Retain the function value for now, to permit selective conversion of
its callers.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Acked-by: NKevin Wolf <kwolf@redhat.com>

When the argument is non-zero, qemu_opts_foreach() stops on callback
returning non-zero, and returns that value.

When the argument is zero, it doesn't stop, and returns the bit-wise
inclusive or of all the return values.  Funky :)

The callers that pass zero could just as well pass one, because their
callbacks can't return anything but zero:

* qemu_add_globals()'s callback qdev_add_one_global()

* qemu_config_write()'s callback config_write_opts()

* main()'s callbacks default_driver_check(), drive_enable_snapshot(),
  vnc_init_func()

Drop the parameter, and always stop.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Acked-by: NKevin Wolf <kwolf@redhat.com>

Failure to create an object with -object is a fatal error.  However,
we delay the actual exit until all -object are processed.  On the one
hand, this permits detection of genuine additional errors.  On the
other hand, it can muddy the waters with uninteresting additional
errors, e.g. when a later -object tries to reference a prior one that
failed.

We generally stop right on the first bad option, so do that for
-object as well.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

We print it once for each -device help.  Not helpful.  Stop after the
first one.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

It's reported once per -sandbox on.  Stop on the first failure, like
we do for other options.

Not fixed: "-sandbox on -sandbox off" should leave the sandbox off.
It doesn't.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

If a machine_init_done notifier is added late, as part of a hot-plugged
device, run it immediately.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The 'sleep' parameter sets the icount_sleep mode, which is enabled by
default. To disable it, add the 'sleep=no' parameter (or 'nosleep') to the
qemu -icount option.
Signed-off-by: NVictor CLEMENT <victor.clement@openwide.fr>
Message-Id: <1432912446-9811-3-git-send-email-victor.clement@openwide.fr>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Machines types can have different requirement for default ram
size. Introduce a member in the machine class and set the current
default_ram_size to 128MB.

For QEMUMachine types override the value during the registration of
the machine and for MachineClass introduce the generic class init
setting the default_ram_size.

Add helpers [K,M,G,T,P,E]_BYTE for better readability and easy usage
Signed-off-by: NNikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

valgrind complains about:
==9276== 13 bytes in 1 blocks are definitely lost in loss record 1,046 of 3,673
==9276==    at 0x4C2845D: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==9276==    by 0x2EAFBB: malloc_and_trace (vl.c:2556)
==9276==    by 0x64C770E: g_malloc (in /usr/lib64/libglib-2.0.so.0.3600.3)
==9276==    by 0x4A28BD: addr_to_string (vnc.c:123)
==9276==    by 0x4A29AD: vnc_socket_local_addr (vnc.c:139)
==9276==    by 0x4A9AFE: vnc_display_local_addr (vnc.c:3240)
==9276==    by 0x2EF4FE: main (vl.c:4321)
Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

This removes the following fields from QEMUMachine: family, alias,
reset, hot_add_cpu, units_per_default_bus, no_serial, no_parallel,
use_virtcon, use_sclp, no_floppy, no_cdrom, default_display,
compat_props, and hw_version.

The only users of those fields were already converted to use QOM and
MachineClass directly, so they are not needed anymore.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This adds opengl rendering support to the gtk ui, using egl.
It's off by default for now, use 'qemu -display gtk,gl=on'
to play with this.

Note that gtk got native opengl support with release 3.16.
There most likely will be a separate implementation for 3.16+,
using the native gtk opengl support.  This patch covers older
versions (and for the time being 3.16 too, hopefully without
rendering quirks).
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add new sdl2-gl.c file, with display
rendering functions using opengl.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Passing multiple -incoming options used to crash qemu (due to
an invalid state transition incoming->incoming).  Instead we now
take the last -incoming option, e.g.:

qemu-system-x86_64 -nographic -incoming tcp::4444 -incoming defer

ends up doing the defer.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Current default round-robin way of distributing VCPUs among
NUMA nodes might be wrong in case on multi-core/threads
CPUs. Making guests confused wrt topology where cores from
the same socket are on different nodes.

Allow a machine to override default mapping by providing
 MachineClass::cpu_index_to_socket_id()
callback which would allow it group VCPUs from a socket
on the same NUMA node.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

monitor_fdset_add_fd returns an AddfdInfo struct (used by the QMP
command add_fd).  Free it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Rename config option from "glx" to "opengl", glx will not be the only
option for opengl in near future.  Also switch over to pkg-config for
opengl support detection.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>

Now that -vnc goes through QemuOpts we can get vnc configuration
via -readconfig too.  So setting display_remote in the command
line parsing code doesn't cut it any more, we must check QemuOpts
instead to see whenever any vnc display is configured.
Reported-by: NMarkus Armbruster <armbru@redhat.com>
Tested-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

If the iothread lock isn't taken by the main thread, the RCU callbacks
might run concurrently with the main thread.  QEMU's not ready for that.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Tested-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Either 'once' option or 'order' option can take effect for -boot at
the same time, that is say initial startup processing can check only
one. And pc.c's set_boot_dev() fails when its boot order argument
is invalid. This patch provide a solution fix this problem:

 1. If "once" is given, register reset handler to restore boot order.

 2. Pass the normal boot order to machine creation.  Should fail when
   the normal boot order is invalid.

 3. If "once" is given, set it with qemu_boot_set().  Fails when the
   once boot order is invalid.

 4. Start the machine.

 5. On reset, the reset handler calls qemu_boot_set() to restore boot
   order.  Should never fail.
Suggested-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

This patch replaces time() function calls with calls to
qemu_clock_get_ns(QEMU_CLOCK_HOST). It makes such requests deterministic
in record/replay mode of icount.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20150227131102.11912.89850.stgit@PASHA-ISP>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Don't convert numbers to strings for use with qemu_opt_set(), simply
use qemu_opt_set_number() instead.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().

