Rearrange the GIC and NVIC so both are straightforward
subclasses of a common class, rather than having the NVIC
source file textually include arm_gic.c.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Remove more NVIC ifdefs by moving the code to setup the CPU interface
memory regions into the GIC specific arm_gic_init() function rather
than the gic_init() function. Rename the latter to more closely
reflect what it's now actually doing.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Make the minor tweaks to interrupt numbering used by the NVIC
a runtime setting rather than a compile time one, so we can
drop more NVIC ifdefs.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The GIC spec says that the CPU target registers should RAZ/WI
for uniprocessor implementations. Implement this, which also
conveniently lets us drop an NVIC ifdef.

Annoyingly, the 11MPCore's GIC is the odd one out, since
it always has these registers, even in uniprocessor configs.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

GIC behaviour can be different between revision 1 and
2 of the architectural GIC specification; we also have
to handle the legacy 11MPCore GIC, which is different
again in some places. Introduce a qdev property so we
can behave appropriately.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement the NVIC specific register areas using a set of
overlaid MemoryRegions in a container, rather than by having
the arm_gic read/write functions use special purpose callbacks.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Move the NVIC specific bits of reset to the NVIC's own
reset function, rather than using ifdefs in the common
arm_gic reset.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Drop the special casing of NCPU=1 for the NVIC. This slightly
increases the amount of memory used by its state structure,
but removes some ifdeffery and means we can safely move the
GIC state into a common subclass structure.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Remove some NVIC ifdefs from the gic_state struct and its
state save/load functions. This means there are some fields
in it which are present for the NVIC but not used, but means
it always has the same layout and can be pulled out into a
common subclass.

Note that the addition of irq_target[] to the save/load
struct for the NVIC requires a vmstate version bump.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAndreas Färber <afaerber@suse.de>

mimicing -> mimicking
thei -> the
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

New IRQ gate consists of n_in input qdev gpio lines and one
output sysbus IRQ line. The output IRQ level is formed as OR
between all gpio inputs.
Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* afaerber-or/qom-next-2: (22 commits)
  qom: Push error reporting to object_property_find()
  qdev: Remove qdev_prop_exists()
  qbus: Initialize in standard way
  qbus: Make child devices links
  qdev: Connect busses with their parent devices
  qdev: Convert busses to QEMU Object Model
  qdev: Move SysBus initialization to sysbus.c
  qdev: Use wrapper for qdev_get_path
  qdev: Remove qdev_prop_set_defaults
  qdev: Clean up global properties
  qdev: Move bus properties to abstract superclasses
  qdev: Move bus properties to a separate global
  qdev: Push "type" property up to Object
  arm_l2x0: Rename "type" property to "cache-type"
  m48t59: Rename "type" property to "model"
  qom: Assert that public types have a non-NULL parent field
  qom: Drop type_register_static_alias() macro
  qom: Make Object a type
  qom: Add class_base_init
  qom: Add object_child_foreach()
  ...

* qmp/queue/qmp:
  build: install qmp-commands.txt
  Add rate limiting of RTC_CHANGE, BALLOON_CHANGE & WATCHDOG events
  Add event notification for guest balloon changes
  Fix some more license versions (GPL2+ instead of GPL2)
  monitor: Fix memory leak with readline completion
  qmp: do not include monitor.h from qapi-types-core.h
  qmp: include monitor.h when needed
  kvm: add missing include files

* kwolf/for-anthony: (39 commits)
  qemu-iotests: add 036 autoclear feature bit test
  qemu-iotests: add qcow2.py set-feature-bit command
  fdc-test: introduced qtest read_without_media
  fdc: fix implied seek while there is no media in drive
  qcow2: fix autoclear image header update
  xen: Don't peek behind the BlockDriverState abstraction
  xen: Don't change -drive if=xen device name during machine init
  block: Replace bdrv_get_format() by bdrv_get_format_name()
  qemu-img: document qed format on qemu-img man page
  qemu-iotests: COW with many AIO requests on the same cluster
  qemu-iotests: Some backing file COW tests
  qcow2: Fix avail_sectors in cluster allocation code
  qcow2: Simplify calculation for COW area at the end
  qcow2: always operate caches in writeback mode
  ide: support enable/disable write cache
  block: always open drivers in writeback mode
  block: add bdrv_set_enable_write_cache
  block: copy enable_write_cache in bdrv_append
  savevm: flush after saving vm state
  block: flush in writethrough mode after writes
  ...

