
#define GIC_TEST_MODEL(irq) s->irq_state[irq].model
#define GIC_SET_LEVEL(irq, cm) s->irq_state[irq].level = (cm)
#define GIC_CLEAR_LEVEL(irq, cm) s->irq_state[irq].level &= ~(cm)
#define GIC_TEST_LEVEL(irq, cm) ((s->irq_state[irq].level & (cm)) != 0)
#define GIC_SET_TRIGGER(irq) s->irq_state[irq].trigger = 1
#define GIC_CLEAR_TRIGGER(irq) s->irq_state[irq].trigger = 0
#define GIC_TEST_TRIGGER(irq) s->irq_state[irq].trigger
#define GIC_GET_PRIORITY(irq, cpu) (((irq) < GIC_INTERNAL) ? \
s->priority1[irq][cpu] : \
s->priority2[(irq) - GIC_INTERNAL])
#define GIC_TARGET(irq) s->irq_target[irq]
typedef struct gic_state
{
SysBusDevice busdev;
qemu_irq parent_irq[NCPU];
int enabled;
int cpu_enabled[NCPU];
gic_irq_state irq_state[GIC_MAXIRQ];
int irq_target[GIC_MAXIRQ];
int priority1[GIC_INTERNAL][NCPU];
int priority2[GIC_MAXIRQ - GIC_INTERNAL];
int last_active[GIC_MAXIRQ][NCPU];
int priority_mask[NCPU];
int running_irq[NCPU];
int running_priority[NCPU];
int current_pending[NCPU];
uint32_t num_cpu;
MemoryRegion iomem; /* Distributor */
/* This is just so we can have an opaque pointer which identifies
* both this GIC and which CPU interface we should be accessing.
*/
struct gic_state *backref[NCPU];
MemoryRegion cpuiomem[NCPU+1]; /* CPU interfaces */
uint32_t num_irq;
uint32_t revision;
} gic_state;
/* The special cases for the revision property: */
#define REV_11MPCORE 0
#define REV_NVIC 0xffffffff
static inline int gic_get_current_cpu(gic_state *s)
{
if (s->num_cpu > 1) {
......@@ -128,7 +46,7 @@ static inline int gic_get_current_cpu(gic_state *s)
/* TODO: Many places that call this routine could be optimized. */
/* Update interrupt status after enabled or pending bits have been changed. */
static void gic_update(gic_state *s)
void gic_update(gic_state *s)
{
int best_irq;
int best_prio;
......@@ -166,8 +84,7 @@ static void gic_update(gic_state *s)
}
}
#ifdef NVIC
static void gic_set_pending_private(gic_state *s, int cpu, int irq)
void gic_set_pending_private(gic_state *s, int cpu, int irq)
{
int cm = 1 << cpu;
......@@ -178,7 +95,6 @@ static void gic_set_pending_private(gic_state *s, int cpu, int irq)
GIC_SET_PENDING(irq, cm);
gic_update(s);
}
#endif
/* Process a change in an external IRQ input. */
static void gic_set_irq(void *opaque, int irq, int level)
......@@ -232,7 +148,7 @@ static void gic_set_running_irq(gic_state *s, int cpu, int irq)
gic_update(s);
}
static uint32_t gic_acknowledge_irq(gic_state *s, int cpu)
uint32_t gic_acknowledge_irq(gic_state *s, int cpu)
{
int new_irq;
int cm = 1 << cpu;
......@@ -251,7 +167,7 @@ static uint32_t gic_acknowledge_irq(gic_state *s, int cpu)
return new_irq;
}
static void gic_complete_irq(gic_state * s, int cpu, int irq)
void gic_complete_irq(gic_state *s, int cpu, int irq)
{
int update = 0;
int cm = 1 << cpu;
......@@ -623,7 +539,6 @@ static const MemoryRegionOps gic_dist_ops = {
.endianness = DEVICE_NATIVE_ENDIAN,
};
#ifndef NVIC
static uint32_t gic_cpu_read(gic_state *s, int cpu, int offset)
{
switch (offset) {
......@@ -715,124 +630,10 @@ static const MemoryRegionOps gic_cpu_ops = {
