- 09 11月, 2009 4 次提交
-
-
由 Isaku Yamahata 提交于
define a constant to represent a unmapped bar instead of -1 and use it. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Isaku Yamahata 提交于
use PCI_SLOT() and PCI_FUNC() where appropriate instead of direct use of bit operation. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Isaku Yamahata 提交于
introduce constant PCI_NUM_PINS for the number of interrupt pins, 4. and use it. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Isaku Yamahata 提交于
add missing ## in PCI_DPRINTF() to compile. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 10月, 2009 3 次提交
-
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
No users left. Also cleanup obsolete helper functions. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Initialization path will work with both converted and not-converted drivers, so we can convert drivers one by one. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 15 10月, 2009 1 次提交
-
-
由 Mark McLoughlin 提交于
Just use the name field instead since we now use the id paramater as the name, if supplied. Only implication with this change is that if id is not supplied, the value of the name paramater is used as an id. Patchworks-ID: 35512 Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 07 10月, 2009 5 次提交
-
-
由 Markus Armbruster 提交于
Like qdev_init(), but terminate program via hw_error() instead of returning an error value. Use it instead of qdev_init() where terminating the program on failure is okay, either because it's during machine construction, or because we know that failure can't happen. Because relying in the latter is somewhat unclean, and the former is not always obvious, it would be nice to go back to qdev_init() in the not-so-obvious cases, only with proper error handling. I'm leaving that for another day, because it involves making sure that error values are properly checked by all callers. Patchworks-ID: 35168 Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
But do so only where it may actually fail. Leave the rest for the next commit. Patchworks-ID: 35167 Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Michael S. Tsirkin 提交于
Making pci device cleanup msix automatically makes pci.c depend on msix.c, which is IMO messy. Since devices do msix_init it's easy and natural for them to also do msix_uninit. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Michael S. Tsirkin 提交于
PCI load routine has to be called with size equal to 256 (otherwise it will crash in weird ways). So assert this, making code clearer. Also avoid dynamically sized array on stack - good for portability. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Cc: Juan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
This reverts commit 0148fde5. As requested by Luiz. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 05 10月, 2009 14 次提交
-
-
由 Markus Armbruster 提交于
It's qdev_create() specialized for PCI, so name it accordingly. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Monitor command "pci_add ADDR nic model=MODEL" uses pci_nic_init() to create the NIC. When MODEL is unknown or "?", this prints to stderr and terminates the program. Change pci_nic_init() not to treat "?" specially, and to return NULL on failure. Switch uses during startup to new convenience wrapper pci_nic_init_nofail(), which behaves just like pci_nic_init() used to do. Bonus bug fix: we now check for qdev_init() failing there. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Before this patch, pci_nic_init() returns NULL when it can't find the model in pci_nic_models[]. Except this can't happen, because qemu_check_nic_model_list() just searched for model in pci_nic_models[], and terminated the program on failure. Repeating the search here is pointless. Instead, change qemu_check_nic_model_list() to return the model's array index. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Monitor command "pci_add ADDR storage ..." does its work in qemu_pci_hot_add_nic(). It called pci_create(..., ADDR) to create the device. That's wrong, because pci_create() terminates the program when ADDR is invalid. Use pci_get_bus_devfn() and pci_create_noinit() instead. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Michael S. Tsirkin 提交于
Reset BARs and a couple of other registers on bus reset, as per PCI spec. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Michael S. Tsirkin 提交于
refactor code slightly, adding symbolic constants and functions, and using macros where possible. This will also make following reset patches easier. No functional changes. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Create qdev infrastructure for pci hotplug. PCI bus implementations must register a handler for hotplug. Creating a new PCI device will automagically hot-plug it in case the PCI bus in question supports this. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
One more cleanup while being at it ;) Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
pci_unregister_device is static now and hooked into Devicestate->exit. qdev_free(pci_device) works now. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Luiz Capitulino 提交于
If the user issues one of the following commands to the Monitor: pci_add pci_addr=auto nic model=None pci_add pci_addr=auto nic model=? QEMU will exit, because the function used to perform sanity checks (qemu_check_nic_model_list()) exits on error. This function is used by the startup code, where it makes sense to exit on error, but in the Monitor it doesn't. Changing qemu_check_nic_model_list() to not exit on error is not possible though, as it's used by the board init code (the PC one), where all board specific code must have void return. The way I've chosen to fix this was to introduce a new function called pci_nic_supported(), which checks if the NIC is supported and returns true or false accordingly. The new function is used only by the Monitor, it performs the necessary check and returns an error in case the NIC is not supported, thus qemu_check_nic_model_list()'s exit is never trigged. The following should be observed: 1. Only the specified NIC is checked, the default one is assumed to be supported 2. The NIC query command (model=?) won't work with pci_add, the right way to do this with the Monitor is to add a new command Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
In a later patch, we introduce pre_save() and post_save() functions. The whole point of that operation is to change things in the state. Without this patch, we have to remove the const qualifier in each use with a cast Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 02 10月, 2009 2 次提交
-
-
由 Anthony Liguori 提交于
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 malc 提交于
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 16 9月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Like pci_create_simple() but doesn't call qdev_init(), so one can set properties before initializing the device. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 04 9月, 2009 2 次提交
-
-
由 Juan Quintela 提交于
piix_pci want to pass more things that the pic Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 8月, 2009 5 次提交
-
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
Sorry folks, but it has to be. One more of these invasive qdev patches. We have a serious design bug in the qdev interface: device init callbacks can't signal failure because the init() callback has no return value. This patch fixes it. We have already one case in-tree where this is needed: Try -device virtio-blk-pci (without drive= specified) and watch qemu segfault. This patch fixes it. With usb+scsi being converted to qdev we'll get more devices where the init callback can fail for various reasons. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
This uses a variant of buffer, with extra checks. Also uses the new support for cheking that a read value is less or equal than a field. Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
It is needed for VMState Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
This uses VARRAY and INT32_EQUAL values Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 11 8月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-Id:
-
- 27 7月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
Put the new property into use. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 21 7月, 2009 1 次提交
-
-
由 Blue Swirl 提交于
Thanks to Igor Kovalenko for a bugfix. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-