As a "utility", it only supported ppc, and in a way that other
tcg backends provided directly in tcg-target.h.  Removing this
disparity is easier now that the two ppc backends are merged.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Instead of getting backup auxv data from the env pointer given to main,
read it from /proc/self/auxv.  We can do this at any time, so we're not
tied to any ordering wrt a call to qemu_init_auxval from main.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

The other tcg backends that support 32- and 64-bit modes
use the 32-bit name for the port.  Follow suit.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Vectoring the 32-bit build to the ppc64 directory.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Good enough to run some instructions before things go awry.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Now passes tcg_add_target_add_op_defs assertions, but
not complete enough to function.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Just enough to compile, assuming you edit config-host.mak manually.
It will still abort at runtime, due to missing brcond2, setcond2, mulu2.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

All sorts of confusion on argument ordering.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

The new ELFv2 ABI, used by default on powerpc64le-linux hosts,
introduced some changes that are incompatible with code currently
generated by the ppc64 TGC target.  In particular, we no longer
use function descriptors.

This patch adds support for the ELFv2 ABI in the ppc64 TGC
function call and function prologue sequences.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NUlrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

The correct test uses the _CALL_AIX macro, not a host-specific macro.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

In preparation for supporting other ABIs.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

The calling convention reserves space for the 8 register parameters on
the stack, so using only 6*8=48 as the offset was wrong.  We never saw
this bug because we don't have any helpers with more than 5 parameters.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

These values are private to tcg.c; we don't need to expose
this nonsense to the translators.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Rather than using tcg_out32 and opcodes directly.  This allows us
to remove LD_ADDR and CMP_L macros.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

In order to be able to use tcg_out_ld/st sensibly with scratch
registers, assert only when we'd incorrectly clobber a scratch.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Code movement only.  This will allow us to make use of the
other tcg_out_* functions in tidying their implementations.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Using more appropriate _PTR or _REG where possible.
Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Tested-by: NTom Musta <tommusta@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Block pull request

# gpg: Signature made Mon 23 Jun 2014 09:53:49 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  block: asynchronously stop the VM on I/O errors
  vl: allow other threads to do qemu_system_vmstop_request
  sheepdog: fix NULL dereference in sd_create
  QemuOpts: check NULL opts in qemu_opt_get functions
  block: m25p80: Support read only bdrvs.
  block: m25p80: sync_page(): Deindent function body.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/mcayland/qemu-sparc:
  apb: Fix out-of-bounds array write access
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/mcayland/qemu-openbios:
  Update OpenBIOS images
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

move generic chardev APIs to sysemu/char.h, to make them available to
callers which can not depend on the whole of ui/console.h.
This fixes a build error on systems without pixman-devel:

./configure --disable-tools --disable-docs --target-list=arm-linux-user
...
pixman            none
...
make
...
In file included from
/data/home/nchip/linaro/qemu/include/ui/console.h:4:0,
                 from /data/home/nchip/linaro/qemu/stubs/vc-init.c:2:
/data/home/nchip/linaro/qemu/include/ui/qemu-pixman.h:14:20: fatal
error: pixman.h: No such file or directory
 #include <pixman.h>
                    ^
compilation terminated.
Reported-by: NRiku Voipio <riku.voipio@iki.fi>
Tested-by: NRiku Voipio <riku.voipio@iki.fi>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Message-id: 1403508500-32691-1-git-send-email-mst@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

With virtio-blk dataplane, I/O errors might occur while QEMU is
not in the main I/O thread.  However, it's invalid to call vm_stop
when we're neither in a VCPU thread nor in the main I/O thread,
even if we were to take the iothread mutex around it.

To avoid this problem, we can raise a request to the main I/O thread,
similar to what QEMU does when vm_stop is called from a CPU thread.
We know that bdrv_error_action is called from an AIO callback, and
the moment at which the callback will fire is not well-defined; it
depends on the moment at which the disk or OS finishes the operation,
which can happen at any time.  Note that QEMU is certainly not in a CPU
thread and we do not need to call cpu_stop_current() like vm_stop() does.

However, we need to ensure that any action taken by management will
result in correct detection of the error _and_ a running VM.  In particular:

- the event must be raised after the iostatus has been set, so that
"info block" will return an iostatus that matches the event.

- the VM must be stopped after the iostatus has been set, so that
"info block" will return an iostatus that matches the runstate.

The ordering between the STOP and BLOCK_IO_ERROR events is preserved;
BLOCK_IO_ERROR is documented to come first.

This makes bdrv_error_action() thread safe (assuming QMP events are,
which is attacked by a separate series).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

There patch protects vmstop_requested with a lock and introduces
qemu_system_vmstop_request_prepare.