.write = gic_do_cpu_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
#endif
static void gic_reset(DeviceState *dev)
void gic_init_irqs_and_distributor(gic_state *s, int num_irq)
{
gic_state *s = FROM_SYSBUS(gic_state, sysbus_from_qdev(dev));
int i;
memset(s->irq_state, 0, GIC_MAXIRQ * sizeof(gic_irq_state));
for (i = 0 ; i < NUM_CPU(s); i++) {
s->priority_mask[i] = 0xf0;
s->current_pending[i] = 1023;
s->running_irq[i] = 1023;
s->running_priority[i] = 0x100;
s->cpu_enabled[i] = 0;
}
for (i = 0; i < 16; i++) {
GIC_SET_ENABLED(i, ALL_CPU_MASK);
GIC_SET_TRIGGER(i);
}
if (s->num_cpu == 1) {
/* For uniprocessor GICs all interrupts always target the sole CPU */
for (i = 0; i < GIC_MAXIRQ; i++) {
s->irq_target[i] = 1;
}
}
s->enabled = 0;
}
static void gic_save(QEMUFile *f, void *opaque)
{
gic_state *s = (gic_state *)opaque;
int i;
int j;
qemu_put_be32(f, s->enabled);
for (i = 0; i < NUM_CPU(s); i++) {
qemu_put_be32(f, s->cpu_enabled[i]);
for (j = 0; j < GIC_INTERNAL; j++)
qemu_put_be32(f, s->priority1[j][i]);
for (j = 0; j < s->num_irq; j++)
qemu_put_be32(f, s->last_active[j][i]);
qemu_put_be32(f, s->priority_mask[i]);
qemu_put_be32(f, s->running_irq[i]);
qemu_put_be32(f, s->running_priority[i]);
qemu_put_be32(f, s->current_pending[i]);
}
for (i = 0; i < s->num_irq - GIC_INTERNAL; i++) {
qemu_put_be32(f, s->priority2[i]);
}
for (i = 0; i < s->num_irq; i++) {
qemu_put_be32(f, s->irq_target[i]);
qemu_put_byte(f, s->irq_state[i].enabled);
qemu_put_byte(f, s->irq_state[i].pending);
qemu_put_byte(f, s->irq_state[i].active);
qemu_put_byte(f, s->irq_state[i].level);
qemu_put_byte(f, s->irq_state[i].model);
qemu_put_byte(f, s->irq_state[i].trigger);
}
}
static int gic_load(QEMUFile *f, void *opaque, int version_id)
{
gic_state *s = (gic_state *)opaque;
int i;
int j;
if (version_id != 3) {
return -EINVAL;
}
s->enabled = qemu_get_be32(f);
for (i = 0; i < NUM_CPU(s); i++) {
s->cpu_enabled[i] = qemu_get_be32(f);
for (j = 0; j < GIC_INTERNAL; j++)
s->priority1[j][i] = qemu_get_be32(f);
for (j = 0; j < s->num_irq; j++)
s->last_active[j][i] = qemu_get_be32(f);
s->priority_mask[i] = qemu_get_be32(f);
s->running_irq[i] = qemu_get_be32(f);
s->running_priority[i] = qemu_get_be32(f);
s->current_pending[i] = qemu_get_be32(f);
}
for (i = 0; i < s->num_irq - GIC_INTERNAL; i++) {
s->priority2[i] = qemu_get_be32(f);
}
for (i = 0; i < s->num_irq; i++) {
s->irq_target[i] = qemu_get_be32(f);
s->irq_state[i].enabled = qemu_get_byte(f);
s->irq_state[i].pending = qemu_get_byte(f);
s->irq_state[i].active = qemu_get_byte(f);
s->irq_state[i].level = qemu_get_byte(f);
s->irq_state[i].model = qemu_get_byte(f);
s->irq_state[i].trigger = qemu_get_byte(f);
}
return 0;
}
static void gic_init_irqs_and_distributor(gic_state *s, int num_irq)
{
int i;
if (s->num_cpu > NCPU) {
hw_error("requested %u CPUs exceeds GIC maximum %d\n",
s->num_cpu, NCPU);
}
s->num_irq = num_irq + GIC_BASE_IRQ;
if (s->num_irq > GIC_MAXIRQ) {
hw_error("requested %u interrupt lines exceeds GIC maximum %d\n",
num_irq, GIC_MAXIRQ);
}
/* ITLinesNumber is represented as (N / 32) - 1 (see
