BlockBackends use it to get a back pointer from BdrvChild to
BlockBackend in any BdrvChildRole callbacks.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>

This patch changes where the throttling state is stored (used to be the
BlockDriverState, now it is the BlockBackend), but it doesn't actually
make it a BB level feature yet. For example, throttling is still
disabled when the BDS is detached from the BB.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>

As a first step towards moving I/O throttling to the BlockBackend level,
this patch changes all pointers in struct ThrottleGroup from referencing
a BlockDriverState to referencing a BlockBackend.

This change is valid because we made sure that throttling can only be
enabled on BDSes which have a BB attached.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>

Some features, like I/O throttling, are implemented outside
block-backend.c, but still want to keep information in BlockBackend,
e.g. list entries that allow keeping a list of BlockBackends.

In order to avoid exposing the whole struct layout in the public header
file, this patch introduces an embedded public struct where such
information can be added and a pair of functions to convert between
BlockBackend and BlockBackendPublic.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>

It was already true in principle that a throttled BDS always has a BB
attached, except that the order of operations while attaching or
detaching a BDS to/from a BB wasn't careful enough.

This commit breaks graph manipulations while I/O throttling is enabled.
It would have been possible to keep things working with some temporary
hacks, but quite cumbersome, so it's not worth the hassle. We'll fix
things again in a minute.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Acked-by: NStefan Hajnoczi <stefanha@redhat.com>

trivial patches for 2016-05-18

# gpg: Signature made Wed 18 May 2016 13:04:43 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2016-05-18:
  Fix some typos found by codespell
  9p: drop unused declaration from coth.h
  smbios: fix typo
  accel: make configure_accelerator return void
  configure: Use uniform description for devel packages
  ipack: Update e-mail address
  util: fix comment typos
  qdict: fix unbounded stack warning for qdict_array_entries
  Fix typo in variable name (found and fixed by codespell)
  vl: fix comment about when parsing cpu definitions
  loader: fix potential memory leak
  remove comment for nonexistent structure member
  s390: remove misleading comment
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Commit "ebac1202 virtio-9p: use QEMU thread pool" dropped function
v9fs_init_worker_threads.
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The spec says: "on paragraph (16-byte) boundaries"
Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Return the negated value of accel_initialised is meaningless,
and the caller vl doesn't check it.
Signed-off-by: NWei Jiangang <weijg.fnst@cn.fujitsu.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

As all other devel packages are written in the form "name devel",
use this form for libcap devel and libattr devel, too.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

I'm not really using the old one anymore.
Signed-off-by: NAlberto Garcia <berto@igalia.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NWei Jiangang <weijg.fnst@cn.fujitsu.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Here we use one g_strdup_printf() to replace the two stack allocated
array, considering it's more convenient, safe, and as long as it's
called rarely only when quorum device opens. This will remove the
unbound stack warning when compiling with "-Wstack-usage=1000000".
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NStefan Weil <sw@weilnetz.de>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

machine->init() was replaced with machine_class->init()
in 958db90c.
Signed-off-by: NWei Jiangang <weijg.fnst@cn.fujitsu.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Signed-off-by: NCao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

The comment talks about a non-ELF object while the
example gives ELF object.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

First batch of s390x patches for 2.7:
- The new machine for 2.7
- Make use of the runtime instrumentation support introduced in
  the kernel
- Enhance our ipl (boot) process: We can now start from devices
  in subchannel sets > 0 as well. As a bonus, the conversion to
  diag308 in the bios allows us to get rid of the gr7 hack.
- Xiaoqiang Zhao's SCLP qomification patches
- Several fixes in the s390x pci implementation

# gpg: Signature made Tue 17 May 2016 15:35:32 BST using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"

* remotes/cohuck/tags/s390x-20160517:
  s390x/pci: remove whitespace
  s390x/pci: add length checking for pci sclp handlers
  s390x/pci: enhance mpcifc_service_call
  s390x/pci: fix s390_pci_sclp_deconfigure
  s390x/pci: introduce S390PCIBusDevice.iommu_enabled
  s390x/pci: export pci_dereg_ioat and pci_dereg_irqs
  s390x/pci: separate s390_pcihost_iommu_configure function
  s390x/pci: separate s390_sclp_configure function
  s390x/pci: fix reg_irqs()
  hw/char: QOM'ify sclpconsole.c
  hw/char: QOM'ify sclpconsole-lm.c
  s390x/ipl: Remove redundant usage of gr7
  s390-ccw.img: rebuild image
  pc-bios/s390-ccw: Get device address via diag 308/6
  s390x/ipl: Add ssid field to IplParameterBlock
  s390x/ipl: Provide ipl parameter block
  s390x/ipl: Add type and length checks for IplParameterBlock values
  s390x/ipl: Extend the IplParameterBlock struct
  s390x: enable runtime instrumentation
  s390x: add compat machine for 2.7
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix indentation of PciCfgSccb struct.
Signed-off-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

The configure/deconfigure sclp commands need a SCCB with a length of
at least 16. Indicate in the response code if this is not fulfilled.
Signed-off-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Enhance error handling for mpcifc_service_call() to propagate errors
to guest by setting status codes or triggering program interrupts.
Signed-off-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

When deconfiguring a s390 pci device, we should deconfigure the
corresponding IOMMU memory region and the IRQs for the device.
Signed-off-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

We introduce iommu_enabled field for S390PCIBusDevice struct to
track whether the iommu has been enabled for the device. This allows
us to stop temporarily changing ->configured while en/disabling the
iommu and to do conditional cleanup later.
Signed-off-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

dereg_irqs and dereg_ioat are needed by external functions. Let's
rename and export both of them in s390-pci-inst.h.
Signed-off-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Split s390_pcihost_iommu_configure() into separate functions for
configuring and deconfiguring in order to make the code more readable.
Signed-off-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Split s390_sclp_configure() into separate functions for sclp
configuring and deconfiguring in order to make the code more readable.
Signed-off-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

In reg_irqs(), present code assumes that map_indicator() always issues
successfully. Let's check it and return the error to caller in order to
inform guest.
Signed-off-by: NYi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: NDong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Drop the DO_UPCAST macro
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1459237645-17227-7-git-send-email-zxq_yx_007@163.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Drop the DO_UPCAST macro
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1459237645-17227-6-git-send-email-zxq_yx_007@163.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

We don't need to pass device address for pc-bios using gr7 anymore as
the pcbios completely relies on diag308 now, so we can remove it from
qemu. devno, ssid and cssid are migrated but the value was never reused,
so we can safely ignore these fields and migrate 0.
Signed-off-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Contains the following change:

pc-bios/s390-ccw: Get device address via diag 308/6
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

To IPL from a device, pc-bios receives from qemu a device address via
general register 7. The better way to do it is to use diag308/6
instruction which returns so called
"IplParameterBlock". IplParameterBlock contains the device address for
IPL and additional parameters that can be used by pc-bios.

This patch allows pc-bios to get device address via diag308/6 and
doesn't use gr7 passed boot information anymore.
Signed-off-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Add the ssid field to the ipl parameter block struct and fill it when
necessary so the guest can use it.
Signed-off-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Right now we return the ipl parameter block only if the guest
specified one. Let's fill in the parameter block when bootindex
parameter is available and not booting from an external kernel.
Signed-off-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

We can check for valid type and lengths of the IplParameterBlock fields
when receiving the struct from the guest.

Length of the IplParameterBlock can be less than 4K. To play safe we can
read and write only required amount of data.
Signed-off-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenband <dahi@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>