- 13 3月, 2017 1 次提交
-
-
由 Eric Blake 提交于
The driver has failed to build since commit da34e65c, in qemu 2.6, due to a missing include of qapi/error.h for error_setg(). Since no one has complained in three releases, it is easier to remove the dead code than to keep it around, especially since it is not being built by default and therefore prone to bitrot. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 05 3月, 2017 1 次提交
-
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Message-Id: <1488544368-30622-4-git-send-email-armbru@redhat.com>
-
- 02 3月, 2017 2 次提交
-
-
由 Ben Warren 提交于
Signed-off-by: NBen Warren <ben@skyportsystems.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
-
由 Ben Warren 提交于
Also usable by upcoming VM Generation ID tests Signed-off-by: NBen Warren <ben@skyportsystems.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
-
- 24 2月, 2017 2 次提交
-
-
由 Alex Bennée 提交于
The docker framework is really just another piece in the build automation puzzle so lets merge it together. For added bonus I've also included the Travis and Patchew status links. The Shippable links will be added later once mainline tests have been configured and setup. Signed-off-by: NAlex Bennée <alex.bennee@linaro.org> Reviewed-by: NFam Zheng <famz@redhat.com> Message-Id: <20170220105139.21581-5-alex.bennee@linaro.org> Signed-off-by: NFam Zheng <famz@redhat.com>
-
由 Alex Bennée 提交于
Ostensibly Shippable offers a similar set of services as Travis. However they are focused on Docker container based work-flows so we can use our existing containers to run a few extra builds - in this case a bunch of cross-compiled targets on a Debian multiarch system. Signed-off-by: NAlex Bennée <alex.bennee@linaro.org> Reviewed-by: NFam Zheng <famz@redhat.com> Message-Id: <20170220105139.21581-4-alex.bennee@linaro.org> Signed-off-by: NFam Zheng <famz@redhat.com>
-
- 19 2月, 2017 2 次提交
-
-
由 Thomas Huth 提交于
I did some work with real ColdFire boards in the past, and after QOMifying most of the ColdFire devices recently, I feel confident that I could at least take care of odd fixes for these boards. Signed-off-by: NThomas Huth <huth@tuxfamily.org>
-
由 Thomas Huth 提交于
Since it is now possible to instantiate a CPU and RAM with the "none" machine, too, and a kernel can be loaded there with the generic loader device, there is no more need for the m68k "dummy" machine. Thus let's remove this unmaintained file now. Reviewed-by: NLaurent Vivier <laurent@vivier.eu> Signed-off-by: NThomas Huth <huth@tuxfamily.org>
-
- 14 2月, 2017 2 次提交
-
-
由 Amit Shah 提交于
I'm leaving my job at Red Hat, this email address will stop working next week. Update it to one that I will have access to later. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-Id: <1486120433-11628-1-git-send-email-amit.shah@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
由 Amit Shah 提交于
I'm switching jobs, and I'm not sure I can continue maintaining migration. Signed-off-by: NAmit Shah <amit.shah@redhat.com> Message-Id: <1486120416-11566-1-git-send-email-amit.shah@redhat.com> Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
- 31 1月, 2017 3 次提交
-
-
由 Marc-André Lureau 提交于
The following commits will split char.c in several files. Let's put them in a subdirectory. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
由 Marc-André Lureau 提交于
I consider to have enough experience with qemu-char to propose myself as maintainer. This will allow me to send pull request without waiting for Paolo. Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com> Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Hervé Poussineau 提交于
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
- 28 1月, 2017 2 次提交
-
-
由 Anthony PERARD 提交于
Signed-off-by: NAnthony PERARD <anthony.perard@citrix.com> Acked-by: NStefano Stabellini <sstabellini@kernel.org>
-
由 Peter Lieven 提交于
commit f57b4b5f moved qemu_iscsi_opts into vl.c. This made them invisible for qemu-img, qemu-nbd etc. Fixes: f57b4b5f Cc: qemu-stable@nongnu.org Signed-off-by: NPeter Lieven <pl@kamp.de> Message-Id: <1485262161-18543-1-git-send-email-pl@kamp.de> [Drop useless #ifdef. - Paolo] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 25 1月, 2017 2 次提交
-
-
由 Marek Vasut 提交于
Add remaining bits of the Altera NiosII R1 support into qemu, which is documentation, MAINTAINERS file entry, configure bits, arch_init and configuration files for both linux-user (userland binaries) and softmmu (hardware emulation). Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Chris Wulff <crwulff@gmail.com> Cc: Jeff Da Silva <jdasilva@altera.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Sandra Loosemore <sandra@codesourcery.com> Cc: Yves Vandervennet <yvanderv@altera.com> Reviewed-by: NAlexander Graf <agraf@suse.de> Message-Id: <20170118220146.489-8-marex@denx.de> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
由 Dr. David Alan Gilbert 提交于
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: NAmit Shah <amit.shah@redhat.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> Message-Id: <20170124100437.18200-1-dgilbert@redhat.com> Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
