Signed-off-by: NMans Rullgard <mans@mansr.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

x86 was using additional CPU_DUMP_* flags, so make that configurable in
CPUClass::reset_dump_flags.

This adds reset logging for alpha, unicore32 and xtensa.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Since commit 878096ee (cpu: Turn
cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no
longer needed.

Add documentation and make the functions available through qemu/log.h
outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h
was not yet possible due to convoluted include paths, so that some
devices grow an implicit and unneeded dependency on qom/cpu.h for now.

Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: NRichard Henderson <rth@twiddle.net>
[AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This allows to move the call into CPUState's realizefn.
Therefore move the stub into libqemustub.a.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Make cpustats monitor command available unconditionally.

Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec()
arguments to CPUState.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The v7 ARM ARM specifies that the Large Physical Address
Extension requires implementation of the Multiprocessing
Extensions, so make our LPAE feature imply V7MP rather
than specifying both in the A15 CPU initfn.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Message-id: 1371127899-10364-1-git-send-email-peter.maydell@linaro.org

Convert the TCG ARM target to using an (index,value) list for migrating
coprocessors. The primary benefit of the (index,value) list is for
passing state between KVM and QEMU, but it works for TCG-to-TCG
migration as well and is a useful self-contained first step.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Port the ARM CPU save/load code to use VMState. Some state is
saved in a slightly different order to simplify things -- for
example arrays are saved one after the other rather than 'striped',
and we always save all 32 VFP registers even if the CPU happens
to only have 16.

Use one subsection for each feature.  This means that we don't need to
bump the version field each time that a new feature gets introduced.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
[PMM: fixed conflicts, updated to use cpu_class_set_vmsd(),  updated
 with new/removed fields since original patch, changed to use custom
 VMStateInfo for cpsr rather than presave/postload hooks, corrected
 subsection names so vmload doesn't fail]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Enable ARMCPUInfo to specify a custom class_init functions.
Introduce arm_v7m_class_init() and use it for "cortex-m3" model.

Instead of forwarding from arm_cpu_do_interrupt() to do_interrupt_v7m(),
override CPUClass::do_interrupt with arm_v7m_cpu_do_interrupt()
in arm_v7m_class_init().
Acked-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This removes a global per-target function and thus takes us one step
closer to compiling multiple targets into one executable.

It will also allow to override the interrupt handling for certain CPU
families.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The target-specific ENV_GET_CPU() macros have allowed us to navigate
from CPUArchState to CPUState. The reverse direction was not supported.
Avoid introducing CPU_GET_ENV() macros by initializing an untyped
pointer that is initialized in derived instance_init functions.

The field may not be called "env" due to it being poisoned.
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Ensures that a QOM-created ARMCPU is usable.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Turn arm_cpu_realize() into a QOM realize function, no longer called
via cpu.h prototype. To maintain the semantics of cpu_init(), set
realized = true explicitly in cpu_arm_init().

Move GDB coprocessor registration, CPU reset and vCPU initialization
into the realizefn.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

In the initial conversion of CPU models to QOM types, model names were
mapped 1:1 to type names. As a side effect this gained us a type "any",
which is now a device.

To avoid "-device any" silliness and to pave the way for compiling
multiple targets into one executable, adopt a <name>-<arch>-cpu scheme.
This leads to names like arm926-arm-cpu but is easiest to handle.

No functional changes for -cpu arguments or -cpu ? output.
Suggested-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This fixes -cpu arm-cpu asserting.

Cc: qemu-stable@nongnu.org
Acked-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Consolidate model checking into a new arm_cpu_class_by_name().

If the name matches an existing type, also check whether that type is
actually (a sub-type of) TYPE_ARM_CPU.

This fixes, e.g., -cpu tmp105 asserting.

Cc: qemu-stable <qemu-stable@nongnu.org>
Acked-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Note that target-alpha accesses this field from TCG, now using a
negative offset. Therefore the field is placed last in CPUState.

Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change.

Move common parts of mips cpu_state_reset() to mips_cpu_reset().

Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
[AF: Rebased onto ppc CPU subclasses and openpic changes]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The type_register_static() interface is documented as:

  type_register_static:
  @info: The #TypeInfo of the new type.

  @info and all of the strings it points to should exist for the life
  time that the type is registered.