* gic_dist_readb) so this is an implementation imposed
* restriction, not an architectural one:
*/
if (s->num_irq < 32 || (s->num_irq % 32)) {
hw_error("%d interrupt lines unsupported: not divisible by 32\n",
num_irq);
}
i = s->num_irq - GIC_INTERNAL;
/* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
......@@ -850,17 +651,17 @@ static void gic_init_irqs_and_distributor(gic_state *s, int num_irq)
sysbus_init_irq(&s->busdev, &s->parent_irq[i]);
}
memory_region_init_io(&s->iomem, &gic_dist_ops, s, "gic_dist", 0x1000);
register_savevm(NULL, "arm_gic", -1, 3, gic_save, gic_load, s);
}
#ifndef NVIC
static int arm_gic_init(SysBusDevice *dev)
{
/* Device instance init function for the GIC sysbus device */
int i;
gic_state *s = FROM_SYSBUS(gic_state, dev);
ARMGICClass *agc = ARM_GIC_GET_CLASS(s);
agc->parent_init(dev);
gic_init_irqs_and_distributor(s, s->num_irq);
/* Memory regions for the CPU interfaces (NVIC doesn't have these):
......@@ -878,7 +679,6 @@ static int arm_gic_init(SysBusDevice *dev)
memory_region_init_io(&s->cpuiomem[i+1], &gic_cpu_ops, &s->backref[i],
"gic_cpu", 0x100);
}
/* Distributor */
sysbus_init_mmio(dev, &s->iomem);
/* cpu interfaces (one for "current cpu" plus one per cpu) */
......@@ -888,30 +688,19 @@ static int arm_gic_init(SysBusDevice *dev)
return 0;
}
static Property arm_gic_properties[] = {
DEFINE_PROP_UINT32("num-cpu", gic_state, num_cpu, 1),
DEFINE_PROP_UINT32("num-irq", gic_state, num_irq, 32),
/* Revision can be 1 or 2 for GIC architecture specification
* versions 1 or 2, or 0 to indicate the legacy 11MPCore GIC.
* (Internally, 0xffffffff also indicates "not a GIC but an NVIC".)
*/
DEFINE_PROP_UINT32("revision", gic_state, revision, 1),
DEFINE_PROP_END_OF_LIST(),
};
static void arm_gic_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
SysBusDeviceClass *sbc = SYS_BUS_DEVICE_CLASS(klass);
ARMGICClass *agc = ARM_GIC_CLASS(klass);
agc->parent_init = sbc->init;
sbc->init = arm_gic_init;
dc->props = arm_gic_properties;
dc->reset = gic_reset;
dc->no_user = 1;
}
static TypeInfo arm_gic_info = {
.name = "arm_gic",
.parent = TYPE_SYS_BUS_DEVICE,
.name = TYPE_ARM_GIC,
.parent = TYPE_ARM_GIC_COMMON,
.instance_size = sizeof(gic_state),
.class_init = arm_gic_class_init,
};
......@@ -922,5 +711,3 @@ static void arm_gic_register_types(void)
}
type_init(arm_gic_register_types)
#endif
hw/arm_gic_common.c 0 → 100644
浏览文件 @ 1e8cae4d
/*
* ARM GIC support - common bits of emulated and KVM kernel model
*
* Copyright (c) 2012 Linaro Limited
* Written by Peter Maydell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "arm_gic_internal.h"
static void gic_save(QEMUFile *f, void *opaque)
{
gic_state *s = (gic_state *)opaque;
int i;
int j;
qemu_put_be32(f, s->enabled);
for (i = 0; i < s->num_cpu; i++) {
qemu_put_be32(f, s->cpu_enabled[i]);
for (j = 0; j < GIC_INTERNAL; j++) {
qemu_put_be32(f, s->priority1[j][i]);
}
for (j = 0; j < s->num_irq; j++) {
qemu_put_be32(f, s->last_active[j][i]);
}
qemu_put_be32(f, s->priority_mask[i]);
qemu_put_be32(f, s->running_irq[i]);
qemu_put_be32(f, s->running_priority[i]);
