- 24 8月, 2011 1 次提交
-
-
由 MORITA Kazutaka 提交于
This makes the sheepdog block driver support bdrv_co_readv/writev instead of bdrv_aio_readv/writev. With this patch, Sheepdog network I/O becomes fully asynchronous. The block driver yields back when send/recv returns EAGAIN, and is resumed when the sheepdog network connection is ready for the operation. Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 23 8月, 2011 17 次提交
-
-
由 Frediano Ziglio 提交于
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Frediano Ziglio 提交于
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Frediano Ziglio 提交于
prepare to remove read/write callbacks Signed-off-by: NFrediano Ziglio <freddy77@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Frediano Ziglio 提交于
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Frediano Ziglio 提交于
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Frediano Ziglio 提交于
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Frediano Ziglio 提交于
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Frediano Ziglio 提交于
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Frediano Ziglio 提交于
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Frediano Ziglio 提交于
Embed qcow_aio_read_cb into qcow_co_readv and qcow_aio_write_cb into qcow_co_writev Signed-off-by: NFrediano Ziglio <freddy77@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Frediano Ziglio 提交于
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Frediano Ziglio 提交于
remove unused field from this structure and put some of them in qcow_aio_read_cb and qcow_aio_write_cb Signed-off-by: NFrediano Ziglio <freddy77@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Frediano Ziglio 提交于
instead of calling qemi_aio_get use stack Signed-off-by: NFrediano Ziglio <freddy77@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Nicholas Thomas 提交于
Current behaviour if a read fails is for the acb to not get finished. This causes an infinite loop in bdrv_read_em (block.c). The read failure never gets reported to the guest and if the error condition clears, the process never recovers. With this patch, when curl reports a failure we finish the acb as a failure. This results in the guest receiving an I/O error (rather than the read hanging indefinitely) and if the error condition subsequently clears, retries work as expected. The simplest test is to put an ISO on a web server you have control over and open it with qemu-io. Then move the ISO out of the way and attempt to read some data - you should see behaviour matching the above. Signed-off-by: NNick Thomas <nick@bytemark.co.uk> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Scott Wood 提交于
commit 52b8eb60 added a mutex, but never initialized it. This caused a segfault. Reported-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Devin Nakamura 提交于
Documentation states the num is measured in clusters, but its actually measured in sectors Signed-off-by: NDevin Nakamura <devin122@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Philipp Hahn 提交于
By introducing BlockDriverState compiling qcow2 with DEBUG_ALLOC and DEBUG_EXT defined got broken. Define a BdrvCheckResult structure locally which is now needed as the second argument. Also fix qcow2_read_extensions() needing BDRVQcowState. Signed-off-by: NPhilipp Hahn <hahn@univention.de> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 22 8月, 2011 1 次提交
-
-
由 Stefan Weil 提交于
SetFilePointer returns INVALID_SET_FILE_POINTER when it fails. In addition, GetLastError must be checked. The first call of SetFilePointer did not use INVALID_SET_FILE_POINTER, the second call used wrong error handling. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 21 8月, 2011 1 次提交
-
-
由 Anthony Liguori 提交于
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 05 8月, 2011 1 次提交
-
-
由 Kevin Wolf 提交于
When loading an internal snapshot whose L1 table is smaller than the current L1 table, the size of the current L1 would be shrunk to the snapshot's L1 size in memory, but not on disk. This lead to incorrect refcount updates and eventuelly to image corruption. Instead of writing the new L1 size to disk, this simply retains the bigger L1 size that is currently in use and makes sure that the unused part is zeroed. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Tested-by: NPhilipp Hahn <hahn@univention.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 02 8月, 2011 3 次提交
-
-
由 Kevin Wolf 提交于
The purpose of AsyncContexts was to protect qcow and qcow2 against reentrancy during an emulated bdrv_read/write (which includes a qemu_aio_wait() call and can run AIO callbacks of different requests if it weren't for AsyncContexts). Now both qcow and qcow2 are protected by CoMutexes and AsyncContexts can be removed. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
The old qcow format is another user of the AsyncContext infrastructure. Converting it to coroutines (and therefore CoMutexes) allows to remove AsyncContexts. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 01 8月, 2011 6 次提交
-
-
由 Frediano Ziglio 提交于
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Frediano Ziglio 提交于
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Serge E. Hallyn 提交于
