Commit 2b7ec66f fixed TCGMemOp masking following the MO_AMASK addition,
but two cases were forgotten in the TCG S390 backend.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Commit 2b7ec66f fixed TCGMemOp masking following the MO_AMASK addition,
but two cases were forgotten in the TCG MIPS backend.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

For 32-bit guest, we load a 32-bit address from the TLB, so there is no
need to compensate for the low or high part. This fixes 32-bit guests on
big-endian hosts.

Cc: qemu-stable@nongnu.org
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Pull request

These fixes make dataplane work again after the notify_me optimization was
added.  They also solve QEMUBH memory leaks and fix a bug in dataplane's
cleanup code.

# gpg: Signature made Wed Jul 29 14:50:26 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  AioContext: force event loop iteration using BH
  AioContext: avoid leaking BHs on cleanup
  virtio-blk-dataplane: delete bottom half before the AioContext is freed
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The notify_me optimization introduced in commit eabc9779
("AioContext: fix broken ctx->dispatching optimization") skips
event_notifier_set() calls when the event loop thread is not blocked in
ppoll(2).

This optimization causes a deadlock if two aio_context_acquire() calls
race.  notify_me = 0 during the race so the winning thread can enter
ppoll(2) unaware that the other thread is waiting its turn to acquire
the AioContext.

This patch forces ppoll(2) to return by scheduling a BH instead of
calling aio_notify().

The following deadlock with virtio-blk dataplane is fixed:

  qemu ... -object iothread,id=iothread0 \
           -drive if=none,id=drive0,file=test.img,... \
           -device virtio-blk-pci,iothread=iothread0,drive=drive0

This command-line results in a hang early on without this patch.

Thanks to Paolo Bonzini <pbonzini@redhat.com> for investigating this bug
with me.

Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1438101249-25166-4-git-send-email-pbonzini@redhat.com
Message-Id: <1438014819-18125-3-git-send-email-stefanha@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

BHs are freed during aio_bh_poll().  This leads to memory leaks if there
is no aio_bh_poll() between qemu_bh_delete() and aio_ctx_finalize().
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1438101249-25166-3-git-send-email-pbonzini@redhat.com
Message-Id: <1438014819-18125-2-git-send-email-stefanha@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Other uses of aio_bh_new are safe as long as all scheduled bottom
halves are run before an iothread is destroyed, which bdrv_drain will
ensure:

- archipelago_finish_aiocb: BH deletes itself

- inject_error: BH deletes itself

- blkverify_aio_bh: BH deletes itself

- abort_aio_request: BH deletes itself

- curl_aio_readv: BH deletes itself

- gluster_finish_aiocb: BH deletes itself

- bdrv_aio_rw_vector: BH deletes itself

- bdrv_co_maybe_schedule_bh: BH deletes itself

- iscsi_schedule_bh, iscsi_co_generic_cb: BH deletes itself

- laio_attach_aio_context: deleted in laio_detach_aio_context,
called through bdrv_detach_aio_context before deleting the iothread

- nfs_co_generic_cb: BH deletes itself

- null_aio_common: BH deletes itself

- qed_aio_complete: BH deletes itself

- rbd_finish_aiocb: BH deletes itself

- dma_blk_cb: BH deletes itself

- virtio_blk_dma_restart_cb: BH deletes itself

- qemu_bh_new: main loop AioContext is never destroyed

- test-aio.c: bh_delete_cb deletes itself, otherwise deleted in
the same function that calls aio_bh_new
Reported-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1438101249-25166-2-git-send-email-pbonzini@redhat.com
Message-Id: <1438086628-13000-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Pull request

These two .can_receive() are now reviewed.  The net subsystem queue for 2.4 is now empty.

# gpg: Signature made Tue Jul 28 13:26:03 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/net-pull-request:
  xen: Drop net_rx_ok
  hw/net: handle flow control in mcf_fec driver receiver
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

virtio fixes for 2.4

Mostly virtio 1 spec compliance fixes.
We are unlikely to make it perfectly compliant in
the first release, but it seems worth it to try.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon Jul 27 21:55:48 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  virtio: minor cleanup
  acpi: fix pvpanic device is not shown in ui
  virtio-blk: only clear VIRTIO_F_ANY_LAYOUT for legacy device
  virtio-blk: fail get_features when both scsi and 1.0 were set
  virtio: get_features() can fail
  virtio-pci: fix memory MR cleanup for modern
  virtio: set any_layout in virtio core
  virtio-9p: fix any_layout
  virtio-serial: fix ANY_LAYOUT
  virtio: hide legacy features from modern guests
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

MIPS patches 2015-07-28

Changes:
* net/dp8393x fixes
* Vectored Interrupts bug fix
* fix for a bug in machine.c which was provoking a warning on FreeBSD