Most of its users assume the function can't fail.  Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.

Just two users remain, in util/qemu-config.c.  Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Return the Error object instead of reporting it with
qerror_report_err().

Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.

Turns out all callers outside its unit test assume that.  We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Return the Error object instead of reporting it with
qerror_report_err().

Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.

Turns out all callers outside its unit test assume that.  We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Return the Error object instead of reporting it with
qerror_report_err().

Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.

Turns out all callers outside its unit test assume that.  We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Produce more human readable error messages and fix few spelling
mistakes.

Also remove a redundant check for the max memory size.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

This function does some initialization that needs to be done after
machine init. The function may be eventually removed if we move the
CPUState.numa_node initialization to the CPU init code, but while the
function exists, lets give it a name that makes sense.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Renaming set_numa_nodes() and numa_init_func() to parse_numa_opts() and
parse_numa() makes the purpose of those functions clearer.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

This allows us to make numa_init_func() static.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

There's no need to zero-initialize globals, they are automatically
initialized to zero.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Not all sysemu.h users need the NUMA declarations, and keeping them in a
separate file makes it easier to see what are the interfaces provided by
numa.c.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(),
and sometimes COMMAND pointlessly differs in spelling.

Normalize to hmp_COMMAND(), where COMMAND is exactly the command name
with '-' replaced by '_'.

Exceptions:

* do_device_add() and client_migrate_info() *not* renamed to
  hmp_device_add(), hmp_client_migrate_info(), because they're also
  QMP handlers.  They still need to be converted to QAPI.

* do_memory_dump(), do_physical_memory_dump(), do_ioport_read(),
  do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(),
  hmp_i(), hmp_o(), because those names are too cryptic for my taste.

* do_info_help() renamed to hmp_info_help() instead of hmp_info(),
  because it only covers help.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP.  It should not be used
elsewhere.  Replace by error_report_err() in initial startup helpers
machine_set_property() and object_create().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Coccinelle semantic patch:

    @@
    expression E;
    @@
    -    error_report("%s", error_get_pretty(E));
    -    error_free(E);
    +    error_report_err(E);
    @@
    expression E, S;
    @@
    -    error_report("%s", error_get_pretty(E));
    +    error_report_err(E);
    (
         exit(S);
    |
         abort();
    )

Trivial manual touch-ups in block/sheepdog.c.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

valgrind complains about:
==42062== 16 bytes in 1 blocks are definitely lost in loss record 387 of 1,048
==42062==    at 0x402DCB2: malloc (vg_replace_malloc.c:299)
==42062==    by 0x40C1BE3: g_malloc (in /usr/lib64/libglib-2.0.so.0.3800.2)
==42062==    by 0x40DA133: g_slice_alloc (in /usr/lib64/libglib-2.0.so.0.3800.2)
==42062==    by 0x40DB2E5: g_slist_prepend (in /usr/lib64/libglib-2.0.so.0.3800.2)
==42062==    by 0x801637FF: object_class_get_list_tramp (object.c:690)
==42062==    by 0x40A96C9: g_hash_table_foreach (in /usr/lib64/libglib-2.0.so.0.3800.2)
==42062==    by 0x80164885: object_class_foreach (object.c:665)
==42062==    by 0x80164975: object_class_get_list (object.c:698)
==42062==    by 0x800100A5: machine_parse (vl.c:2447)
==42062==    by 0x800100A5: main (vl.c:3756)

Lets free machines in case of mc.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

monitor_parse() desugars --monitor, --qmp and -qmp-pretty to --mon.
The ID it picks can clash with a user-specified ID.  When it happens,
the error message is misleading.

Reproducer:

    $ qemu --mon id=compat_monitor0 --monitor stdio

Message before the patch:

    duplicate chardev: compat_monitor0

There's no "duplicate chardev" here.  The problem is a duplicate
monitor ID.  Moreover, the message provides no clue which option
caused the problem.  The patch changes the message to:

    qemu: --monitor stdio: Duplicate ID 'compat_monitor0' for mon

monitor_parse() is also used for creating a default monitor, but
that's not done when the user specifies a monitor, so an ID clash is
impossible then.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

This patch switches vnc over to QemuOpts, and it (more or less
as side effect) allows multiple vnc server instances.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

DisplayState isn't used anywhere, drop it.  Add the vnc server ID as
parameter instead, so it is possible to specify the server instance.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NGonglei <arei.gonglei@huawei.com>

The misalignment was caused by tabs which were used instead of spaces.
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>