This patch fixes typo in pcibus_get_dev_path().
Without this patch, the result of pcibus_get_dev_path() isn't unique.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

PCI_BRIDGE_CTL_DISCARD_STATUS (bit 10 in bridge control register)
is W1C so we should not make it writeable, otherwise the assert(!(wmask
& w1cmask)) in pci_default_write_config() is hit
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reported-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Tested-by: NIsaku Yamahata <yamahata@valinux.co.jp>

PCIDevice::rom_file is leaked.
PCIDevice::rom_file is allocated in pci_qdev_init(), but not freed anywhere.
free it in qemu_unregister_device().
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

use qemu_malloc() instead of direct use of malloc().
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

deassert intx on device reset.
So far pci_device_reset() is used for system reset.
In that case, interrupt controller is reset at the same time so that
all irq is are deasserted.
But now pci bus reset/flr is supported, and in that case irq needs to be
disabled explicitly.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Patch a6a7005d generated
broken device paths. We snprintf with a length shorter
than the output, so the last character is discarded and replaced
by the null byte. Fix it up by snprintf to a buffer
which is larger by 1 byte and then memcpy the data (without
the null byte) to where we need it.
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch adds a field to PCIDeviceInfo to tag devices as being
not hotpluggable.  Any attempt to plug-in or -out such a device
will throw an error.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The device path used for migration is currently broken for
for all devices behind a nested bridge.

Replace this by a hierarchical list of slot/function numbers, walking
the path from root down to device. Add :00 after the domain number
so that if there are no nested bridges, this is compatible
with what we have now.

Note: as pointed out by Gleb, using openfirmware paths
might be cleaner, doing this would break compatibility though,
and the IDs used are not guest or user visible at all,
so breaking the compatibility is probably not worth it.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch introduce a helper function to get PCIDevice from qdev id.
This function will be used later.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Support flr: trigger device reset on flr config write.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Using bus numbers in migration is clearly wrong as
they are guest assigned. Not really sure what the
right thing to do is, for now stick 0 in there so things
keep working for non-nested setups, add a TODO.

We also probably have to mark nested bridges as non-migrateable
until this is fixed?
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NAlex Williamson <alex.williamson@redhat.com>

Extend -option-rom command to have additional parameter ,bootindex=.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

msi depends on pci but pci should not depend on msi.
The only dependency we have is a recent addition
of pci_msi_ functions, IMO they add little enough to
open-code in the small number of users.

Follow-up patches add more cleanups.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>

pcie aer needs SERR bit to be writable, and the PCI spec requires
this as well.  For compatibility, introduce compat global property
command_serr_enable and make this bit readonly for a pre 0.14 pc
machine.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Take into account secondary bus reset bit for
bus walk: devices behind a reset bus should not
respond to configuration cycles.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

PCI devices with different vendor or device ids sometimes share
the same rom code. Only the ids and the checksum
differs in a boot rom for such devices.

The i825xx ethernet controller family is a typical example
which is implemented in hw/eepro100.c. It uses at least
3 different device ids, so normally 3 boot roms would be needed.

By automatically patching vendor id and device id (and the checksum)
in qemu, all emulated family members can share the same boot rom.

VGA bios roms are another example with different vendor and device ids.

Only qemu's built-in default rom files will be patched.

v2:
    * Patch also the vendor id (and remove the sanity check for vendor id).

v3:
    * Don't patch a rom file when its name was set by the user.
      Thus we avoid modifications of unknown rom data.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Bits 12 to 15 in bridge control register are reserver and must be
read-only zero, curent mask is 0xffff which makes them writeable. Fix
this up by using symbolic bit names for writeable bits instead of a
hardcoded constant.