Together with the new call to qemu_vmstop_requested in vm_start,
qemu_system_vmstop_request_prepare avoids a race where the VM could remain
stopped even though the iostatus of a block device has already been set
(for example).

qemu_system_vmstop_request_prepare however also lets the caller thread
delay observation of the state change until it has itself communicated
that change to the user.  This delay avoids any possibility of a wrong
reordering of the BLOCK_IO_ERROR event and the subsequent STOP event.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Following command

qemu-img create -f qcow2 sheepdog:test 20g

will cause core dump because aio_context is NULL in sd_create. We should
initialize it by qemu_get_aio_context() to avoid NULL dereference.

Cc: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NLiu Yuan <namei.unix@gmail.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Some places will call bdrv_create_file(filename, NULL, &local_err), where
opts is NULL. Check NULL in qemu_opt_get and qemu_opt_get_*_del functions,
to avoid extra effort of checking opts before calling them every time.
Signed-off-by: NChunyan Liu <cyliu@suse.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

By just never doing write-backs. This is completely invisible to the
guest, as the entire storage area is implemented as device state (at
realize time the entire drive is read in).
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

sync_page() was conditionalizing it's whole fn body on the bdrv being
non-null. Just return for the function immediately on NULL brdv and
get rid of the big if.

Makes implementation consistent with flash_zynq_area().
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Update OpenBIOS images to SVN r1306 built from submodule.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

The array regs is declared with IOMMU_NREGS (3) elements and accessed
using IOMMU_CTRL (0) and IOMMU_BASE (8). In most cases, those values
are right shifted before being used as an index which results in indices
0 and 1. In one case, this right shift was missing for IOMMU_BASE which
results in an out-of-bounds write access with index 8.

The patch adds the missing shift operation also for IOMMU_CTRL where
it is needed only for cosmetic reasons.
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

Add VMStateDescription for GT64120 PCI emulation used by the Malta
platform, to allow it to work with savevm/loadvm and live migration.

The entire register array is saved/restored using VMSTATE_UINT32_ARRAY
(fixed length GT_REGS = 1024).
Signed-off-by: NSanjay Lal <sanjayl@kymasys.com>
[james.hogan@imgtec.com: Convert to VMState]
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Andreas Färber <afaerber@suse.de>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

In order to avoid access to the CPUMIPSState structure in the
translator, keep a copy of CP0_Config1 into DisasContext. The whole
register is read-only so it can be copied as a single value.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

* remotes/kvm/uq/master:
  hw/mips: malta: Don't boot from flash with KVM T&E
  MAINTAINERS: Add entry for MIPS KVM
  target-mips: Enable KVM support in build system
  hw/mips: malta: Add KVM support
  hw/mips: In KVM mode, inject IRQ2 (I/O) interrupts via ioctls
  target-mips: Call kvm_mips_reset_vcpu() from mips_cpu_reset()
  target-mips: kvm: Add main KVM support for MIPS
  kvm: Allow arch to set sigmask length
  target-mips: get_physical_address: Add KVM awareness
  target-mips: get_physical_address: Add defines for segment bases
  hw/mips: Add API to convert KVM guest KSEG0 <-> GPA
  hw/mips/cputimer: Don't start periodic timer in KVM mode
  target-mips: Reset CPU timer consistently
  KVM: Fix GSI number space limit
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

pc,pci,virtio,hotplug fixes, enhancements

numa work by Hu Tao and others
memory hotplug by Igor
vhost-user by Nikolay, Antonios and others
guest virtio announcements by Jason
qtest fixes by Sergey
qdev hotplug fixes by Paolo
misc other fixes mostly by myself
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

* remotes/mst/tags/for_upstream: (109 commits)
  numa: use RAM_ADDR_FMT with ram_addr_t
  qapi/string-output-visitor: fix bugs
  tests: simplify code
  qapi: fix input visitor bugs
  acpi: rephrase comment
  qmp: add ACPI_DEVICE_OST event handling
  qmp: add query-acpi-ospm-status command
  acpi: implement ospm_status() method for PIIX4/ICH9_LPC devices
  acpi: introduce TYPE_ACPI_DEVICE_IF interface
  qmp: add query-memory-devices command
  numa: handle mmaped memory allocation failure correctly
  pc: acpi: do not hardcode preprocessor
  qmp: clean out whitespace
  qdev: recursively unrealize devices when unrealizing bus
  qdev: reorganize error reporting in bus_set_realized
  qapi: fix build on glib < 2.28
  qapi: make string output visitor parse int list
  qapi: make string input visitor parse int list
  tests: fix memory leak in test of string input visitor
  hmp: add info memdev
  ...

Conflicts:
	include/hw/i386/pc.h
[PMM: fixed minor conflict in pc.h]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>