# gpg: Signature made Tue Jul 28 10:47:19 2015 BST using RSA key ID 0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8DD3 2F98 5495 9D66 35D4  4FC0 5211 8E3C 0B29 DA6B

* remotes/lalrae/tags/mips-20150728:
  net/dp8393x: do not use memory_region_init_rom_device with NULL
  net/dp8393x: remove check of runt packets
  net/dp8393x: disable user creation
  target-mips: fix offset calculation for Interrupts
  target-mips: fix passing incompatible pointer type in machine.c
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* crypto fixes
* megasas SIGSEGV fix
* memory refcount change to fix virtio hot-unplug

# gpg: Signature made Tue Jul 28 08:29:07 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  memory: do not add a reference to the owner of aliased regions
  megasas: Add write function to handle write access to PCI BAR 3
  crypto: extend unit tests to cover decryption too
  crypto: fix built-in AES decrypt function
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

# gpg: Signature made Tue Jul 28 05:22:29 2015 BST using RSA key ID C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg:                 aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg:                 aka "Jeffrey Cody <codyprime@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98  D624 BDBE 7B27 C0DE 3057

* remotes/cody/tags/jtc-for-upstream-pull-request:
  block/ssh: Avoid segfault if inet_connect doesn't set errno.
  sheepdog: serialize requests to overwrapping area
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Let net_rx_packet() (which checks the same conditions) drops the packet
if the device is not ready. Drop net_xen_info.can_receive and update the
return value for the buffer full case.

We rely on the qemu_flush_queued_packets() in net_event() to wake up
the peer when the buffer becomes available again.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-id: 1438077176-378-1-git-send-email-famz@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

trivial patches for 2015-07-27

# gpg: Signature made Mon Jul 27 20:50:14 2015 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2015-07-27:
  gdbstub: Set current CPU on interruptions
  qapi: add missing @
  Fix Cortex-A9 global timer
  gitignore: Ignore shader generated files
  vmstate: remove unused declaration
  make: Clean build messages
  qemu-common.h: Document cutils.c string functions
  device_tree: Fix a typo
  hw/acpi/ich9: clean up stale comment about KVM not supporting SMM
  hw/acpi/ich9: clear smi_en on reset
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The network mcf_fec driver emulated receive side method is not dealing
with network queue flow control properly.

Modify the receive side to check if we have enough space in the
descriptors to store the current packet. If not we process none of it
and return 0. When the guest frees up some buffers through its descriptors
we signal the qemu net layer to send more packets.

[Fixed coding style: 4-space indent and curly braces on if statement.
--Stefan]
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Message-id: 1438045374-10358-1-git-send-email-gerg@uclinux.org
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Replace memory_region_init_rom_device() with memory_region_init_ram() and
memory_region_set_readonly().
This fixes a guest-triggerable QEMU crash when guest tries to write to PROM.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
[leon.alrae@imgtec.com: shorten subject length]
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Ethernet requires that messages are at least 64 bytes on the wire. This
limitation does not exist on emulation (no wire message), so remove the
check. Netcard is now able to receive small network packets.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Netcard needs an address space to write data to, which can't be specified
on command line.
This fixes a crash when user starts QEMU with "-device dp8393x"
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Block layer patches for 2.4.0-rc3

# gpg: Signature made Mon Jul 27 16:19:17 2015 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream:
  block: qemu-iotests - add check for multiplication overflow in vpc
  block: vpc - prevent overflow if max_table_entries >= 0x40000000
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Correct computation of vector offsets for EXCP_EXT_INTERRUPT.
For instance, if Cause.IV is 0 the vector offset should be 0x180.

Simplify the finding vector number logic for the Vectored Interrupts.
Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: NLeon Alrae <leon.alrae@imgtec.com>
[leon.alrae@imgtec.com: cosmetic changes]
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

Reported-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com>

On some (but not all) systems:

  $ qemu-img create -f qcow2 overlay -b ssh://xen/
  Segmentation fault

It turns out this happens when inet_connect returns -1 in the
following code, but errno == 0.

  s->sock = inet_connect(s->hostport, errp);
  if (s->sock < 0) {
      ret = -errno;
      goto err;
  }

In the test case above, no host called "xen" exists, so getaddrinfo fails.

On Fedora 22, getaddrinfo happens to set errno = ENOENT (although it
is *not* documented to do that), so it doesn't segfault.

On RHEL 7, errno is not set by the failing getaddrinfo, so ret =
-errno = 0, so the caller doesn't know there was an error and
continues with a half-initialized BDRVSSHState struct, and everything
goes south from there, eventually resulting in a segfault.