Fix a comment w1mask -> w1cmask as well.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch adds W1C bit support in the initialization/reset of pci
status registers.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch fixes hot unplug of cold plugged devices
(those present at system start), which got broken by
5beb8ad5 .
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NCam Macdonell <cam@cs.ualberta.ca>
Tested-by: NCam Macdonell <cam@cs.ualberta.ca>
Reported-by: Cam Macdonell <cam@cs.ualberta.ca>.

pcibus_dev_print() was erroneously retrieving the device bus
number from the secondary bus number offset of the device
instead of the bridge above the device.  This ends of landing
in the 2nd byte of the 3rd BAR for devices, which thankfully
is usually zero.

Note: pcibus_get_dev_path() copied this code,
inheriting the same bug.  pcibus_get_dev_path() is used for
ramblock naming, so changing it can effect migration.  However,
I've only seen this byte be non-zero for an assigned device,
which can't migrate anyway, so hopefully we won't run into
any issues.

This patch does not touch pcibus_get_dev_path, as
bus number is guest assigned for nested buses,
so using it for migration is broken anyway.
Fix it properly later.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch fixes hot unplug of cold plugged devices
(those present at system start), which got broken by
5beb8ad5 .
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NCam Macdonell <cam@cs.ualberta.ca>
Tested-by: NCam Macdonell <cam@cs.ualberta.ca>
Reported-by: Cam Macdonell <cam@cs.ualberta.ca>.

pcibus_dev_print() was erroneously retrieving the device bus
number from the secondary bus number offset of the device
instead of the bridge above the device.  This ends of landing
in the 2nd byte of the 3rd BAR for devices, which thankfully
is usually zero.

Note: pcibus_get_dev_path() copied this code,
inheriting the same bug.  pcibus_get_dev_path() is used for
ramblock naming, so changing it can effect migration.  However,
I've only seen this byte be non-zero for an assigned device,
which can't migrate anyway, so hopefully we won't run into
any issues.

This patch does not touch pcibus_get_dev_path, as
bus number is guest assigned for nested buses,
so using it for migration is broken anyway.
Fix it properly later.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

- save/restore must not check w1c bits
  since they are in fact guest controlled
- clear w1c bits on reset

Note: for express there are different kinds of
reset, some leave part of config space alone.
We will likely need a sticky bit mask to implement this.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

use pci_clear_bit_word() in pci_device_reset() where appropriate.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

this patch implements helper functions to handle msi-x and msi
uniformly.
They will be used later.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Clear w1cmask when deleting a pci capability.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

multifuction -> multifunction
successfull -> successful.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>

Implement RW1C register framework.
With this patch, it would be easy to implement
W1C(Write 1 to Clear) register by just setting w1cmask.
Later RW1C register will be used by pcie.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Extract range functions from pci.h. These will be used by later patches
by non-PCI devices. Adjust current users.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Make type uint8_t from int because PCIIORegion::type is uint8_t.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>

Abort when invalid value for region_num is passed to pci_register_bar.
That is caller's bug. Abort instead of silently ignoring invalid value.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This patch sorts out invalid use of pcibus_t.

In pci_register_bar(), pcibus_t wmask is used.  It should,
however, be uint64_t because it is used to set
pci configuration space value(PCIDevice::wmask)
by pci_set_quad() or pci_set_long().
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

make pci_parse_devfn() aware of func. With func = NULL it behave as before.
This will be used later.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

call hotplug callback even when not hotplug case for later use.
And move hotplug check into hotplug callback.
PCIE slot needs this for card presence detection.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

By making pci_add_capability() the special case of
pci_add_capability_at_offset() of offset = 0,
consolidate pci_add_capability_at_offset() into pci_add_capability().

Cc: Stefan Weil <weil@mail.berlios.de>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Move pci bridge related code into pci_bridge.c from pci.c
for further enhancement. pci.c is big enough now, so split it out.
No code change but exporting some accesser functions.

In fact, few pci bridge functions stays in pci.c.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

move out pci internal structures, PCIBus, PCIBridge and pci_bus_info into
private header file, pci_internals.h.
This is a preparation. Later pci bridge implementation will be
split out form pci.c into pci_bridge.c.
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

bridge config write should trigger updates
on the secondary bus. never on the primary bus.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>