qemu_put_be32(f, s->current_pending[i]);
}
for (i = 0; i < s->num_irq - GIC_INTERNAL; i++) {
qemu_put_be32(f, s->priority2[i]);
}
for (i = 0; i < s->num_irq; i++) {
qemu_put_be32(f, s->irq_target[i]);
qemu_put_byte(f, s->irq_state[i].enabled);
qemu_put_byte(f, s->irq_state[i].pending);
qemu_put_byte(f, s->irq_state[i].active);
qemu_put_byte(f, s->irq_state[i].level);
qemu_put_byte(f, s->irq_state[i].model);
qemu_put_byte(f, s->irq_state[i].trigger);
}
}
static int gic_load(QEMUFile *f, void *opaque, int version_id)
{
gic_state *s = (gic_state *)opaque;
int i;
int j;
if (version_id != 3) {
return -EINVAL;
}
s->enabled = qemu_get_be32(f);
for (i = 0; i < s->num_cpu; i++) {
s->cpu_enabled[i] = qemu_get_be32(f);
for (j = 0; j < GIC_INTERNAL; j++) {
s->priority1[j][i] = qemu_get_be32(f);
}
for (j = 0; j < s->num_irq; j++) {
s->last_active[j][i] = qemu_get_be32(f);
}
s->priority_mask[i] = qemu_get_be32(f);
s->running_irq[i] = qemu_get_be32(f);
s->running_priority[i] = qemu_get_be32(f);
s->current_pending[i] = qemu_get_be32(f);
}
for (i = 0; i < s->num_irq - GIC_INTERNAL; i++) {
s->priority2[i] = qemu_get_be32(f);
}
for (i = 0; i < s->num_irq; i++) {
s->irq_target[i] = qemu_get_be32(f);
s->irq_state[i].enabled = qemu_get_byte(f);
s->irq_state[i].pending = qemu_get_byte(f);
s->irq_state[i].active = qemu_get_byte(f);
s->irq_state[i].level = qemu_get_byte(f);
s->irq_state[i].model = qemu_get_byte(f);
s->irq_state[i].trigger = qemu_get_byte(f);
}
return 0;
}
static int arm_gic_common_init(SysBusDevice *dev)
{
gic_state *s = FROM_SYSBUS(gic_state, dev);
int num_irq = s->num_irq;
if (s->num_cpu > NCPU) {
hw_error("requested %u CPUs exceeds GIC maximum %d\n",
s->num_cpu, NCPU);
}
s->num_irq += GIC_BASE_IRQ;
if (s->num_irq > GIC_MAXIRQ) {
hw_error("requested %u interrupt lines exceeds GIC maximum %d\n",
num_irq, GIC_MAXIRQ);
}
/* ITLinesNumber is represented as (N / 32) - 1 (see
* gic_dist_readb) so this is an implementation imposed
* restriction, not an architectural one:
*/
if (s->num_irq < 32 || (s->num_irq % 32)) {
hw_error("%d interrupt lines unsupported: not divisible by 32\n",
num_irq);
}
register_savevm(NULL, "arm_gic", -1, 3, gic_save, gic_load, s);
return 0;
}
static void arm_gic_common_reset(DeviceState *dev)
{
gic_state *s = FROM_SYSBUS(gic_state, sysbus_from_qdev(dev));
int i;
memset(s->irq_state, 0, GIC_MAXIRQ * sizeof(gic_irq_state));
for (i = 0 ; i < s->num_cpu; i++) {
s->priority_mask[i] = 0xf0;
s->current_pending[i] = 1023;
s->running_irq[i] = 1023;
s->running_priority[i] = 0x100;
s->cpu_enabled[i] = 0;
}
for (i = 0; i < 16; i++) {
GIC_SET_ENABLED(i, ALL_CPU_MASK);
GIC_SET_TRIGGER(i);
}
if (s->num_cpu == 1) {
/* For uniprocessor GICs all interrupts always target the sole CPU */
for (i = 0; i < GIC_MAXIRQ; i++) {
s->irq_target[i] = 1;
}
}
s->enabled = 0;
}
static Property arm_gic_common_properties[] = {
DEFINE_PROP_UINT32("num-cpu", gic_state, num_cpu, 1),
DEFINE_PROP_UINT32("num-irq", gic_state, num_irq, 32),
/* Revision can be 1 or 2 for GIC architecture specification
* versions 1 or 2, or 0 to indicate the legacy 11MPCore GIC.