-
- 24 1月, 2017 2 次提交
-
-
由 Thomas Huth 提交于
The "Machine core" section sounds like a good match for this file. Signed-off-by: NThomas Huth <thuth@redhat.com> Message-Id: <1485150895-19753-1-git-send-email-thuth@redhat.com> Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com> Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
-
由 Richard Henderson 提交于
This is just about the minimum required to enable compilation without actually executing any instructions. This contains the HPPACPU structure and the required callbacks, the gdbstub, the basic translation loop, and a translate_one function that always results in an illegal instruction. Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
- 19 1月, 2017 2 次提交
-
-
由 Artyom Tarasenko 提交于
Remove the Niagara stub implementation from sun4u.c and add a machine, compatible with Legion simulator from the OpenSPARC T1 project. The machine uses the firmware supplied with the OpenSPARC T1 project, http://download.oracle.com/technetwork/systems/opensparc/OpenSPARCT1_Arch.1.5.tar.bz2 in the directory S10image/, and is able to boot the supplied Solaris 10 image. Note that for compatibility with the naming conventions for SPARC machines the new machine name is lowercase niagara. Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com> Reviewed-by: NRichard Henderson <rth@twiddle.net>
-
由 Artyom Tarasenko 提交于
Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
-
- 17 1月, 2017 1 次提交
-
-
由 Paolo Bonzini 提交于
Some stubs are used for user-mode emulation only; they are not needed by tools. Move them out of stubs/. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 09 1月, 2017 3 次提交
-
-
由 Eric Blake 提交于
These files deal with the file protocol, not the raw format (the file protocol is often used with other formats, and the raw format is not forced to use the file protocol). Rename things to make it a bit easier to follow. Suggested-by: NDaniel P. Berrange <berrange@redhat.com> Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NJohn Snow <jsnow@redhat.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Eric Blake 提交于
Given that we have raw-win32.c and raw-posix.c, my initial guess at raw_bsd.c was that it was for dealing with raw files using code specific to the BSD operating system (beyond what raw-posix could do). Not so - this name was chosen back in commit e1c66c6d to distinguish that it was a BSD licensed file, in contrast to the then-existing raw.c with an unclear and potentially unusable license. But since it has been more than three years since the rewrite, it's time to pick a more useful name for this file to avoid this type of confusion to future contributors that don't know the backstory, as none of our other files are named solely by the license they use. In reality, this file deals with the raw format, which is useful with any number of protocols, while raw-{win32,posix} deal with the file protocol (and in turn, that protocol is not limited to use with the raw format). So rename raw_bsd to raw-format.c. We could have also used the shorter name raw.c, except that collides with the earlier use of that filename for a different license, and it's better to be safe than risk license pollution. The next patch will also rename raw-win32.c and raw-posix.c to further distinguish the difference in roles. It doesn't hurt that this gets rid of an underscore in the filename, thereby making tab-completion on 'ra<TAB>' easier (now I don't have to type the shift key, which slows things down :) Suggested-by: NDaniel P. Berrange <berrange@redhat.com> Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLaszlo Ersek <lersek@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Andrew Jones 提交于
include/hw/arm/virt-acpi-build.h is only used for VirtGuestInfo, which doesn't even necessarily have to be ACPI specific. Move VirtGuestInfo to include/hw/arm/virt.h, allowing us to remove include/hw/arm/virt-acpi-build.h, and to prepare for even more code motion. Signed-off-by: NAndrew Jones <drjones@redhat.com> Reviewed-by: NIgor Mammedov <imammedo@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Message-id: 20170102200153.28864-9-drjones@redhat.com Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
- 21 12月, 2016 1 次提交
-
-
由 Thomas Huth 提交于
We've currently got 18 architectures in QEMU, and thus 18 target-xxx folders in the root folder of the QEMU source tree. More architectures (e.g. RISC-V, AVR) are likely to be included soon, too, so the main folder of the QEMU sources slowly gets quite overcrowded with the target-xxx folders. To disburden the main folder a little bit, let's move the target-xxx folders into a dedicated target/ folder, so that target-xxx/ simply becomes target/xxx/ instead. Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part] Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part] Acked-by: Michael Walle <michael@walle.cc> [lm32 part] Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part] Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part] Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part] Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part] Acked-by: Richard Henderson <rth@twiddle.net> [alpha part] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part] Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part] Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [crisµblaze part] Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part] Signed-off-by: NThomas Huth <thuth@redhat.com>