But cpu_register() uses a stack variable for the 'info' argument, so it
has to use type_register() instead of type_register_static().
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Extend feature flags to 64 bits, as we've just run out of space
in the 32 bit integer we were using for them.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement the privileged-execute-never (PXN) translation table bit.
It is implementation-defined whether this is implemented, so we give
it its own ARM_FEATURE_ flag. LPAE requires PXN, so add also an
LPAE feature flag and the implication logic, as a placeholder
for actually implementing LPAE at a later date.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

All the uses of ARM_CPUID() to vary behaviour have now been
removed, so we can delete the ARM_CPUID_* macros now.
The one exception is the TI915T/925T, because of its odd behaviour
where the MIDR value can be changed at runtime.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAndreas Färber <afaerber@suse.de>

Convert the final ID registers to the new cp15 scheme.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the MPIDR to the new cp15 register scheme.
This includes giving it its own feature bit rather
than doing a CPUID value check.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the cp15 cache ID registers to the new scheme.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the cp15 crn=0 crm={1,2} features registers to
the new cp reg framework.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the cp15 crn=1 registers to the new scheme.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert cp15 crn=9 registers (mostly cache lockdown) to the new scheme.

Note that this change makes OMAPCP cores RAZ/WI the whole c9 space.  This is
a change from previous behaviour, but a return to the behaviour of commit
c3d2689d when OMAP1 support was first added -- subsequent commits have
clearly accidentally relegated the OMAPCP RAZ condition to only a subset of
the crn=9 space when adding support for other cores.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the cp15 crn=6 registers to the new scheme.
Note that this includes some minor tidyup: drop an unnecessary
underdecoding of op2 on OMAPCP cores, and only implement the
pre-v6 c6,c0,0,1 IFAR on the 1026 and not on the other ARMv5
cores, which didn't have it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the cp15 crn=7 registers to the new scheme.
Note that to do this we have to distinguish some registers
used on the ARM9 and ARM10 from some which are ARM1176
only. This is because the old code returned a value of 0
but always set the Z flag (by clearing env->ZF, since we
store the Z flag in CPUState inverted). This is inconsistent
with actual ARM CPU behaviour, which only sets flags for
reads to r15 and sets them based on the top bits of the result.
However it happened to work for the two common use cases for
cp15 crn=7 reads:
 * On ARM9 and ARM10 the cache clean-and-test operations are
typically done with a destination of r15 so that you can do
a "loop: mrc ... ; bne loop" to keep cleaning until the cache
is finally clean; always setting the Z flag means this loop
terminates immediately
 * on ARM1176 the Cache Dirty Status Register reads as zero
if the cache is dirty; returning 0 means this is correctly
implemented for QEMU

Since the new coprocessor register framework does the right
thing of always setting flags based on the returned result
for reads to r15, we need to split these up so that we can
return (1<<30) for the ARM9/ARM10 registers but 0 for the
ARM1176 one.

This allows us to remove the nasty hack which always sets Z.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the cp15 crn=15 (implementation specific) registers
to the new scheme.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the cp15 crn=2 registers (MMU page table control,
MPU cache control) to the new scheme.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Convert the v7 performance monitor cp15 registers to
the new scheme.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add new function register_cp_regs_for_features() as a place to
register coprocessor registers dependent on feature flags.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Initial infrastructure for data-driven registration of
coprocessor register implementations.

We still fall back to the old-style switch statements pending
complete conversion of all existing registers.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Make the 11MPCore report a valid value in its cache type register
(the previous value appears to have been incorrectly copied from
the 1136/1176). In particular, do not report that we have an
aliasing VIPT cache, because this causes Linux to attempt to use
the v6 block cache ops which the 11MPCore doesn't actually have.
(This causes no problems currently because we over-broadly provide
those ops on all cores, but prevents us correctly narrowing the
block ops down to those cores which actually implement them.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Move the A9 config_base_address cp15 register reset value to
ARMCPU. This should become a QOM property so that the Highbank
board can set it without having to pull in cpu-qom.h, but at
least this avoids the implicit dependency on reset ordering
that the previous workaround had.

Cc: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Make cpu_arm_init() return a QOM ARMCPU, so that we don't need to
obtain an ARMCPU through arm_env_get_cpu() in machine init code.
This requires to adjust the inclusion site of cpu-qom.h and in turn,
forward-looking, to homogenize its include order.

cpu_init() must still return a CPUARMState for backwards and
cross-target compatibility, so adjust the cpu_init macro.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Now that cpu_reset_model_id() has gone we can move the
reset code over to the class reset function and have cpu_state_reset
simply do a reset on the CPU QOM object.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NAndreas Färber <afaerber@suse.de>

Move cache ID register reset out of cpu_reset_model_id() by
creating a field for the reset value in ARMCPU and setting it
up in the cpu specific init functions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NAndreas Färber <afaerber@suse.de>