* (Internally, 0xffffffff also indicates "not a GIC but an NVIC".)
*/
DEFINE_PROP_UINT32("revision", gic_state, revision, 1),
DEFINE_PROP_END_OF_LIST(),
};
static void arm_gic_common_class_init(ObjectClass *klass, void *data)
{
SysBusDeviceClass *sc = SYS_BUS_DEVICE_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
dc->reset = arm_gic_common_reset;
dc->props = arm_gic_common_properties;
dc->no_user = 1;
sc->init = arm_gic_common_init;
}
static TypeInfo arm_gic_common_type = {
.name = TYPE_ARM_GIC_COMMON,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(gic_state),
.class_size = sizeof(ARMGICCommonClass),
.class_init = arm_gic_common_class_init,
.abstract = true,
};
static void register_types(void)
{
type_register_static(&arm_gic_common_type);
}
type_init(register_types)
hw/arm_gic_internal.h 0 → 100644
浏览文件 @ 1e8cae4d
/*
* ARM GIC support - internal interfaces
*
* Copyright (c) 2012 Linaro Limited
* Written by Peter Maydell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#ifndef QEMU_ARM_GIC_INTERNAL_H
#define QEMU_ARM_GIC_INTERNAL_H
#include "sysbus.h"
/* Maximum number of possible interrupts, determined by the GIC architecture */
#define GIC_MAXIRQ 1020
/* First 32 are private to each CPU (SGIs and PPIs). */
#define GIC_INTERNAL 32
/* Maximum number of possible CPU interfaces, determined by GIC architecture */
#define NCPU 8
#define ALL_CPU_MASK ((unsigned)(((1 << NCPU) - 1)))
/* The NVIC has 16 internal vectors. However these are not exposed
through the normal GIC interface. */
#define GIC_BASE_IRQ ((s->revision == REV_NVIC) ? 32 : 0)
#define GIC_SET_ENABLED(irq, cm) s->irq_state[irq].enabled |= (cm)
#define GIC_CLEAR_ENABLED(irq, cm) s->irq_state[irq].enabled &= ~(cm)
#define GIC_TEST_ENABLED(irq, cm) ((s->irq_state[irq].enabled & (cm)) != 0)
#define GIC_SET_PENDING(irq, cm) s->irq_state[irq].pending |= (cm)
#define GIC_CLEAR_PENDING(irq, cm) s->irq_state[irq].pending &= ~(cm)
#define GIC_TEST_PENDING(irq, cm) ((s->irq_state[irq].pending & (cm)) != 0)
#define GIC_SET_ACTIVE(irq, cm) s->irq_state[irq].active |= (cm)
#define GIC_CLEAR_ACTIVE(irq, cm) s->irq_state[irq].active &= ~(cm)
#define GIC_TEST_ACTIVE(irq, cm) ((s->irq_state[irq].active & (cm)) != 0)
#define GIC_SET_MODEL(irq) s->irq_state[irq].model = 1
#define GIC_CLEAR_MODEL(irq) s->irq_state[irq].model = 0
#define GIC_TEST_MODEL(irq) s->irq_state[irq].model
#define GIC_SET_LEVEL(irq, cm) s->irq_state[irq].level = (cm)
#define GIC_CLEAR_LEVEL(irq, cm) s->irq_state[irq].level &= ~(cm)
#define GIC_TEST_LEVEL(irq, cm) ((s->irq_state[irq].level & (cm)) != 0)
#define GIC_SET_TRIGGER(irq) s->irq_state[irq].trigger = 1
#define GIC_CLEAR_TRIGGER(irq) s->irq_state[irq].trigger = 0
#define GIC_TEST_TRIGGER(irq) s->irq_state[irq].trigger
#define GIC_GET_PRIORITY(irq, cpu) (((irq) < GIC_INTERNAL) ? \
s->priority1[irq][cpu] : \
