Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

After attaching the source, we have to remove the reference we hold
to it, because we do not hold anymore a pointer to the source.

If we do not do this, removing the source will not finalize it and
will not drop the "real" I/O watch source.

This showed up when backporting the new flow control patches to older
versions of QEMU that still used select.  The whole select then failed
with EBADF (poll instead will reporting POLLNVAL on a single pollfd)
and QEMU froze.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1365600207-21685-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The qdev field is no longer needed, just drop it.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-8-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

As the virtio-serial-pci and virtio-serial-s390 are switched to the new
API, we can use QOM casts.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This remove old init and exit function as they are no longer needed.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Here the virtio-serial-ccw is modified for the new API. The device
virtio-serial-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-serial during the init. The properties are not modified.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Here the virtio-serial-s390 is modified for the new API. The device
virtio-serial-s390 extends virtio-s390-device as before. It creates and
connects a virtio-serial during the init. The properties are not
modified.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Here the virtio-serial-pci is modified for the new API. The device
virtio-serial-pci extends virtio-pci. It creates and connects a
virtio-serial during the init. The properties are not changed.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Create virtio-serial which extends virtio-device, so it can be connected
on virtio-bus.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This fix the broken aliases, by renaming the devices.

So: * virtio-blk => virtio-blk-device.
    * virtio-balloon => virtio-balloon-device.
    * virtio-scsi => virtio-scsi-device.

All virtio-*-pci, virtio-*-s390, virtio-*-ccw didn't change.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1365501888-14602-1-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commit c45e5b5b made a switch use the efi-enabled nic roms by default.
This patch updates the Makefile to install the roms so they can actually be used.
Signed-off-by: NSander Eikelenboom <linux@eikelenboom.it>
Message-id: 1365455293-7084-1-git-send-email-linux@eikelenboom.it
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Headers shouldn't assume another header is included,
pull in everything necessary.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Message-id: 20130415081250.GA7374@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The operands for MAQ_SA_W.PHL/MAQ_SA_W.PHR must in specified format.
Otherwise, the results are unpredictable. Once the operands were corrected
in the tests (part of this change), a bug in mipsdsp_mul_q15_q15 became
visible.

This change corrects the tests for MAQ_SA_W.PHL/MAQ_SA_W.PHR and fixes
sign-related issue in mipsdsp_mul_q15_q15. It also removes unnecessary
comment.
Signed-off-by: NPetar Jovanovic <petar.jovanovic@imgtec.com>

In handling float64_muladd, if we end up doing a subtraction of the
product and c, and the 128 bit result of this subtraction happens to
have its most significant bit in bit 63, we weren't handling this
correctly when attempting to normalize to put the most significant
bit into bit 126.  We would end up doing a right shift by a negative
number (undefined behaviour in C) so at best we would return an
incorrect result to the guest.  MSB in bit 63 has to be handled as a
special case separately from MSB in 0..62 and MSB in 63..126.  (MSB
in 127 is not possible.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

* stefanha/block:
  rbd: add an asynchronous flush
  iotests: Add 'check -ssh' option to test Secure Shell block device.
  block: ssh: Use libssh2_sftp_fsync (if supported by libssh2) to flush to disk.
  block: Add support for Secure Shell (ssh) block device.
  ide: refuse WIN_READ_NATIVE_MAX on empty device
  qemu-iotests: filter QEMU_PROG in 051.out
  qemu-iotests: Add test for -drive options
  qemu-iotests: A few more bdrv_pread/pwrite tests
  block: Introduce bdrv_pwritev() for qcow2_save_vmstate
  savevm: Implement block_writev_buffer()
  block: Introduce bdrv_writev_vmstate

Conflicts:
	savevm.c

aliguori: add f->pos parameter to writev_buffer().
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Michal Novotny (2) and Eric Blake (1)
# Via Luiz Capitulino
* luiz/queue/qmp:
  qapi: use valid JSON in schema
  Revert "New QMP command query-cpu-max and HMP command cpu_max"
  New cpu-max field in query-machines QMP command output

Message-id: 1365775103-18737-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Paolo Bonzini
# Via Juan Quintela
* quintela/migration.next:
  migration: simplify writev vs. non-writev logic
  migration: drop is_write complications
  migration: use a single I/O operation when writev_buffer is not defined
  migration: set f->is_write and flush in add_to_iovec

Message-id: 1365512961-15623-1-git-send-email-quintela@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The existing bdrv_co_flush_to_disk implementation uses rbd_flush(),
which is sychronous and causes the main qemu thread to block until it
is complete. This results in unresponsiveness and extra latency for
the guest.