VHD files technically can be up to 2Tb, but virtual pc is limited to 127G. Currently qemu-img refused to create vpc files > 127G, but it is failing to return error when converting from a non-vpc VHD file which is >127G. It returns success, but creates a truncated converted image. Also, qemu-img info claims the vpc file is 127G (and clean). This patch detects a too-large vpc file and returns -EFBIG. Without this patch, ============================================================= root@ip-10-38-123-242:~/qemu-fixed# qemu-img info /mnt/140g-dynamic.vhd image: /mnt/140g-dynamic.vhd file format: vpc virtual size: 127G (136899993600 bytes) disk size: 284K root@ip-10-38-123-242:~/qemu-fixed# qemu-img convert -f vpc -O raw /mnt/140g-dynamic.vhd /mnt/y root@ip-10-38-123-242:~/qemu-fixed# echo $? 0 root@ip-10-38-123-242:~/qemu-fixed# qemu-img info /mnt/y image: /mnt/y file format: raw virtual size: 127G (136899993600 bytes) disk size: 0 ============================================================= (The 140G image was truncated with no warning or error.) With the patch, I get: ============================================================= root@ip-10-38-123-242:~/qemu-fixed# ./qemu-img info /mnt/140g-dynamic.vhd qemu-img: Could not open '/mnt/140g-dynamic.vhd': File too large root@ip-10-38-123-242:~/qemu-fixed# ./qemu-img convert -f vpc -O raw /mnt/140g-dynamic.vhd /mnt/y qemu-img: Could not open '/mnt/140g-dynamic.vhd': File too large qemu-img: Could not open '/mnt/140g-dynamic.vhd' ============================================================= See https://bugs.launchpad.net/qemu/+bug/814222 for details. Signed-off-by: NSerge Hallyn <serge.hallyn@canonical.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Callees always return 0, except for FreeBSD's cdrom_eject(), which returns -ENOTSUP when the device is in a terminally wedged state. The only caller is bdrv_eject(), and it maps -ENOTSUP to 0 since commit 4be9762a. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
The only caller is bdrv_set_locked(), and it ignores the value. Callees always return 0, except for FreeBSD's cdrom_set_locked(), which returns -ENOTSUP when the device is in a terminally wedged state. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
It's been disabled since the start (commit 19cb3738, Aug 2006), and has been untouched except for spelling fixes and such. I don't feel like dragging it along any further. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 25 7月, 2011 1 次提交
-
-
由 Blue Swirl 提交于
Avoid warnings like these by wrapping recv(): CC slirp/ip_icmp.o /src/qemu/slirp/ip_icmp.c: In function 'icmp_receive': /src/qemu/slirp/ip_icmp.c:418:5: error: passing argument 2 of 'recv' from incompatible pointer type [-Werror] /usr/local/lib/gcc/i686-mingw32msvc/4.6.0/../../../../i686-mingw32msvc/include/winsock2.h:547:32: note: expected 'char *' but argument is of type 'struct icmp *' Remove also casts used to avoid warnings. Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 19 7月, 2011 9 次提交
-
-
由 Kevin Wolf 提交于
In snapshotting there is no guest involved, so we can safely use a writeback mode and do the flushes in the right place (i.e. at the very end). This improves the time that creating/restoring an internal snapshot takes with an image in writethrough mode. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
qemu-img.c wants to count allocated file size of image. Previously it counts a single bs->file by 'stat' or Window API. As VMDK introduces multiple file support, the operation becomes format specific with platform specific meanwhile. The functions are moved to block/raw-{posix,win32}.c and qemu-img.c calls bdrv_get_allocated_file_size to count the bs. And also added VMDK code to count his own extents. Signed-off-by: NFam Zheng <famcool@gmail.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Conform coding style in vmdk.c to pass scripts/checkpatch.pl checks. Signed-off-by: NFam Zheng <famcool@gmail.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Add create option 'format', with enums: monolithicSparse monolithicFlat twoGbMaxExtentSparse twoGbMaxExtentFlat Each creates a subformat image file. The default is monolithicSparse. Signed-off-by: NFam Zheng <famcool@gmail.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Parse vmdk decriptor file and open mono flat image. Read/write the flat extent. Signed-off-by: NFam Zheng <famcool@gmail.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
The return type of get_cluster_offset was an offset that use 0 to denote 'not allocated', this will be no longer true for flat extents, as we see flat extent file as a single huge cluster whose offset is 0 and length is the whole file length. So now we use int return value, 0 means success and otherwise offset invalid. Signed-off-by: NFam Zheng <famcool@gmail.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Cid_update is the flag for updating CID on first write after opening the image. This should be per image open rather than per program life cycle, so change it from static var of vmdk_write to a field in BDRVVmdkState. Signed-off-by: NFam Zheng <famcool@gmail.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
Flush all the file that referenced by the image. Signed-off-by: NFam Zheng <famcool@gmail.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Fam Zheng 提交于
There are several occurrence of magic number 0x200 as the descriptor offset within mono sparse image file. This is not the case for images with separate descriptor file. So a field is added to BDRVVmdkState to hold the correct value. Signed-off-by: NFam Zheng <famcool@gmail.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-