Fix this by setting ret to -EIO (same as block/nbd.c and
block/sheepdog.c).  The real error is saved in the Error** errp
struct, so it is printed correctly:

  $ ./qemu-img create -f qcow2 overlay -b ssh://xen/
  qemu-img: overlay: address resolution failed for xen:22: No address associated with hostname
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
Reported-by: Jun Li
BZ: https://bugzilla.redhat.com/show_bug.cgi?id=1147343Signed-off-by: NJeff Cody <jcody@redhat.com>

Current sheepdog driver only serializes create requests in oid
unit. This mechanism isn't enough for handling requests to
overwrapping area spanning multiple oids, so it can result bugs like
below:
https://bugs.launchpad.net/sheepdog-project/+bug/1456421

This patch adds a new serialization mechanism for the problem. The
difference from the old one is:
1. serialize entire aiocb if their targetting areas overwrap
2. serialize all requests (read, write, and discard), not only creates

This patch also removes the old mechanism because the new one can be
an alternative.

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Teruaki Ishizaki <ishizaki.teruaki@lab.ntt.co.jp>
Cc: Vasiliy Tolstov <v.tolstov@selfip.ru>
Signed-off-by: NHitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Tested-by: NVasiliy Tolstov <v.tolstov@selfip.ru>
Signed-off-by: NJeff Cody <jcody@redhat.com>

Very often the owner of the aliased region is the same as the owner of the alias
region itself.  When this happens, the reference count can never go back to 0 and
the owner is leaked.  This is for example breaking hot-unplug of virtio-pci
devices (the device cannot be plugged back again with the same id).

Another common use for alias is to transform the system I/O address space
into an MMIO regions; in this case the aliased region never dies, so there
is no problem.  Otherwise the owner is always the same for aliasing
and aliased region.

I checked all calls to memory_region_init_alias introduced after commit
dfde4e6e (memory: add ref/unref calls, 2013-05-06) and they do not need the
reference in order to keep the owner of the aliased region alive.
Reported-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch fixes a QEMU SEGFAULT when a write operation is performed on
the memory region of the PCI BAR 3 (base address space).
When a writeb(0xe0000000) is performed the .write function is invoked to
handle the write access, however, since the .write is not initialised,
the call to 0, causes QEMU to SEGFAULT.
Signed-off-by: NSalva Peiró <speirofr@gmail.com>
Acked-by: NHannes Reinecke <hare@suse.com>
Message-Id: <1437987112-24744-1-git-send-email-speirofr@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

There's no need for blk to set ANY_LAYOUT, it's
done by virtio core as necessary.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Commit 2332333c added a _STA method that hides the device. The fact
that the device is not shown in the gui make it harder to install its
Windows' device.

https://bugzilla.redhat.com/show_bug.cgi?id=1238141Signed-off-by: NGal Hammer <ghammer@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>

gdb expects that the thread ID for c and g-class operations is set to
the CPU we provide when reporting VM stop conditions. If the stub is
still tuned to a different CPU, the wrong information is delivered to
the gdb frontend.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The auto increment bit of the timer control register was wrongly
defined.

See Cortex-A9 MPcore Technical Reference Manual, Section 4.4.2.
Signed-off-by: NJohannes Schlatow <schlatow@ida.ing.tu-bs.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

As of d98bc0b6 there are two files that are automatically generated:
ui/shader/texture-blit-frag.h and /ui/shader/texture-blit-vert.h. None
of them is wanted to be tracked by git. Put them into the ignore file
then.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Since 38e0735e, register_device_unmigratable() has been removed
Signed-off-by: NMarc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

We want to have uniform build messages, so fix some messages
which did not follow the standard pattern.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Add documentation comments for various utility string functions
which we have implemented in util/cutils.c:
 pstrcpy()
 strpadcpy()
 pstrcat()
 strstart()
 stristart()
 qemu_strnlen()
 qemu_strsep()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Fix spelling of 'allocting' -> 'allocating'.
Signed-off-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Commit fba72476 ("ich9: add smm_enabled field and arguments") detached
SMM availability from kvm_enabled(). However, the comment in pm_reset()
was not updated; let's do it now.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Otherwise on reboot firmware might think (due to APMC_EN remaining set
from the previous boot) that SMI support is absent.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Fix buglets for 2.4

# gpg: Signature made Mon Jul 27 15:26:48 2015 BST using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-tcg-20150727:
  tcg: mark temps as mem_coherent = 0 for mov with a constant
  tcg: correctly mark dead inputs for mov with a constant
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

aio_notify can be optimized away, and in fact almost always will.  However,
qemu_notify_event is used in places where this is incorrect---most notably,
when handling SIGTERM.  When aio_notify is optimized away, it is possible that
QEMU enters a blocking ppoll immediately afterwards and stays there, without
reaching main_loop_should_exit().

Fix this by using a bottom half.  The bottom half can be optimized too, but
scheduling it is enough for the ppoll not to block.  The hang is thus avoided.
Reported-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-id: 1437738175-23624-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>