s->priority2[(irq) - GIC_INTERNAL])
#define GIC_TARGET(irq) s->irq_target[irq]
typedef struct gic_irq_state {
/* The enable bits are only banked for per-cpu interrupts. */
unsigned enabled:NCPU;
unsigned pending:NCPU;
unsigned active:NCPU;
unsigned level:NCPU;
unsigned model:1; /* 0 = N:N, 1 = 1:N */
unsigned trigger:1; /* nonzero = edge triggered. */
} gic_irq_state;
typedef struct gic_state {
SysBusDevice busdev;
qemu_irq parent_irq[NCPU];
int enabled;
int cpu_enabled[NCPU];
gic_irq_state irq_state[GIC_MAXIRQ];
int irq_target[GIC_MAXIRQ];
int priority1[GIC_INTERNAL][NCPU];
int priority2[GIC_MAXIRQ - GIC_INTERNAL];
int last_active[GIC_MAXIRQ][NCPU];
int priority_mask[NCPU];
int running_irq[NCPU];
int running_priority[NCPU];
int current_pending[NCPU];
uint32_t num_cpu;
MemoryRegion iomem; /* Distributor */
/* This is just so we can have an opaque pointer which identifies
* both this GIC and which CPU interface we should be accessing.
*/
struct gic_state *backref[NCPU];
MemoryRegion cpuiomem[NCPU+1]; /* CPU interfaces */
uint32_t num_irq;
uint32_t revision;
} gic_state;
/* The special cases for the revision property: */
#define REV_11MPCORE 0
#define REV_NVIC 0xffffffff
void gic_set_pending_private(gic_state *s, int cpu, int irq);
uint32_t gic_acknowledge_irq(gic_state *s, int cpu);
void gic_complete_irq(gic_state *s, int cpu, int irq);
void gic_update(gic_state *s);
void gic_init_irqs_and_distributor(gic_state *s, int num_irq);
#define TYPE_ARM_GIC_COMMON "arm_gic_common"
#define ARM_GIC_COMMON(obj) \
OBJECT_CHECK(gic_state, (obj), TYPE_ARM_GIC_COMMON)
#define ARM_GIC_COMMON_CLASS(klass) \
OBJECT_CLASS_CHECK(ARMGICCommonClass, (klass), TYPE_ARM_GIC_COMMON)
#define ARM_GIC_COMMON_GET_CLASS(obj) \
OBJECT_GET_CLASS(ARMGICCommonClass, (obj), TYPE_ARM_GIC_COMMON)
typedef struct ARMGICCommonClass {
SysBusDeviceClass parent_class;
} ARMGICCommonClass;
#define TYPE_ARM_GIC "arm_gic"
#define ARM_GIC(obj) \
OBJECT_CHECK(gic_state, (obj), TYPE_ARM_GIC)
#define ARM_GIC_CLASS(klass) \
OBJECT_CLASS_CHECK(ARMGICClass, (klass), TYPE_ARM_GIC)
#define ARM_GIC_GET_CLASS(obj) \
OBJECT_GET_CLASS(ARMGICClass, (obj), TYPE_ARM_GIC)
typedef struct ARMGICClass {
ARMGICCommonClass parent_class;
int (*parent_init)(SysBusDevice *dev);
} ARMGICClass;
#endif /* !QEMU_ARM_GIC_INTERNAL_H */
hw/armv7m_nvic.c
浏览文件 @ 1e8cae4d
......@@ -14,13 +14,7 @@
#include "qemu-timer.h"
#include "arm-misc.h"
#include "exec-memory.h"
#define NVIC 1
static uint32_t nvic_readl(void *opaque, uint32_t offset);
static void nvic_writel(void *opaque, uint32_t offset, uint32_t value);
#include "arm_gic.c"
#include "arm_gic_internal.h"
typedef struct {
gic_state gic;
......@@ -36,6 +30,28 @@ typedef struct {
uint32_t num_irq;
} nvic_state;
#define TYPE_NVIC "armv7m_nvic"
/**
* NVICClass:
* @parent_reset: the parent class' reset handler.