* mst/tags/for_anthony:
  pci_bridge_dev: fix error path in pci_bridge_dev_initfn()
  qdev: release parent properties on dc->init failure
  msi: Use msi/msix_present more consistently
  msi: Invoke msi/msix_write_config from PCI core
  msi: Guard msi/msix_write_config with msi_present
  msi: Invoke msi/msix_reset from PCI core
  msi: Guard msi_reset with msi_present
  ahci: Clean up reset functions
  intel-hda: Fix reset of MSI function
  ahci: Fix reset of MSI function
  rtl8139: honor RxOverflow flag in can_receive method
  shpc: unparent device before free

* sweil/for-anthony:
  Fix some more license versions (GPL2+ instead of GPL2)
  dump: Fix license version (GPL2+ instead of GPL2)
  configure: Fix build for some versions of glibc (9pfs)
  monitor: Fix memory leak with readline completion

Avoids duplicated error_set().
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[AF: Also drop error_set() in object_property_del().]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Can be replaced everywhere with object_property_find().
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Move code to an initfn and finalizer.
Replace do_qbus_create_inplace() with qbus_realize().
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Make qbus children show up as link<> properties.  There is no stable
addressing for qbus children so we use an unstable naming convention.

This is okay in QOM though because the composition name is expected to
be what's stable.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This makes SysBus part of the root hierarchy and all busses children of
their respective parent DeviceState.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This is far less interesting than it sounds.  We simply add an Object to each
BusState and then register the types appropriately.  Most of the interesting
refactoring will follow in the next patches.

Since we're changing fundamental type names (BusInfo -> BusClass), it all needs
to convert at once.  Fortunately, not a lot of code is affected.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[AF: Made all new bus TypeInfos static const.]
[AF: Made qbus_free() call object_delete(), required {qom,glib}_allocated]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

TYPE_SYSTEM_BUS will be local to hw/sysbus.c, so move existing references
to main_system_bus and system_bus_info there.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This makes it easier to remove it from BusInfo.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[AF: Drop now unnecessary NULL initialization in scsibus_get_dev_path()]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Instead, qdev_property_add_static can set the default.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Now that global properties do not depend on buses anymore, set
them directly in the device instance_init function.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

In qdev, each bus in practice identified an abstract superclass, but
this was mostly hidden.  In QOM, instead, these abstract classes are
explicit so we can move bus properties there.

All bus property walks are removed, and all device property walks
are changed to look along the class hierarchy instead.

We would have duplicates if class A defines some properties and its
subclass B does not define any, because class_b->props will be
left equal to class_a->props.

The solution here is to reintroduce the class_base_init TypeInfo
callback, that was present in one of the early QOM versions but
removed (on my request...) before committing.

This breaks global bus properties, an obscure feature when used
with the command-line which is actually useful and used when used by
backwards-compatible machine types.  So this patch also adjusts the
global bus properties in hw/pc_piix.c to refer to the abstract class.

Globals and other properties must be modified in the same patch to
avoid complications related to initialization ordering.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Simple code movement in order to simplify future refactoring.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Now that Object is a type, add an instance_init function and push
the "type" property from qdev to there.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Resolves a name conflict with the qdev "type" property that is about to
be moved to Object.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NMark Langsdorf <mark.langsdorf@calxeda.com>

This resolves a name conflict with the qdev "type" property that is
about to move into Object.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[AF: Add braces missing in original code.]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This protects against unwanted effects of changing TYPE_OBJECT from
NULL to a string.
Suggested-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

It's unused.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Right now the base Object class has a special NULL type.  Change this so
that we will be able to add class_init and class_base_init callbacks.
To do this, remove some special casing of ObjectClass that is not really
necessary.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The class_base_init TypeInfo callback was present in one of the early
QOM versions but removed (on my request...) before committing.  We
will need it soon, add it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

A utility function that will be used to implement hierarchical realization.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
[AF: Drop unrelated whitespace change, add Returns: in documentation]
[AF: Use new object_property_is_child() helper.]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Avoids hardcoding partial string comparisons.
Signed-off-by: NAlexander Barabash <alexander_barabash@mentor.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

This simple bit of functionality was missing and we'll need it soon,
so add it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
[AF: Document possible NULL return value]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Signed-off-by: Nmalc <av1474@comtv.ru>

File is targeted for install, but is never installed.
Signed-off-by: NBruce Rogers <brogers@suse.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>