Fix this by using an asynchronous version of flush.  This was added to
librbd with a special #define to indicate its presence, since it will
be backported to stable versions. Thus, there is no need to check the
version of librbd.

Implement this as bdrv_aio_flush, since it matches other aio functions
in the rbd block driver, and leave out bdrv_co_flush_to_disk when the
asynchronous version is available.
Reported-by: NOliver Francke <oliver@filoo.de>
Signed-off-by: NJosh Durgin <josh.durgin@inktank.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Note in order to run these tests on ssh, you must be running a local
ssh daemon, and that daemon must accept loopback connections, and
ssh-agent has to be set up to allow logins on the local daemon.  In
other words, the following command should just work without demanding
any passphrase:

 ssh localhost
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

libssh2_sftp_fsync is an extension to libssh2 to support fsync(2) over
sftp, which is itself an extension of OpenSSH.

If both libssh2 and the ssh daemon support it, this will allow
bdrv_flush_to_disk to commit changes through to disk on the remote
server.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

  qemu-system-x86_64 -drive file=ssh://hostname/some/image

QEMU will ssh into 'hostname' and open '/some/image' which is made
available as a standard block device.

You can specify a username (ssh://user@host/...) and/or a port number
(ssh://host:port/...).  You can also use an alternate syntax using
properties (file.user, file.host, file.port, file.path).

Current limitations:

- Authentication must be done without passwords or passphrases, using
  ssh-agent.  Other authentication methods are not supported.

- Uses a single connection, instead of concurrent AIO with multiple
  SSH connections.

This is implemented using libssh2 on the client side.  The server just
requires a regular ssh daemon with sftp-server support.  Most ssh
daemons on Unix/Linux systems will work out of the box.
Signed-off-by: NRichard W.M. Jones <rjones@redhat.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

What is the highest addressable sector on an empty CD-ROM?  Nothing is
addressable so produce an error.

This patch prevents a divide-by-zero in ide_set_sector() since
s->sectors and s->heads would be 0.  Not to mention that a sector=-1
argument would be nonsense.

Note that WIN_READ_NATIVE_MAX can be triggered using hdparm -N 1024
/dev/cdrom.  The LBA bit will be set to 1 though, so the only easy way
to go down the ide_set_sector() CHS code path which divides by zero is
to comment out the s->select & 0x40 case for testing.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Filter the name of the QEMU executable so the output can be diffed no
matter what QEMU_PROG is (e.g. qemu-system-x86_64).
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Directly pass the QEMUIOVector on instead of linearising it.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Instead of breaking up RAM state into many small chunks, pass the iovec
to the block layer for better performance.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Known bugs in to_json():

* A start byte for a three-byte sequence followed by less than two
  continuation bytes is split into one-byte sequences.

* Start bytes for sequences longer than three bytes get misinterpreted
  as start bytes for three-byte sequences.  Continuation bytes beyond
  byte three become one-byte sequences.

  This means all characters outside the BMP are decoded incorrectly.

* One-byte sequences with the MSB are put into the JSON string
  verbatim when char is unsigned, producing invalid UTF-8.  When char
  is signed, they're replaced by "\\uFFFF" instead.

  This includes \xFE, \xFF, and stray continuation bytes.

* Overlong sequences are happily accepted, unless screwed up by the
  bugs above.

* Likewise, sequences encoding surrogate code points or noncharacters.

* Unlike other control characters, ASCII DEL is not escaped.  Except
  in overlong encodings.

My rewrite fixes them as follows:

* Malformed UTF-8 sequences are replaced.

  Except the overlong encoding \xC0\x80 of U+0000 is still accepted.
  Permits embedding NUL characters in C strings.  This trick is known
  as "Modified UTF-8".

* Sequences encoding code points beyond Unicode range are replaced.

* Sequences encoding code points beyond the BMP produce a surrogate
  pair.

* Sequences encoding surrogate code points are replaced.

* Sequences encoding noncharacters are replaced.

* ASCII DEL is now always escaped.

The replacement character is U+FFFD.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Test cases cover the two noncharacters in the BMP.  Add tests for the
other 64 noncharacters.

Three existing test cases involve noncharacters U+FFFF and U+10FFFF.
Instead of deleting them as now duplicates, adjust them to use U+FFFC
and U+10FFFFD.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'mingw' of git://qemu.weilnetz.de/qemu:
  qemu-timer: move timeBeginPeriod/timeEndPeriod to os-win32
  Release SMP restriction on Windows
  Ensure good ordering of memory instruction in cpu_exec
  Check effective suspension of TCG thread

Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>