- 25 10月, 2017 30 次提交
-
-
由 Emilio G. Cota 提交于
This enables parallel TCG code generation. However, we do not take advantage of it yet since tb_lock is still held during tb_gen_code. In user-mode we use a single TCG context; see the documentation added to tcg_region_init for the rationale. Note that targets do not need any conversion: targets initialize a TCGContext (e.g. defining TCG globals), and after this initialization has finished, the context is cloned by the vCPU threads, each of them keeping a separate copy. TCG threads claim one entry in tcg_ctxs[] by atomically increasing n_tcg_ctxs. Do not be too annoyed by the subsequent atomic_read's of that variable and tcg_ctxs; they are there just to play nice with analysis tools such as thread sanitizer. Note that we do not allocate an array of contexts (we allocate an array of pointers instead) because when tcg_context_init is called, we do not know yet how many contexts we'll use since the bool behind qemu_tcg_mttcg_enabled() isn't set yet. Previous patches folded some TCG globals into TCGContext. The non-const globals remaining are only set at init time, i.e. before the TCG threads are spawned. Here is a list of these set-at-init-time globals under tcg/: Only written by tcg_context_init: - indirect_reg_alloc_order - tcg_op_defs Only written by tcg_target_init (called from tcg_context_init): - tcg_target_available_regs - tcg_target_call_clobber_regs - arm: arm_arch, use_idiv_instructions - i386: have_cmov, have_bmi1, have_bmi2, have_lzcnt, have_movbe, have_popcnt - mips: use_movnz_instructions, use_mips32_instructions, use_mips32r2_instructions, got_sigill (tcg_target_detect_isa) - ppc: have_isa_2_06, have_isa_3_00, tb_ret_addr - s390: tb_ret_addr, s390_facilities - sparc: qemu_ld_trampoline, qemu_st_trampoline (build_trampolines), use_vis3_instructions Only written by tcg_prologue_init: - 'struct jit_code_entry one_entry' - aarch64: tb_ret_addr - arm: tb_ret_addr - i386: tb_ret_addr, guest_base_flags - ia64: tb_ret_addr - mips: tb_ret_addr, bswap32_addr, bswap32u_addr, bswap64_addr Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Emilio G. Cota 提交于
This is groundwork for supporting multiple TCG contexts. The naive solution here is to split code_gen_buffer statically among the TCG threads; this however results in poor utilization if translation needs are different across TCG threads. What we do here is to add an extra layer of indirection, assigning regions that act just like pages do in virtual memory allocation. (BTW if you are wondering about the chosen naming, I did not want to use blocks or pages because those are already heavily used in QEMU). We use a global lock to serialize allocations as well as statistics reporting (we now export the size of the used code_gen_buffer with tcg_code_size()). Note that for the allocator we could just use a counter and atomic_inc; however, that would complicate the gathering of tcg_code_size()-like stats. So given that the region operations are not a fast path, a lock seems the most reasonable choice. The effectiveness of this approach is clear after seeing some numbers. I used the bootup+shutdown of debian-arm with '-tb-size 80' as a benchmark. Note that I'm evaluating this after enabling per-thread TCG (which is done by a subsequent commit). * -smp 1, 1 region (entire buffer): qemu: flush code_size=83885014 nb_tbs=154739 avg_tb_size=357 qemu: flush code_size=83884902 nb_tbs=153136 avg_tb_size=363 qemu: flush code_size=83885014 nb_tbs=152777 avg_tb_size=364 qemu: flush code_size=83884950 nb_tbs=150057 avg_tb_size=373 qemu: flush code_size=83884998 nb_tbs=150234 avg_tb_size=373 qemu: flush code_size=83885014 nb_tbs=154009 avg_tb_size=360 qemu: flush code_size=83885014 nb_tbs=151007 avg_tb_size=370 qemu: flush code_size=83885014 nb_tbs=151816 avg_tb_size=367 That is, 8 flushes. * -smp 8, 32 regions (80/32 MB per region) [i.e. this patch]: qemu: flush code_size=76328008 nb_tbs=141040 avg_tb_size=356 qemu: flush code_size=75366534 nb_tbs=138000 avg_tb_size=361 qemu: flush code_size=76864546 nb_tbs=140653 avg_tb_size=361 qemu: flush code_size=76309084 nb_tbs=135945 avg_tb_size=375 qemu: flush code_size=74581856 nb_tbs=132909 avg_tb_size=375 qemu: flush code_size=73927256 nb_tbs=135616 avg_tb_size=360 qemu: flush code_size=78629426 nb_tbs=142896 avg_tb_size=365 qemu: flush code_size=76667052 nb_tbs=138508 avg_tb_size=368 Again, 8 flushes. Note how buffer utilization is not 100%, but it is close. Smaller region sizes would yield higher utilization, but we want region allocation to be rare (it acquires a lock), so we do not want to go too small. * -smp 8, static partitioning of 8 regions (10 MB per region): qemu: flush code_size=21936504 nb_tbs=40570 avg_tb_size=354 qemu: flush code_size=11472174 nb_tbs=20633 avg_tb_size=370 qemu: flush code_size=11603976 nb_tbs=21059 avg_tb_size=365 qemu: flush code_size=23254872 nb_tbs=41243 avg_tb_size=377 qemu: flush code_size=28289496 nb_tbs=52057 avg_tb_size=358 qemu: flush code_size=43605160 nb_tbs=78896 avg_tb_size=367 qemu: flush code_size=45166552 nb_tbs=82158 avg_tb_size=364 qemu: flush code_size=63289640 nb_tbs=116494 avg_tb_size=358 qemu: flush code_size=51389960 nb_tbs=93937 avg_tb_size=362 qemu: flush code_size=59665928 nb_tbs=107063 avg_tb_size=372 qemu: flush code_size=38380824 nb_tbs=68597 avg_tb_size=374 qemu: flush code_size=44884568 nb_tbs=79901 avg_tb_size=376 qemu: flush code_size=50782632 nb_tbs=90681 avg_tb_size=374 qemu: flush code_size=39848888 nb_tbs=71433 avg_tb_size=372 qemu: flush code_size=64708840 nb_tbs=119052 avg_tb_size=359 qemu: flush code_size=49830008 nb_tbs=90992 avg_tb_size=362 qemu: flush code_size=68372408 nb_tbs=123442 avg_tb_size=368 qemu: flush code_size=33555560 nb_tbs=59514 avg_tb_size=378 qemu: flush code_size=44748344 nb_tbs=80974 avg_tb_size=367 qemu: flush code_size=37104248 nb_tbs=67609 avg_tb_size=364 That is, 20 flushes. Note how a static partitioning approach uses the code buffer poorly, leading to many unnecessary flushes. Reviewed-by: NRichard Henderson <richard.henderson@linaro.org> Signed-off-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Emilio G. Cota 提交于
Groundwork for supporting multiple TCG contexts. While at it, also allocate temps_used directly as a bitmap of the required size, instead of using a bitmap of TCG_MAX_TEMPS via TCGTempSet. Performance-wise we lose about 1.12% in a translation-heavy workload such as booting+shutting down debian-arm: Performance counter stats for 'taskset -c 0 arm-softmmu/qemu-system-arm \ -machine type=virt -nographic -smp 1 -m 4096 \ -netdev user,id=unet,hostfwd=tcp::2222-:22 \ -device virtio-net-device,netdev=unet \ -drive file=die-on-boot.qcow2,id=myblock,index=0,if=none \ -device virtio-blk-device,drive=myblock \ -kernel kernel.img -append console=ttyAMA0 root=/dev/vda1 \ -name arm,debug-threads=on -smp 1' (10 runs): exec time (s) Relative slowdown wrt original (%) --------------------------------------------------------------- original 20.213321616 0. tcg_malloc 20.441130078 1.1270214 TCGContext 20.477846517 1.3086662 g_malloc 20.780527895 2.8061013 The other two alternatives shown in the table are: - TCGContext: embed temps[TCG_MAX_TEMPS] and TCGTempSet used_temps in TCGContext. This is simple enough but it isn't faster than using tcg_malloc; moreover, it wastes memory. - g_malloc: allocate/deallocate both temps and used_temps every time tcg_optimize is executed. Suggested-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Emilio G. Cota 提交于
This is groundwork for supporting multiple TCG contexts. To avoid scalability issues when profiling info is enabled, this patch makes the profiling info counters distributed via the following changes: 1) Consolidate profile info into its own struct, TCGProfile, which TCGContext also includes. Note that tcg_table_op_count is brought into TCGProfile after dropping the tcg_ prefix. 2) Iterate over the TCG contexts in the system to obtain the total counts. This change also requires updating the accessors to TCGProfile fields to use atomic_read/set whenever there may be conflicting accesses (as defined in C11) to them. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Emilio G. Cota 提交于
Groundwork for supporting multiple TCG contexts. Note that having n_tcg_ctxs is unnecessary. However, it is convenient to have it, since it will simplify iterating over the array: we'll have just a for loop instead of having to iterate over a NULL-terminated array (which would require n+1 elems) or having to check with ifdef's for usermode/softmmu. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Emilio G. Cota 提交于
Groundwork for supporting multiple TCG contexts. Reviewed-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Signed-off-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Emilio G. Cota 提交于
Groundwork for supporting multiple TCG contexts. The core of this patch is this change to tcg/tcg.h: > -extern TCGContext tcg_ctx; > +extern TCGContext tcg_init_ctx; > +extern TCGContext *tcg_ctx; Note that for now we set *tcg_ctx to whatever TCGContext is passed to tcg_context_init -- in this case &tcg_init_ctx. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Emilio G. Cota 提交于
Groundwork for supporting multiple TCG contexts. Reviewed-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Signed-off-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Emilio G. Cota 提交于
Thereby decoupling the resulting translated code from the current state of the system. The tb->cflags field is not passed to tcg generation functions. So we add a field to TCGContext, storing there a copy of tb->cflags. Most architectures have <= 32 registers, which results in a 4-byte hole in TCGContext. Use this hole for the new field. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Emilio G. Cota 提交于
This will enable us to decouple code translation from the value of parallel_cpus at any given time. It will also help us minimize TB flushes when generating code via EXCP_ATOMIC. Note that the declaration of parallel_cpus is brought to exec-all.h to be able to define there the "curr_cflags" inline. Signed-off-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Richard Henderson 提交于