-
- 10 11月, 2016 6 次提交
-
-
由 Thomas Huth 提交于
There are only very old and orphaned stable branches listed in the MAINTAINERS file - so this section is pretty useless nowadays. Let's remove it. Reviewed-by: NJohn Snow <jsnow@redhat.com> Signed-off-by: NThomas Huth <thuth@redhat.com>
-
由 John Snow 提交于
These files are currently unmaintained. I'm proposing that Fam and I co-maintain them; under the model that whomever between us isn't authoring a given series will be responsible for reviewing it. Signed-off-by: NJohn Snow <jsnow@redhat.com> Acked-by: NFam Zheng <famz@redhat.com> Acked-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NThomas Huth <thuth@redhat.com>
-
由 Thomas Huth 提交于
I recently added new files to the source tree that are not covered by any maintainer yet -- and since every new source file should have a maintainer nowadays, I volunteer to look after these files now, too. Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NThomas Huth <thuth@redhat.com>
-
由 Thomas Huth 提交于
disas/m68k.c obviously belong to the m68k CPU section in the MAINTAINERS file, but remove the hw/m68k/ directory here since it only contains machine (not CPU) related files, as requested by Laurent. Add the machine related files to the right machine sections instead. Reviewed-by: NLaurent Vivier <laurent@vivier.eu> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NThomas Huth <thuth@redhat.com>
-
由 Thomas Huth 提交于
Both files seem to belong to the Sun4m machine. Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NThomas Huth <thuth@redhat.com>
-
由 Thomas Huth 提交于
The files w/cpu/a*mpcore.c are already assigned to the ARM CPU section, but the corresponding headers include/hw/cpu/a*mpcore.h are still missing. The file hw/*/imx* are already assigned to the i.MX31 machine, but the corresponding header files include/hw/*/imx* are still missing. The file hw/misc/arm_integrator_debug.c seems to belong to Integrator CP, hw/cpu/realview_mpcore.c seems to belong to Real View, and hw/misc/mst_fpga.c seems to belong to PXA2XX. And the files hw/misc/zynq* and include/hw/misc/zynq* seem to belong to the Xilinx Zynq machine. Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com> Acked-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NThomas Huth <thuth@redhat.com>
-
- 02 11月, 2016 2 次提交
-
-
由 Gonglei 提交于
This patch includes two parts: Cryptodev Backends and virtio-crypto stuff. I can maintain cryptodev backends which introduced by myself. For virtio-crypto stuff, I can share the work with Michael (The whole virtio supporter). Signed-off-by: NGonglei <arei.gonglei@huawei.com> Reviewed-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Pranith Kumar 提交于
Richard agreed to make odd fixes to PPC tcg parts[1]. This patch makes the change. [1] https://lists.gnu.org/archive/html/qemu-ppc/2016-03/msg00657.htmlSigned-off-by: NPranith Kumar <bobby.prani@gmail.com> Signed-off-by: NRichard Henderson <rth@twiddle.net>
-
- 30 10月, 2016 1 次提交
-
-
由 zhanghailiang 提交于
Add myself as co-maintainer of COLO framework, so that I can get CC'ed on future patches and bugs for this feature. Signed-off-by: Nzhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NAmit Shah <amit@amitshah.net>
-
- 28 10月, 2016 3 次提交
-
-
由 Laurent Vivier 提交于
Information about "qemu-trivial" ML can be found in the wiki: http://wiki.qemu.org/Contribute/TrivialPatches But the first place where a developer looks is the file MAINTAINERS. This also allows the get_maintainer.pl script to display the qemu-trivial ML address when the mail subject contains "trivial". Signed-off-by: NLaurent Vivier <laurent@vivier.eu> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Laurent Vivier 提交于
Add myself to be the M68K maintainer. Signed-off-by: NLaurent Vivier <laurent@vivier.eu> Reviewed-by: NThomas Huth <huth@tuxfamily.org>
-
由 Cédric Le Goater 提交于
This is the initial image of skiboot 5.3.7 (commit 762d0082) for the PowerPC PowerNV (Non-Virtualized) platform. Built from submodule. Signed-off-by: NCédric Le Goater <clg@kaod.org> Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
-
- 08 10月, 2016 2 次提交
-
-
由 Thomas Huth 提交于
hw/intc/sh_intc.c and hw/timer/sh_timer.c seem to belong to the R2D machine, as far as I can see. And concerning the Shix machine, it does not make much sense to have a "M:" entry here and the "S:" set to "Orphan". So I'd like to suggest to use "Odd Fixes" here instead. Signed-off-by: NThomas Huth <huth@tuxfamily.org> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-
由 Thomas Huth 提交于
The MIPS section is missing some related header files, and files in the hw/misc/, hw/intc/ and hw/timer/ folders. Signed-off-by: NThomas Huth <thuth@redhat.com> Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
-