*
* A model of the v7M NVIC and System Controller
*/
typedef struct NVICClass {
/*< private >*/
ARMGICClass parent_class;
/*< public >*/
int (*parent_init)(SysBusDevice *dev);
void (*parent_reset)(DeviceState *dev);
} NVICClass;
#define NVIC_CLASS(klass) \
OBJECT_CLASS_CHECK(NVICClass, (klass), TYPE_NVIC)
#define NVIC_GET_CLASS(obj) \
OBJECT_GET_CLASS(NVICClass, (obj), TYPE_NVIC)
#define NVIC(obj) \
OBJECT_CHECK(nvic_state, (obj), TYPE_NVIC)
static const uint8_t nvic_id[] = {
0x00, 0xb0, 0x1b, 0x00, 0x0d, 0xe0, 0x05, 0xb1
};
......@@ -429,8 +445,9 @@ static const VMStateDescription vmstate_nvic = {
static void armv7m_nvic_reset(DeviceState *dev)
{
nvic_state *s = FROM_SYSBUSGIC(nvic_state, sysbus_from_qdev(dev));
gic_reset(&s->gic.busdev.qdev);
nvic_state *s = NVIC(dev);
NVICClass *nc = NVIC_GET_CLASS(s);
nc->parent_reset(dev);
/* Common GIC reset resets to disabled; the NVIC doesn't have
* per-CPU interfaces so mark our non-existent CPU interface
* as enabled by default.
......@@ -443,12 +460,15 @@ static void armv7m_nvic_reset(DeviceState *dev)
static int armv7m_nvic_init(SysBusDevice *dev)
{
nvic_state *s= FROM_SYSBUSGIC(nvic_state, dev);
nvic_state *s = NVIC(dev);
NVICClass *nc = NVIC_GET_CLASS(s);
/* The NVIC always has only one CPU */
s->gic.num_cpu = 1;
/* Tell the common code we're an NVIC */
s->gic.revision = 0xffffffff;
s->gic.num_irq = s->num_irq;
nc->parent_init(dev);
gic_init_irqs_and_distributor(&s->gic, s->num_irq);
/* The NVIC and system controller register area looks like this:
* 0..0xff : system control registers, including systick
......@@ -489,9 +509,12 @@ static Property armv7m_nvic_properties[] = {
static void armv7m_nvic_class_init(ObjectClass *klass, void *data)
{
NVICClass *nc = NVIC_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
nc->parent_reset = dc->reset;
nc->parent_init = sdc->init;
sdc->init = armv7m_nvic_init;
dc->vmsd = &vmstate_nvic;
dc->reset = armv7m_nvic_reset;
......@@ -499,10 +522,11 @@ static void armv7m_nvic_class_init(ObjectClass *klass, void *data)
}
static TypeInfo armv7m_nvic_info = {
.name = "armv7m_nvic",
.parent = TYPE_SYS_BUS_DEVICE,
.name = TYPE_NVIC,
.parent = TYPE_ARM_GIC_COMMON,
.instance_size = sizeof(nvic_state),
.class_init = armv7m_nvic_class_init,
.class_size = sizeof(NVICClass),
};
static void armv7m_nvic_register_types(void)
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或