Using the offset of a temporary, relative to TCGContext, rather than its index means that we don't use 0. That leaves offset 0 free for a NULL representation without having to leave index 0 unused. Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Richard Henderson 提交于
When we used structures for TCGv_*, we needed a macro in order to perform a comparison. Now that we use pointers, this is just clutter. Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Richard Henderson 提交于
The GET and MAKE functions weren't really specific enough. We now have a full complement of functions that convert exactly between temporaries, arguments, tcgv pointers, and indices. The target/sparc change is also a bug fix, which would have affected a host that defines TCG_TARGET_HAS_extr[lh]_i64_i32, i.e. MIPS64. Reviewed-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Richard Henderson 提交于
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Richard Henderson 提交于
Transform TCGv_* to an "argument" or a temporary. For now, an argument is simply the temporary index. Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Richard Henderson 提交于
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Richard Henderson 提交于
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Richard Henderson 提交于
While we're touching many of the lines anyway, adjust the naming of the functions to better distinguish when "TCGArg" vs "TCGTemp" should be used. Reviewed-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Reviewed-by: NEmilio G. Cota <cota@braap.org> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Copy s->nb_globals or s->nb_temps to a local variable for the purposes of iteration. This should allow the compiler to use low-overhead looping constructs on some hosts. Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NEmilio G. Cota <cota@braap.org> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
This avoids having to allocate external memory for each temporary. Reviewed-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
At the same time, drop the TCGContext argument and use tcg_ctx instead. Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
This avoids needing to test the index of a temp against nb_globals. Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Reviewed-by: NEmilio G. Cota <cota@braap.org> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Reviewed-by: NEmilio G. Cota <cota@braap.org> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Reviewed-by: NEmilio G. Cota <cota@braap.org> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Reviewed-by: NEmilio G. Cota <cota@braap.org> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Richard Henderson 提交于
Rather than have a separate buffer of 10*max_ops entries, give each opcode 10 entries. The result is actually a bit smaller and should have slightly more cache locality. Reviewed-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
- 11 10月, 2017 2 次提交
-
-
由 Jiang Biao 提交于
Delete commented out extern keyword on link_error(). Signed-off-by: NJiang Biao <jiang.biao2@zte.com.cn> Message-Id: <1506762042-32145-1-git-send-email-jiang.biao2@zte.com.cn> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Emilio G. Cota 提交于
Will come in handy very soon. Reviewed-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Signed-off-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
- 10 10月, 2017 6 次提交
-
-
由 Emilio G. Cota 提交于
Groundwork for supporting multiple TCG contexts. The hash table becomes read-only after it is filled in, so we can save space by keeping just a global pointer to it. Reviewed-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Signed-off-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Emilio G. Cota 提交于
Groundwork for supporting multiple TCG contexts. Compile-tested for all targets on an x86_64 host. Suggested-by: NRichard Henderson <rth@twiddle.net> Acked-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Emilio G. Cota 提交于
In preparation for adding tc.size to be able to keep track of TB's using the binary search tree implementation from glib. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Emilio G. Cota 提交于
It is unlikely that we will ever want to call this helper passing an argument other than the current PC. So just remove the argument, and use the pc we already get from cpu_get_tb_cpu_state. This change paves the way to having a common "tb_lookup" function. Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Emilio G. Cota 提交于
Reviewed-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Emilio G. Cota 提交于
Reviewed-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NAlex Bennée <alex.bennee@linaro.org> Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: NEmilio G. Cota <cota@braap.org> Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
- 17 9月, 2017 2 次提交
-
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-
由 Richard Henderson 提交于
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
-