nios2: Add support for Nios-II R1

Add remaining bits of the Altera NiosII R1 support into qemu, which
is documentation, MAINTAINERS file entry, configure bits, arch_init
and configuration files for both linux-user (userland binaries) and
softmmu (hardware emulation).
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Chris Wulff <crwulff@gmail.com>
Cc: Jeff Da Silva <jdasilva@altera.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Sandra Loosemore <sandra@codesourcery.com>
Cc: Yves Vandervennet <yvanderv@altera.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Message-Id: <20170118220146.489-8-marex@denx.de>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

MAINTAINERS

@@ -187,6 +187,14 @@ F: disas/moxie.c
 F: hw/moxie/
 F: default-configs/moxie-softmmu.mak
 
+NiosII
+M: Chris Wulff <crwulff@gmail.com>
+M: Marek Vasut <marex@denx.de>
+S: Maintained
+F: target/nios2/
+F: hw/nios2/
+F: disas/nios2.c
+
 OpenRISC
 M: Jia Liu <proljc@gmail.com>
 S: Maintained

arch_init.c

@@ -63,6 +63,8 @@ int graphic_depth = 32;
 #define QEMU_ARCH QEMU_ARCH_MIPS
 #elif defined(TARGET_MOXIE)
 #define QEMU_ARCH QEMU_ARCH_MOXIE
+#elif defined(TARGET_NIOS2)
+#define QEMU_ARCH QEMU_ARCH_NIOS2
 #elif defined(TARGET_OPENRISC)
 #define QEMU_ARCH QEMU_ARCH_OPENRISC
 #elif defined(TARGET_PPC)

configure

@@ -5935,6 +5935,8 @@ case "$target_name" in
   ;;
   moxie)
   ;;
+  nios2)
+  ;;
   or32)
     TARGET_ARCH=openrisc
     TARGET_BASE_ARCH=openrisc
@@ -6140,6 +6142,9 @@ for i in $ARCH $TARGET_BASE_ARCH ; do
   moxie*)
     disas_config "MOXIE"
   ;;
+  nios2)
+    disas_config "NIOS2"
+  ;;
   or32)
     disas_config "OPENRISC"
   ;;

default-configs/nios2-linux-user.mak

+# Default configuration for nios2-linux-user

default-configs/nios2-softmmu.mak

+# Default configuration for nios2-softmmu
+
+CONFIG_NIOS2=y
+CONFIG_SERIAL=y
+CONFIG_PTIMER=y
+CONFIG_ALTERA_TIMER=y

include/sysemu/arch_init.h

@@ -23,6 +23,7 @@ enum {
     QEMU_ARCH_UNICORE32 = (1 << 14),
     QEMU_ARCH_MOXIE = (1 << 15),
     QEMU_ARCH_TRICORE = (1 << 16),
+    QEMU_ARCH_NIOS2 = (1 << 17),
 };
 
 extern const uint32_t arch_type;

qemu-doc.texi

@@ -2901,6 +2901,9 @@ The binary format is detected automatically.
 @command{qemu-mips} TODO.
 @command{qemu-mipsel} TODO.
 
+@cindex user mode (NiosII)
+@command{qemu-nios2} TODO.
+
 @cindex user mode (PowerPC)
 @command{qemu-ppc64abi32} TODO.
 @command{qemu-ppc64} TODO.