This makes the sheepdog block driver support bdrv_co_readv/writev
instead of bdrv_aio_readv/writev.

With this patch, Sheepdog network I/O becomes fully asynchronous.  The
block driver yields back when send/recv returns EAGAIN, and is resumed
when the sheepdog network connection is ready for the operation.
Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

prepare to remove read/write callbacks
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Embed qcow_aio_read_cb into qcow_co_readv and qcow_aio_write_cb into qcow_co_writev
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

remove unused field from this structure and put some of them in qcow_aio_read_cb and qcow_aio_write_cb
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

instead of calling qemi_aio_get use stack
Signed-off-by: NFrediano Ziglio <freddy77@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

In certain circumstances, posix-aio-compat can incur a lot of latency:
 - threads are created by vcpu threads, so if vcpu affinity is set,
   aio threads inherit vcpu affinity.  This can cause many aio threads
   to compete for one cpu.
 - we can create up to max_threads (64) aio threads in one go; since a
   pthread_create can take around 30μs, we have up to 2ms of cpu time
   under a global lock.

Fix by:
 - moving thread creation to the main thread, so we inherit the main
   thread's affinity instead of the vcpu thread's affinity.
 - if a thread is currently being created, and we need to create yet
   another thread, let thread being born create the new thread, reducing
   the amount of time we spend under the main thread.
 - drop the local lock while creating a thread (we may still hold the
   global mutex, though)

Note this doesn't eliminate latency completely; scheduler artifacts or
lack of host cpu resources can still cause it.  We may want pre-allocated
threads when this cannot be tolerated.

Thanks to Uli Obergfell of Red Hat for his excellent analysis and suggestions.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Current behaviour if a read fails is for the acb to not get finished.
This causes an infinite loop in bdrv_read_em (block.c). The read failure
never gets reported to the  guest and if the error condition clears, the
process never recovers.

With this patch, when curl reports a failure we finish the acb as a
failure. This results in the guest receiving an I/O error (rather than
the read hanging indefinitely) and if the error condition subsequently
clears, retries work as expected.

The simplest test is to put an ISO on a web server you have control over
and open it with qemu-io. Then move the ISO out of the way and attempt
to read some data - you should see behaviour matching the above.
Signed-off-by: NNick Thomas <nick@bytemark.co.uk>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

commit 52b8eb60 added a mutex,
but never initialized it.  This caused a segfault.
Reported-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Documentation states the num is measured in clusters, but its
actually measured in sectors
Signed-off-by: NDevin Nakamura <devin122@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Now that you can use cache=none for the output file in qemu-img, we should
properly align our buffers so that raw-posix doesn't have to use its (smaller)
bounce buffer.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

By introducing BlockDriverState compiling qcow2 with DEBUG_ALLOC and DEBUG_EXT
defined got broken.
Define a BdrvCheckResult structure locally which is now needed as the second
argument.

Also fix qcow2_read_extensions() needing BDRVQcowState.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch adds -drive cache=directsync for O_DIRECT | O_SYNC host file
I/O with no disk write cache presented to the guest.

This mode is useful when guests may not be sending flushes when
appropriate and therefore leave data at risk in case of power failure.
When cache=directsync is used, write operations are only completed to
the guest when data is safely on disk.

This new mode is like cache=writethrough but it bypasses the host page
cache.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This patch introduces bdrv_parse_cache_flags() which sets open flags
given a cache mode.  Previously this was duplicated in blockdev.c and
qemu-img.c.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This is a microblaze target specific function that belongs outside
of xilinx.h (which is a collection of target independent device model
instantiator functions)
Signed-off-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Added some missing #includes for this file. Previously this file
relied on its clients to pre-include its dependencies.
Signed-off-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

While in full-screen mode, the input focus naturally belongs to the SDL
window. Avoid dropping it when switching from absolute to relative
mouse mode.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We can express the VCPU thread wakeup with the stop mechanism, saving
both qemu_system_ready and the qemu_system_cond. For KVM threads, we can
just enter the main loop as long as the thread is stopped. The central
TCG thread is better held back before the loop as there can be side
effects of the services called even when all CPUs are stopped.

Creating VCPUs in stopped state will also be required for proper CPU
hotplugging support.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Memory region refactorings obsoleted them.

CC: Avi Kivity <avi@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Most VGA memory access modes require MMIO handling as they demand weird
logic to get a byte from or into the video RAM. However, there is one
exception: chain 4 mode with all memory planes enabled for writing. This
mode actually allows lineary mapping, which can then be combined with
dirty logging to accelerate KVM.

This patch accelerates specifically VBE accesses like they are used by
grub in graphical mode. Not only the standard VGA adapter benefits from
this, also vmware and spice in VGA mode.

CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Avi Kivity <avi@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

After the conversion to the new Memory API, vga_dirty_log_restart became
seriously pointless. Remove it from vmware-vga and and then finally drop
the service.

CC: Andrzej Zaborowski <balrogg@gmail.com>
CC: Avi Kivity <avi@redhat.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The code was disabled since day 1 of vmware-vga, and now it does not
even build anymore. Time for a cleanup.

CC: Andrzej Zaborowski <balrogg@gmail.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Elimiates 'vmsvga_value_write: guest runs Linux.' messages from the
console.

CC: Andrzej Zaborowski <balrogg@gmail.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fixes cold reset in vmware graphic modes. We need to split up the reset
function for this purpose, breaking out init-once bits.

Cc: Andrzej Zaborowski <balrogg@gmail.com>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If the polarity bit is set in the redirection table, the input level
simply has to inverted as it is low active in this case.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Polarity of external interrupts needs to be handled in the IOAPIC.
Passing it to the APIC is pointless. So remove all these arguments.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In TCG mode, iothread and vcpus run in lock-step. So it's pointless to
send a signal from qemu_cpu_kick to the vcpu thread - if we got here,
the receiver already left the vcpu loop.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Polling until select returns empty fdsets helps to reduce the switches
between iothread and vcpus. The benefit of this patch is best visible
when running an SMP guest on an SMP host in emulation mode.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If we call select without a timeout, it's more efficient to keep the
global mutex locked as we may otherwise just play ping pong with a
vcpu thread contending for it. This is particularly important for TCG
mode where we run in lock-step with the vcpu thread.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>